Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752949AbaGKGWp (ORCPT ); Fri, 11 Jul 2014 02:22:45 -0400 Received: from mail-pd0-f176.google.com ([209.85.192.176]:56764 "EHLO mail-pd0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751344AbaGKGWn (ORCPT ); Fri, 11 Jul 2014 02:22:43 -0400 From: Gavin Guo To: sarah.a.sharp@linux.intel.com, mathias.nyman@intel.com, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Cc: yk@canonical.com, anthony.wong@canonical.com, gerald.yang@canonical.com Subject: [PATCH 0/1] Fixes to the USB 3.0 detection as 2.0 on AMD platform Date: Fri, 11 Jul 2014 14:22:35 +0800 Message-Id: <1405059756-11983-1-git-send-email-gavin.guo@canonical.com> X-Mailer: git-send-email 2.0.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Sarah and Mathias, As the discussion in http://comments.gmane.org/gmane.linux.usb.general/107011, I found that [AMD] FCH USB XHCI Controller [1022:7814] the USB 3.0 disk can't work in SuperSpeed after several times of hotplug. After doing some experiments and bisection, I found the bug is caused by 41e7e056cdc662f704fa9262e5c6e213b4ab45dd (USB: Allow USB 3.0 ports to be disabled.). And the bug can be fixed by not executing the hub_usb3_port_disable() function. I also found that the port status is already in RxDetect before setting the port to Disabled in hub_usb3_port_disable() function. So, there are 2 ways to fix the bug: 1) Check if the Vendor/Device id is [1022:7814] at the beginning of hub_usb3_port_disable() function. If yes, return without executing the remaining code. 2) Check if the port status is already in RxDetect, if yes, return without executing the remaining code. The second method seems more reasonable, so the patch is the implementation of the second one. But it will affect more platforms and I don't know if there'll be any negative result. Otherwise, if the first one is correct, I can reimplement a new one. I'm appreciated if you can give me some advice, or if there is any thing I missed. Thanks, Gavin Gavin Guo (1): usb: Check if port status is equal to RxDetect drivers/usb/core/hub.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/