Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 25 Nov 2002 16:06:19 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 25 Nov 2002 16:06:19 -0500 Received: from p0279.as-l043.contactel.cz ([194.108.243.25]:40174 "EHLO SnowWhite.SuSE.cz") by vger.kernel.org with ESMTP id convert rfc822-to-8bit; Mon, 25 Nov 2002 16:06:17 -0500 To: linux-kernel@vger.kernel.org Subject: Re: PCI serial card with PCI 9052? References: <20021120095618.GB319@pazke.ipt> <20021124114307.A25408@flint.arm.linux.org.uk> <20021125094828.GA6016@pazke.ipt> From: Pavel@Janik.cz (Pavel =?iso-8859-2?q?Jan=EDk?=) X-Face: $"d&^B_IKlTHX!y2d,3;grhwjOBqOli]LV`6d]58%5'x/kBd7.MO&n3bJ@Zkf&RfBu|^qL+ ?/Re{MpTqanXS2'~Qp'J2p^M7uM:zp[1Xq#{|C!*'&NvCC[9!|=>#qHqIhroq_S"MH8nSH+d^9*BF: iHiAs(t(~b#1.{w.d[=Z Date: Mon, 25 Nov 2002 21:47:37 +0100 In-Reply-To: <20021125094828.GA6016@pazke.ipt> (Andrey Panin's message of "Mon, 25 Nov 2002 12:48:28 +0300") Message-ID: User-Agent: Gnus/5.090008 (Oort Gnus v0.08) Emacs/21.3.50 (i386-suse-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4091 Lines: 123 From: Andrey Panin Date: Mon, 25 Nov 2002 12:48:28 +0300 Hi Andrey, > patch looks good, but here is yet another thing to test. I think that this will be additional thing to do. Right now, I have this: --- linux-2.4.19/drivers/char/serial.c Sat Aug 3 02:39:43 2002 +++ serial.c Tue Nov 26 03:30:36 2002 @@ -139,8 +139,8 @@ #undef SERIAL_DEBUG_OPEN #undef SERIAL_DEBUG_FLOW #undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT -#undef SERIAL_DEBUG_PCI -#undef SERIAL_DEBUG_AUTOCONF +#define SERIAL_DEBUG_PCI +#define SERIAL_DEBUG_AUTOCONF /* Sanity checks */ @@ -4181,7 +4181,7 @@ #ifdef SERIAL_DEBUG_PCI printk(KERN_DEBUG " Subsystem ID %lx (intel 960)\n", - (unsigned long) board->subdevice); + (unsigned long) dev->subsystem_device); #endif /* is firmware started? */ pci_read_config_dword(dev, 0x44, (void*) &oldval); @@ -4340,6 +4340,7 @@ pbn_panacom2, pbn_panacom4, pbn_plx_romulus, + pbn_plx_9052, pbn_oxsemi, pbn_timedia, pbn_intel_i960, @@ -4425,6 +4426,8 @@ 0x400, 7, pci_plx9050_fn }, { SPCI_FL_BASE2, 4, 921600, /* pbn_plx_romulus */ 0x20, 2, pci_plx9050_fn, 0x03 }, + { SPCI_FL_BASE2, 2, 115200, /* pbn_plx_9052 */ + 0x8 }, /* This board uses the size of PCI Base region 0 to * signal now many ports are available */ { SPCI_FL_BASE0 | SPCI_FL_REGION_SZ_CAP, 32, 115200 }, /* pbn_oxsemi */ @@ -4707,6 +4710,9 @@ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, 0x10b5, 0x106a, 0, 0, pbn_plx_romulus }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + 0xd841, 0x0200, 0, 0, + pbn_plx_9052 }, { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b1_4_115200 }, kernel boots with: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled Testing ttyS0 (0x03f8, 0x0000)... Testing ttyS1 (0x02f8, 0x0000)... Testing ttyS2 (0x03e8, 0x0000)... serial: ttyS2: simple autoconfig failed (ff, ff) Testing ttyS3 (0x02e8, 0x0000)... serial: ttyS3: simple autoconfig failed (ff, ff) ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Entered probe_serial_pci() Setup PCI/PNP port: port fcf0, irq 9, type 0 Testing ttyS4 (0xfcf0, 0x0000)... ttyS04 at port 0xfcf0 (irq = 9) is a 16550A Setup PCI/PNP port: port fcf8, irq 9, type 0 Testing ttyS5 (0xfcf8, 0x0000)... ttyS05 at port 0xfcf8 (irq = 9) is a 16550A Leaving probe_serial_pci() (probe finished) /proc/pci contains: PCI devices found: Bus 0, device 0, function 0: Class 0000: PCI device 1106:0505 (rev 0). Bus 0, device 15, function 0: Class 0300: PCI device 5333:8811 (rev 0). Non-prefetchable 32 bit memory at 0xfe000000 [0xfe7fffff]. Bus 0, device 18, function 0: Class 0280: PCI device 10b5:9050 (rev 2). IRQ 9. Non-prefetchable 32 bit memory at 0xfedffc00 [0xfedffc7f]. I/O at 0xfc00 [0xfc7f]. I/O at 0xfcf0 [0xfcf7]. I/O at 0xfcf8 [0xfcff]. /proc/tty/driver/serial: serinfo:1.0 driver:5.05c revision:2001-07-08 0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0 RTS|DTR 1: uart:16550A port:2F8 irq:3 baud:9600 tx:0 rx:0 4: uart:16550A port:FCF0 irq:9 baud:9600 tx:40 rx:57 brk:2 oe:1 RTS|DTR|DSR 5: uart:16550A port:FCF8 irq:9 baud:9600 tx:5 rx:0 RTS|DTR There are two ports on that PCI card, ttyS4 and ttyS5. I have serial printer and serial mouse. Flags are dependant on the status of the port. Empty port: RTS | DTR. Printer plugged: RTS | CTS | DTR | DSR. Mouse plugged: RTS | DTR | DSR. So I think that the port is ready for communication. But I do not see anything coming from it :-( So the question now is: what should I do next? Trying to play with setserial? -- Pavel Jan?k Avoid unnecessary branches. -- The Elements of Programming Style (Kernighan & Plaugher) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/