Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752433AbaGGPwT (ORCPT ); Mon, 7 Jul 2014 11:52:19 -0400 Received: from mail-la0-f44.google.com ([209.85.215.44]:65343 "EHLO mail-la0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751881AbaGGPwQ (ORCPT ); Mon, 7 Jul 2014 11:52:16 -0400 MIME-Version: 1.0 In-Reply-To: References: <1404022473-2862-1-git-send-email-borneo.antonio@gmail.com> Date: Mon, 7 Jul 2014 11:52:14 -0400 Message-ID: Subject: Re: [PATCH] HID: cp2112: add I2C mode From: Benjamin Tissoires To: Antonio Borneo Cc: Jiri Kosina , linux-input , David Barksdale , "linux-kernel@vger.kernel.org" Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, Jul 7, 2014 at 11:32 AM, Antonio Borneo wrote: > On Mon, Jul 7, 2014 at 9:57 PM, Benjamin Tissoires > wrote: >> Hi Antonio, >> >> On Sun, Jun 29, 2014 at 2:14 AM, Antonio Borneo >> wrote: >>> cp2112 supports single I2C read/write transactions. >>> It can't combine I2C transactions. >>> >>> Add master_xfer, using similar code flow as for smbus_xfer. >> >> Thanks for taking the time to implement it. I wanted to add this >> functionality, but did not found the time to finalize/submit the >> patches. >> So here is a review. > > Ciao Benjamin, > > thanks for the review. > My comments inline below > >>> >>> Signed-off-by: Antonio Borneo >>> --- >>> drivers/hid/hid-cp2112.c | 102 ++++++++++++++++++++++++++++++++++++++++++++++- >>> 1 file changed, 101 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c >>> index 3952d90..1260a8a 100644 >>> --- a/drivers/hid/hid-cp2112.c >>> +++ b/drivers/hid/hid-cp2112.c >>> @@ -429,6 +429,104 @@ static int cp2112_write_req(void *buf, u8 slave_address, u8 command, u8 *data, >>> return data_length + 4; >>> } >>> >>> +static int cp2112_i2c_write_req(void *buf, u8 slave_address, u8 *data, >>> + u8 data_length) >>> +{ >>> + struct cp2112_write_req_report *report = buf; >>> + >>> + if (data_length > sizeof(report->data)) >>> + return -EINVAL; >>> + >>> + report->report = CP2112_DATA_WRITE_REQUEST; >>> + report->slave_address = slave_address << 1; >>> + report->length = data_length; >>> + memcpy(report->data, data, data_length); >>> + return data_length + 3; >>> +} >>> + >>> +static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, >>> + int num) >>> +{ >>> + struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data; >>> + struct hid_device *hdev = dev->hdev; >>> + u8 buf[64]; >>> + ssize_t count; >>> + unsigned int retries; >>> + int ret; >>> + >>> + hid_dbg(hdev, "I2C %d messages\n", num); >>> + >>> + if (num != 1) { >>> + hid_err(hdev, >>> + "Multi-message I2C transactions not supported\n"); >> >> This is a shame. You can just externalize the following block (in pseudo code): >> { - read/write_req >> - hid_output >> - xfer_status >> - read} >> >> and then just use a for loop to call this sequence for each incoming message. > > The parameter "num" is for sending a "combined I2C transaction" in which > a series of messages is sent "without" stop-bits between the messages. > You can get full description searching for "i2c_transfer" in > - Documentation/i2c/writing-clients > - Documentation/i2c/i2c-protocol Alright, this convince me. > Since CP2112 does not support this feature, I return EOPNOTSUPP as is done in > drivers/i2c/busses/i2c-powermac.c > > If I implement the loop, as you suggest, CP2112 will just send a > sequence of independent messages, each with its own stop bit. > > Probably the error message could be more explicit by mentioning the > word "combined". > I lazily copied the same message from i2c-powermac think it's clear enough. No, I think the error message is fine. I just thought that we could "emulate" the combined transaction protocol by sending a bunch of single transactions. Given that the protocol is explicit regarding the stop, it is better not to emulate it and use the implementation you are proposing. > >> >>> + return -EOPNOTSUPP; >>> + } >>> + >>> + if (msgs->flags & I2C_M_RD) >>> + count = cp2112_read_req(buf, msgs->addr, msgs->len); >>> + else >>> + count = cp2112_i2c_write_req(buf, msgs->addr, msgs->buf, >>> + msgs->len); >>> + >>> + if (count < 0) >>> + return count; >>> + >>> + ret = hid_hw_power(hdev, PM_HINT_FULLON); >>> + if (ret < 0) { >>> + hid_err(hdev, "power management error: %d\n", ret); >>> + return ret; >>> + } >>> + >>> + ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT); >>> + if (ret < 0) { >>> + hid_warn(hdev, "Error starting transaction: %d\n", ret); >>> + goto power_normal; >>> + } >>> + >>> + for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) { >>> + ret = cp2112_xfer_status(dev); >>> + if (-EBUSY == ret) >>> + continue; >>> + if (ret < 0) >>> + goto power_normal; >>> + break; >>> + } >>> + >>> + if (XFER_STATUS_RETRIES <= retries) { >>> + hid_warn(hdev, "Transfer timed out, cancelling.\n"); >>> + buf[0] = CP2112_CANCEL_TRANSFER; >>> + buf[1] = 0x01; >>> + >>> + ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT); >>> + if (ret < 0) >>> + hid_warn(hdev, "Error cancelling transaction: %d\n", >>> + ret); >>> + >>> + ret = -ETIMEDOUT; >>> + goto power_normal; >>> + } >>> + >>> + if (!(msgs->flags & I2C_M_RD)) { >>> + ret = 0; >>> + goto power_normal; >>> + } >>> + >>> + ret = cp2112_read(dev, msgs->buf, msgs->len); >>> + if (ret < 0) >>> + goto power_normal; >>> + if (ret != msgs->len) { >>> + hid_warn(hdev, "short read: %d < %d\n", ret, msgs->len); >>> + ret = -EIO; >>> + goto power_normal; >>> + } >>> + >>> + ret = 0; >> >> ret = num; >> >>> +power_normal: >>> + hid_hw_power(hdev, PM_HINT_NORMAL); >>> + hid_dbg(hdev, "I2C transfer finished: %d\n", ret); >>> + return (ret) ? ret : 1; >> >> and "return ret;" > > Not sure I catch what you mean, here. Please confirm my understanding. > > From a comment inside include/linux/i2c.h > /* master_xfer should return the number of messages successfully > processed, or a negative value on error */ > > In the code above I set "ret" to an error number or to zero. > Then return the error number or the number of messages (equal to 1, as > explained above). > > Do you prefer I set "ret" directly to 1 instead of 0? Yep, just set ret to 1 instead of 0 (both at the end and right after the I2C_M_RD test). Then, ret will contain exactly either the number of messages processed, or the error. > > I can send a V2 for this. > In this case I would not change the debug message above that prints > "ret" and I will just print the current value for "ret". Yes, IMO, that makes more sense to print the exit value instead of changing it after. If you just do this small nitpicks in the V2, you can add my "Reviewed-by: Benjamin TIssoires " directly in your submission. Cheers, Benjamin > > Best Regards, > Antonio > >> >>> +} >>> + >>> static int cp2112_xfer(struct i2c_adapter *adap, u16 addr, >>> unsigned short flags, char read_write, u8 command, >>> int size, union i2c_smbus_data *data) >>> @@ -595,7 +693,8 @@ power_normal: >>> >>> static u32 cp2112_functionality(struct i2c_adapter *adap) >>> { >>> - return I2C_FUNC_SMBUS_BYTE | >>> + return I2C_FUNC_I2C | >>> + I2C_FUNC_SMBUS_BYTE | >>> I2C_FUNC_SMBUS_BYTE_DATA | >>> I2C_FUNC_SMBUS_WORD_DATA | >>> I2C_FUNC_SMBUS_BLOCK_DATA | >>> @@ -605,6 +704,7 @@ static u32 cp2112_functionality(struct i2c_adapter *adap) >>> } >>> >>> static const struct i2c_algorithm smbus_algorithm = { >>> + .master_xfer = cp2112_i2c_xfer, >>> .smbus_xfer = cp2112_xfer, >>> .functionality = cp2112_functionality, >>> }; >>> -- >>> 2.0.1 >>> >> >> Cheers, >> Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/