Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754269AbaGHB0n (ORCPT ); Mon, 7 Jul 2014 21:26:43 -0400 Received: from seldrel01.sonyericsson.com ([212.209.106.2]:16459 "EHLO seldrel01.sonyericsson.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753576AbaGHB0e (ORCPT ); Mon, 7 Jul 2014 21:26:34 -0400 From: Bjorn Andersson To: Linus Walleij CC: , , , Subject: [PATCH 3/3] pinctrl: Introduce pinctrl driver for Qualcomm pm8xxx Date: Mon, 7 Jul 2014 18:26:25 -0700 Message-ID: <1404782785-1824-4-git-send-email-bjorn.andersson@sonymobile.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1404782785-1824-1-git-send-email-bjorn.andersson@sonymobile.com> References: <1404782785-1824-1-git-send-email-bjorn.andersson@sonymobile.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This introduces a pinctrl, pinconf, pinmux and gpio driver for the gpio block found in pm8018, pm8038, pm8058, pm8917 and pm8921 pmics from Qualcomm. Signed-off-by: Bjorn Andersson --- drivers/pinctrl/Kconfig | 11 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-pm8xxx-gpio.c | 796 +++++++++++++++++++++++++++++++++ 3 files changed, 808 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-pm8xxx-gpio.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 0042ccb..c173db6 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -278,6 +278,17 @@ config PINCTRL_DB8540 bool "DB8540 pin controller driver" depends on PINCTRL_NOMADIK && ARCH_U8500 +config PINCTRL_PM8XXX_GPIO + tristate "Qualcomm PM8xxx gpio driver" + depends on GPIOLIB && OF && (ARCH_QCOM || COMPILE_TEST) + select PINCONF + select PINMUX + select GENERIC_PINCONF + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm GPIO blocks found in the pm8018, pm8038, pm8058, pm8917 and + pm8921 pmics from Qualcomm. + config PINCTRL_ROCKCHIP bool select PINMUX diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index c4b5d40..806f6ad 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o +obj-$(CONFIG_PINCTRL_PM8XXX_GPIO) += pinctrl-pm8xxx-gpio.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ diff --git a/drivers/pinctrl/pinctrl-pm8xxx-gpio.c b/drivers/pinctrl/pinctrl-pm8xxx-gpio.c new file mode 100644 index 0000000..5aaf914 --- /dev/null +++ b/drivers/pinctrl/pinctrl-pm8xxx-gpio.c @@ -0,0 +1,796 @@ +/* + * Copyright (c) 2014, Sony Mobile Communications AB. + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "core.h" +#include "pinconf.h" +#include "pinctrl-utils.h" + +/* direction */ +#define PM8XXX_GPIO_DIR_OUT BIT(0) +#define PM8XXX_GPIO_DIR_IN BIT(1) + +/* output buffer */ +#define PM8XXX_GPIO_PUSH_PULL 0 +#define PM8XXX_GPIO_OPEN_DRAIN 1 + +/* bias */ +#define PM8XXX_GPIO_BIAS_PU_30 0 +#define PM8XXX_GPIO_BIAS_PU_1P5 1 +#define PM8XXX_GPIO_BIAS_PU_31P5 2 +#define PM8XXX_GPIO_BIAS_PU_1P5_30 3 +#define PM8XXX_GPIO_BIAS_PD 4 +#define PM8XXX_GPIO_BIAS_NP 5 + +/* GPIO registers */ +#define SSBI_REG_ADDR_GPIO_BASE 0x150 +#define SSBI_REG_ADDR_GPIO(n) (SSBI_REG_ADDR_GPIO_BASE + n) + +#define PM8XXX_GPIO_WRITE BIT(7) + +#define PM8XXX_MAX_GPIOS 44 + +struct pm8xxx_gpio_pin { + int irq; + + u8 power_source; + u8 direction; + u8 output_buffer; + u8 output_value; + u8 bias; + u8 output_strength; + u8 disable; + u8 function; + u8 non_inverted; +}; + +struct pm8xxx_gpio_data { + int ngpio; + const int *power_sources; + int npower_sources; +}; + +struct pm8xxx_gpio { + struct device *dev; + struct regmap *regmap; + struct pinctrl_dev *pctrl; + struct gpio_chip chip; + + const struct pm8xxx_gpio_data *data; + + struct pm8xxx_gpio_pin pins[PM8XXX_MAX_GPIOS]; +}; + +static const char * const pm8xxx_gpio_groups[PM8XXX_MAX_GPIOS] = { + "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", + "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", + "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43", + "gpio44", +}; + +static const char * const pm8xxx_gpio_functions[] = { + "normal", "paired", + "func1", "func2", + "dtest1", "dtest2", "dtest3", "dtest4", +}; + +static int pm8xxx_gpio_read(struct pm8xxx_gpio *pctrl, int pin, int bank) +{ + int reg = SSBI_REG_ADDR_GPIO(pin); + unsigned int val = bank << 4; + int ret; + + ret = regmap_write(pctrl->regmap, reg, val); + if (ret) { + dev_err(pctrl->dev, + "failed to select bank %d of pin %d\n", bank, pin); + return ret; + } + + ret = regmap_read(pctrl->regmap, reg, &val); + if (ret) { + dev_err(pctrl->dev, + "failed to read register %d of pin %d\n", bank, pin); + return ret; + } + + return val; +} + +static int pm8xxx_gpio_write(struct pm8xxx_gpio *pctrl, + int pin, int bank, u8 val) +{ + int ret; + + val |= PM8XXX_GPIO_WRITE; + val |= bank << 4; + + ret = regmap_write(pctrl->regmap, SSBI_REG_ADDR_GPIO(pin), val); + if (ret) + dev_err(pctrl->dev, "failed to write register\n"); + + return ret; +} + +static int pm8xxx_gpio_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->data->ngpio; +} + +static const char *pm8xxx_gpio_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + return pm8xxx_gpio_groups[group]; +} + +static const struct pinctrl_ops pm8xxx_gpio_pinctrl_ops = { + .get_groups_count = pm8xxx_gpio_get_groups_count, + .get_group_name = pm8xxx_gpio_get_group_name, + .dt_node_to_map = pinconf_generic_dt_node_to_map_group, + .dt_free_map = pinctrl_utils_dt_free_map, +}; + +static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(pm8xxx_gpio_functions); +} + +static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + return pm8xxx_gpio_functions[function]; +} + +static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const num_groups) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + + *groups = pm8xxx_gpio_groups; + *num_groups = pctrl->data->ngpio; + return 0; +} + +static int pm8xxx_pinmux_enable(struct pinctrl_dev *pctldev, + unsigned function, + unsigned group) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[group]; + u8 val; + + pin->function = function; + val = pin->function << 1; + + pm8xxx_gpio_write(pctrl, group, 4, val); + + return 0; +} + +static void pm8xxx_pinmux_disable(struct pinctrl_dev *pctldev, + unsigned function, + unsigned group) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[group]; + u8 val; + + pin->function = 0; + val = pin->function << 1; + + pm8xxx_gpio_write(pctrl, group, 4, val); +} + +static const struct pinmux_ops pm8xxx_pinmux_ops = { + .get_functions_count = pm8xxx_get_functions_count, + .get_function_name = pm8xxx_get_function_name, + .get_function_groups = pm8xxx_get_function_groups, + .enable = pm8xxx_pinmux_enable, + .disable = pm8xxx_pinmux_disable, +}; + +static int pm8xxx_gpio_config_get(struct pinctrl_dev *pctldev, + unsigned int offset, + unsigned long *config) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset]; + unsigned param = pinconf_to_config_param(*config); + unsigned arg; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + arg = pin->bias == PM8XXX_GPIO_BIAS_NP; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + arg = pin->bias == PM8XXX_GPIO_BIAS_PD; + break; + case PIN_CONFIG_BIAS_PULL_UP: + if (pin->bias >= PM8XXX_GPIO_BIAS_PU_30 && + pin->bias <= PM8XXX_GPIO_BIAS_PU_1P5_30) + arg = PM8XXX_GPIO_PULL_UP_30 + pin->bias; + else + arg = 0; + break; + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + arg = pin->disable; + break; + case PIN_CONFIG_INPUT_ENABLE: + arg = pin->direction == PM8XXX_GPIO_DIR_IN; + break; + case PIN_CONFIG_OUTPUT: + arg = pin->output_value; + break; + case PIN_CONFIG_POWER_SOURCE: + arg = pin->power_source; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + arg = pin->output_strength; + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + arg = pin->output_buffer == PM8XXX_GPIO_PUSH_PULL; + break; + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + arg = pin->output_buffer == PM8XXX_GPIO_OPEN_DRAIN; + break; + default: + dev_err(pctrl->dev, + "unsupported config parameter: %x\n", + param); + return -EINVAL; + } + + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int resolve_power_source(struct pm8xxx_gpio *pctrl, unsigned arg) +{ + const struct pm8xxx_gpio_data *data = pctrl->data; + int i; + + for (i = 0; i < data->npower_sources; i++) { + if (data->power_sources[i] == arg) + return i; + } + + dev_err(pctrl->dev, "invalid power source\n"); + return -EINVAL; +} + +static int pm8xxx_gpio_config_set(struct pinctrl_dev *pctldev, + unsigned int offset, + unsigned long *configs, + unsigned num_configs) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset]; + unsigned param; + unsigned arg; + unsigned i; + int ret; + u8 banks = 0; + u8 val; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + pin->bias = PM8XXX_GPIO_BIAS_NP; + banks |= BIT(2); + pin->disable = 0; + banks |= BIT(3); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + pin->bias = PM8XXX_GPIO_BIAS_PD; + banks |= BIT(2); + pin->disable = 0; + banks |= BIT(3); + break; + case PIN_CONFIG_BIAS_PULL_UP: + if (arg < PM8XXX_GPIO_PULL_UP_30 || + arg > PM8XXX_GPIO_PULL_UP_1P5_30) { + dev_err(pctrl->dev, "invalid pull-up level\n"); + return -EINVAL; + } + pin->bias = arg - PM8XXX_GPIO_BIAS_PU_30; + banks |= BIT(2); + pin->disable = 0; + banks |= BIT(3); + break; + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + pin->disable = 1; + banks |= BIT(3); + break; + case PIN_CONFIG_INPUT_ENABLE: + pin->direction = PM8XXX_GPIO_DIR_IN; + banks |= BIT(1); + break; + case PIN_CONFIG_OUTPUT: + pin->direction = PM8XXX_GPIO_DIR_OUT; + pin->output_value = !!arg; + banks |= BIT(1); + break; + case PIN_CONFIG_POWER_SOURCE: + /* Sanity check the power source */ + ret = resolve_power_source(pctrl, arg); + if (ret < 0) + return ret; + pin->power_source = arg; + banks |= BIT(0); + break; + case PIN_CONFIG_DRIVE_STRENGTH: + if (arg > PM8XXX_GPIO_STRENGTH_LOW) { + dev_err(pctrl->dev, "invalid drive strength\n"); + return -EINVAL; + } + pin->output_strength = arg; + banks |= BIT(3); + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + pin->output_buffer = PM8XXX_GPIO_PUSH_PULL; + banks |= BIT(1); + break; + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + pin->output_buffer = PM8XXX_GPIO_OPEN_DRAIN; + banks |= BIT(1); + break; + default: + dev_err(pctrl->dev, + "unsupported config parameter: %x\n", + param); + return -EINVAL; + } + } + + if (banks & BIT(0)) { + ret = resolve_power_source(pctrl, pin->power_source); + pm8xxx_gpio_write(pctrl, offset, 0, ret << 1); + } + + if (banks & BIT(1)) { + val = pin->direction << 2; + val |= pin->output_buffer << 1; + val |= pin->output_value; + pm8xxx_gpio_write(pctrl, offset, 1, val); + } + + if (banks & BIT(2)) { + val = pin->bias << 1; + pm8xxx_gpio_write(pctrl, offset, 2, val); + } + + if (banks & BIT(3)) { + val = pin->output_strength << 2; + val |= pin->disable; + pm8xxx_gpio_write(pctrl, offset, 3, val); + } + + if (banks & BIT(4)) { + val = pin->function << 1; + pm8xxx_gpio_write(pctrl, offset, 4, val); + } + + if (banks & BIT(5)) { + val = 0; + if (pin->non_inverted) + val |= BIT(3); + pm8xxx_gpio_write(pctrl, offset, 5, val); + } + + return 0; +} + +static const struct pinconf_ops pm8xxx_gpio_pinconf_ops = { + .pin_config_group_get = pm8xxx_gpio_config_get, + .pin_config_group_set = pm8xxx_gpio_config_set, +}; + +static struct pinctrl_desc pm8xxx_gpio_desc = { + .pctlops = &pm8xxx_gpio_pinctrl_ops, + .pmxops = &pm8xxx_pinmux_ops, + .confops = &pm8xxx_gpio_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int pm8xxx_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct pm8xxx_gpio *pctrl = container_of(chip, struct pm8xxx_gpio, chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + u8 val; + + pin->direction = PM8XXX_GPIO_DIR_IN; + val = pin->direction << 2; + + pm8xxx_gpio_write(pctrl, offset, 1, val); + + return 0; +} + +static int pm8xxx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, + int value) +{ + struct pm8xxx_gpio *pctrl = container_of(chip, struct pm8xxx_gpio, chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + u8 val; + + pin->direction = PM8XXX_GPIO_DIR_OUT; + pin->output_value = !!value; + + val = pin->direction << 2; + val |= pin->output_buffer << 1; + val |= pin->output_value; + + pm8xxx_gpio_write(pctrl, offset, 1, val); + + return 0; +} + +static int pm8xxx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct pm8xxx_gpio *pctrl = container_of(chip, struct pm8xxx_gpio, chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + + if (pin->direction == PM8XXX_GPIO_DIR_OUT) + return pin->output_value; + else + return pm8xxx_read_irq_status(pin->irq); +} + +static void pm8xxx_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct pm8xxx_gpio *pctrl = container_of(gc, struct pm8xxx_gpio, chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + u8 val; + + pin->output_value = !!value; + + val = pin->direction << 2; + val |= pin->output_buffer << 1; + val |= pin->output_value; + + pm8xxx_gpio_write(pctrl, offset, 1, val); +} + +static int pm8xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct pm8xxx_gpio *pctrl = container_of(chip, struct pm8xxx_gpio, chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + + return pin->irq; +} + +#ifdef CONFIG_DEBUG_FS +#include + +static void pm8xxx_gpio_dbg_show_one(struct seq_file *s, + struct pinctrl_dev *pctldev, + struct gpio_chip *chip, + unsigned offset, + unsigned gpio) +{ + struct pm8xxx_gpio *pctrl = container_of(chip, struct pm8xxx_gpio, chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset]; + + static const char * const directions[] = { + "off", "out", "in", "both" + }; + static const char * const sources[] = { + "bb", "l2", "l3", "l4", "l5", "l6", "l7", "l8", "l11", + "l14", "l15", "l17", "s3", "s4", "vph" + }; + static const char * const biases[] = { + "pull-up 30uA", "pull-up 1.5uA", "pull-up 31.5uA", + "pull-up 1.5uA + 30uA boost", "pull-down 10uA", "no pull" + }; + static const char * const buffer_types[] = { + "push-pull", "open-drain" + }; + static const char * const strengths[] = { + "no", "high", "medium", "low" + }; + + seq_printf(s, " gpio%-2d:", offset + 1); + if (pin->disable) { + seq_puts(s, " ---"); + } else { + seq_printf(s, " %-4s", directions[pin->direction]); + seq_printf(s, " %-7s", pm8xxx_gpio_functions[pin->function]); + seq_printf(s, " %-3s", sources[pin->power_source]); + seq_printf(s, " %-27s", biases[pin->bias]); + seq_printf(s, " %-10s", buffer_types[pin->output_buffer]); + seq_printf(s, " %-4s", pin->output_value ? "high" : "low"); + seq_printf(s, " %-7s", strengths[pin->output_strength]); + if (!pin->non_inverted) + seq_puts(s, " inverted"); + } +} + +static void pm8xxx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + unsigned gpio = chip->base; + unsigned i; + + for (i = 0; i < chip->ngpio; i++, gpio++) { + pm8xxx_gpio_dbg_show_one(s, NULL, chip, i, gpio); + seq_puts(s, "\n"); + } +} + +#else +#define msm_gpio_dbg_show NULL +#endif + +static struct gpio_chip pm8xxx_gpio_template = { + .direction_input = pm8xxx_gpio_direction_input, + .direction_output = pm8xxx_gpio_direction_output, + .get = pm8xxx_gpio_get, + .set = pm8xxx_gpio_set, + .to_irq = pm8xxx_gpio_to_irq, + .dbg_show = pm8xxx_gpio_dbg_show, + .owner = THIS_MODULE, +}; + +static int pm8xxx_gpio_populate(struct pm8xxx_gpio *pctrl) +{ + const struct pm8xxx_gpio_data *data = pctrl->data; + struct pm8xxx_gpio_pin *pin; + int val; + int i; + + for (i = 0; i < pctrl->data->ngpio; i++) { + pin = &pctrl->pins[i]; + + val = pm8xxx_gpio_read(pctrl, i, 0); + if (val < 0) + return val; + + pin->power_source = data->power_sources[(val >> 1) & 0x7]; + + val = pm8xxx_gpio_read(pctrl, i, 1); + if (val < 0) + return val; + + pin->direction = (val >> 2) & 0x3; + pin->output_buffer = !!(val & BIT(1)); + pin->output_value = val & BIT(0); + + val = pm8xxx_gpio_read(pctrl, i, 2); + if (val < 0) + return val; + + pin->bias = (val >> 1) & 0x7; + + val = pm8xxx_gpio_read(pctrl, i, 3); + if (val < 0) + return val; + + pin->output_strength = (val >> 2) & 0x3; + pin->disable = val & BIT(0); + + val = pm8xxx_gpio_read(pctrl, i, 4); + if (val < 0) + return val; + + pin->function = (val >> 1) & 0x7; + + val = pm8xxx_gpio_read(pctrl, i, 5); + if (val < 0) + return val; + + pin->non_inverted = !!(val & BIT(3)); + } + + return 0; +} + +static const struct pm8xxx_gpio_data pm8018_gpio_data = { + .ngpio = 6, + .power_sources = (int[]) { + PM8XXX_GPIO_VIN_L4, PM8XXX_GPIO_VIN_L14, PM8XXX_GPIO_VIN_S3, + PM8XXX_GPIO_VIN_L6, PM8XXX_GPIO_VIN_L2, PM8XXX_GPIO_VIN_L5, + PM8XXX_GPIO_VIN_L8, PM8XXX_GPIO_VIN_VPH + }, + .npower_sources = 8, +}; + +static const struct pm8xxx_gpio_data pm8038_gpio_data = { + .ngpio = 12, + .power_sources = (int[]) { + PM8XXX_GPIO_VIN_VPH, PM8XXX_GPIO_VIN_BB, PM8XXX_GPIO_VIN_L11, + PM8XXX_GPIO_VIN_L15, PM8XXX_GPIO_VIN_L4, PM8XXX_GPIO_VIN_L3, + PM8XXX_GPIO_VIN_L17 + }, + .npower_sources = 7, +}; + +static const struct pm8xxx_gpio_data pm8058_gpio_data = { + .ngpio = 40, + .power_sources = (int[]) { + PM8XXX_GPIO_VIN_VPH, PM8XXX_GPIO_VIN_BB, PM8XXX_GPIO_VIN_S3, + PM8XXX_GPIO_VIN_L3, PM8XXX_GPIO_VIN_L7, PM8XXX_GPIO_VIN_L6, + PM8XXX_GPIO_VIN_L5, PM8XXX_GPIO_VIN_L2 + }, + .npower_sources = 8, +}; +static const struct pm8xxx_gpio_data pm8917_gpio_data = { + .ngpio = 38, + .power_sources = (int[]) { + PM8XXX_GPIO_VIN_VPH, PM8XXX_GPIO_VIN_BB, PM8XXX_GPIO_VIN_S4, + PM8XXX_GPIO_VIN_L15, PM8XXX_GPIO_VIN_L4, PM8XXX_GPIO_VIN_L3, + PM8XXX_GPIO_VIN_L17 + }, + .npower_sources = 7, +}; + +static const struct pm8xxx_gpio_data pm8921_gpio_data = { + .ngpio = 44, + .power_sources = (int[]) { + PM8XXX_GPIO_VIN_VPH, PM8XXX_GPIO_VIN_BB, PM8XXX_GPIO_VIN_S4, + PM8XXX_GPIO_VIN_L15, PM8XXX_GPIO_VIN_L4, PM8XXX_GPIO_VIN_L3, + PM8XXX_GPIO_VIN_L17 + }, + .npower_sources = 7, +}; + +static const struct of_device_id pm8xxx_gpio_of_match[] = { + { .compatible = "qcom,pm8018-gpio", .data = &pm8018_gpio_data }, + { .compatible = "qcom,pm8038-gpio", .data = &pm8038_gpio_data }, + { .compatible = "qcom,pm8058-gpio", .data = &pm8058_gpio_data }, + { .compatible = "qcom,pm8917-gpio", .data = &pm8917_gpio_data }, + { .compatible = "qcom,pm8921-gpio", .data = &pm8921_gpio_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, pm8xxx_gpio_of_match); + +static int pm8xxx_gpio_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct pm8xxx_gpio *pctrl; + int ret; + int i; + + match = of_match_node(pm8xxx_gpio_of_match, pdev->dev.of_node); + if (!match) + return -ENXIO; + + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->dev = &pdev->dev; + pctrl->data = match->data; + + BUG_ON(pctrl->data->ngpio > PM8XXX_MAX_GPIOS); + + pctrl->chip = pm8xxx_gpio_template; + pctrl->chip.base = -1; + pctrl->chip.dev = &pdev->dev; + pctrl->chip.of_node = pdev->dev.of_node; + pctrl->chip.label = dev_name(pctrl->dev); + pctrl->chip.ngpio = pctrl->data->ngpio; + + pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!pctrl->regmap) { + dev_err(&pdev->dev, "parent regmap unavailable\n"); + return -ENXIO; + } + + for (i = 0; i < pctrl->data->ngpio; i++) { + ret = platform_get_irq(pdev, i); + if (ret < 0) { + dev_err(&pdev->dev, + "missing interrupts for pin %d\n", i); + return ret; + } + + pctrl->pins[i].irq = ret; + } + + ret = pm8xxx_gpio_populate(pctrl); + if (ret) + return ret; + + pm8xxx_gpio_desc.name = dev_name(&pdev->dev); + pctrl->pctrl = pinctrl_register(&pm8xxx_gpio_desc, &pdev->dev, pctrl); + if (!pctrl->pctrl) { + dev_err(&pdev->dev, "couldn't register pm8xxx gpio driver\n"); + return -ENODEV; + } + + ret = gpiochip_add(&pctrl->chip); + if (ret) { + dev_err(&pdev->dev, "failed register gpiochip\n"); + goto unregister_pinctrl; + } + + ret = gpiochip_add_pin_range(&pctrl->chip, + dev_name(pctrl->dev), + 1, 0, pctrl->data->ngpio); + if (ret) { + dev_err(pctrl->dev, "failed to add pin range\n"); + goto unregister_gpiochip; + } + + platform_set_drvdata(pdev, pctrl); + + dev_dbg(&pdev->dev, "Qualcomm pm8xxx gpio driver probed\n"); + + return 0; + +unregister_pinctrl: + pinctrl_unregister(pctrl->pctrl); + +unregister_gpiochip: + if (gpiochip_remove(&pctrl->chip)) + dev_err(&pdev->dev, "unable to unregister gpiochip\n"); + + return ret; +} + +static int pm8xxx_gpio_remove(struct platform_device *pdev) +{ + struct pm8xxx_gpio *pctrl = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&pctrl->chip); + if (ret) { + dev_err(&pdev->dev, "failed to remove gpiochip\n"); + return ret; + } + + pinctrl_unregister(pctrl->pctrl); + + return 0; +} + +static struct platform_driver pm8xxx_gpio_driver = { + .driver = { + .name = "pm8xxx_gpio", + .owner = THIS_MODULE, + .of_match_table = pm8xxx_gpio_of_match, + }, + .probe = pm8xxx_gpio_probe, + .remove = pm8xxx_gpio_remove, +}; + +module_platform_driver(pm8xxx_gpio_driver); + +MODULE_AUTHOR("Bjorn Andersson "); +MODULE_DESCRIPTION("Qualcomm PM8xxx GPIO driver"); +MODULE_LICENSE("GPL v2"); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/