Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754297AbaGIGxg (ORCPT ); Wed, 9 Jul 2014 02:53:36 -0400 Received: from rtits2.realtek.com ([60.250.210.242]:53617 "EHLO rtits2.realtek.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753377AbaGIGxe (ORCPT ); Wed, 9 Jul 2014 02:53:34 -0400 X-SpamFilter-By: BOX Solutions SpamTrap 5.39 with qID s696rQ13026900, This message is accepted by code: ctloc85258 From: Hayes Wang To: CC: , , , Hayes Wang Subject: [PATCH net v2] r8169: disable L23 Date: Wed, 9 Jul 2014 14:52:51 +0800 Message-ID: <1394712342-15778-7-Taiwan-albertk@realtek.com> X-Mailer: Microsoft Office Outlook 11 In-Reply-To: <1394712342-15778-6-Taiwan-albertk@realtek.com> References: <1394712342-15778-6-Taiwan-albertk@realtek.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [172.21.71.44] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org For RTL8411, RTL8111G, RTL8402, RTL8105, and RTL8106, disable the feature of entering the L2/L3 link state of the PCIe. When the nic starts the process of entering the L2/L3 link state and the PCI reset occurs before the work is finished, the work would be queued and continue after the next the PCI reset occurs. This causes the device stays in L2/L3 link state, and the system couldn't find the device. Signed-off-by: Hayes Wang --- drivers/net/ethernet/realtek/r8169.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index be425ad..38144ee 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -538,6 +538,7 @@ enum rtl_register_content { MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */ LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */ Jumbo_En0 = (1 << 2), /* 8168 only. Reserved in the 8168b */ + Rdy_to_L23 = (1 << 1), /* L23 Enable */ Beacon_en = (1 << 0), /* 8168 only. Reserved in the 8168b */ /* Config4 register */ @@ -4897,6 +4898,21 @@ static void rtl_enable_clock_request(struct pci_dev *pdev) PCI_EXP_LNKCTL_CLKREQ_EN); } +static void rtl_l23_enable(struct rtl8169_private *tp, bool enable) +{ + void __iomem *ioaddr = tp->mmio_addr; + u8 data; + + data = RTL_R8(Config3); + + if (enable) + data |= Rdy_to_L23; + else + data &= ~Rdy_to_L23; + + RTL_W8(Config3, data); +} + #define R8168_CPCMD_QUIRK_MASK (\ EnableBist | \ Mac_dbgo_oe | \ @@ -5246,6 +5262,7 @@ static void rtl_hw_start_8411(struct rtl8169_private *tp) }; rtl_hw_start_8168f(tp); + rtl_l23_enable(tp, false); rtl_ephy_init(tp, e_info_8168f_1, ARRAY_SIZE(e_info_8168f_1)); @@ -5284,6 +5301,8 @@ static void rtl_hw_start_8168g_1(struct rtl8169_private *tp) rtl_w1w0_eri(tp, 0x2fc, ERIAR_MASK_0001, 0x01, 0x06, ERIAR_EXGMAC); rtl_w1w0_eri(tp, 0x1b0, ERIAR_MASK_0011, 0x0000, 0x1000, ERIAR_EXGMAC); + + rtl_l23_enable(tp, false); } static void rtl_hw_start_8168g_2(struct rtl8169_private *tp) @@ -5536,6 +5555,8 @@ static void rtl_hw_start_8105e_1(struct rtl8169_private *tp) RTL_W8(DLLPR, RTL_R8(DLLPR) | PFM_EN); rtl_ephy_init(tp, e_info_8105e_1, ARRAY_SIZE(e_info_8105e_1)); + + rtl_l23_enable(tp, false); } static void rtl_hw_start_8105e_2(struct rtl8169_private *tp) @@ -5571,6 +5592,8 @@ static void rtl_hw_start_8402(struct rtl8169_private *tp) rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC); rtl_eri_write(tp, 0xb8, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC); rtl_w1w0_eri(tp, 0x0d4, ERIAR_MASK_0011, 0x0e00, 0xff00, ERIAR_EXGMAC); + + rtl_l23_enable(tp, false); } static void rtl_hw_start_8106(struct rtl8169_private *tp) @@ -5583,6 +5606,8 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp) RTL_W32(MISC, (RTL_R32(MISC) | DISABLE_LAN_EN) & ~EARLY_TALLY_EN); RTL_W8(MCU, RTL_R8(MCU) | EN_NDP | EN_OOB_RESET); RTL_W8(DLLPR, RTL_R8(DLLPR) & ~PFM_EN); + + rtl_l23_enable(tp, false); } static void rtl_hw_start_8101(struct net_device *dev) -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/