Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754773AbaGNLhO (ORCPT ); Mon, 14 Jul 2014 07:37:14 -0400 Received: from bhuna.collabora.co.uk ([93.93.135.160]:45139 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754736AbaGNLhD (ORCPT ); Mon, 14 Jul 2014 07:37:03 -0400 From: Javier Martinez Canillas To: Lee Jones Cc: Mark Brown , Mike Turquette , Liam Girdwood , Alessandro Zummo , Kukjin Kim , Doug Anderson , Olof Johansson , Tomeu Vizoso , Krzysztof Kozlowski , Yadwinder Singh Brar , Tushar Behera , Andreas Farber , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas Subject: [PATCH v8 02/13] mfd: max77802: Add DT binding documentation Date: Mon, 14 Jul 2014 13:35:58 +0200 Message-Id: <1405337769-3741-3-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.0.0.rc2 In-Reply-To: <1405337769-3741-1-git-send-email-javier.martinez@collabora.co.uk> References: <1405337769-3741-1-git-send-email-javier.martinez@collabora.co.uk> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add Device Tree binding documentation for Maxim 77802 PMIC. Signed-off-by: Javier Martinez Canillas --- Changes since v7: - Remove information about DVS since that will be added as a follow up. Changes since v6: None Changes since v5: - Use max77686,* properties instead of max77802,* since the support is now in the max77686 driver and that IP defined the properties first. - Fix issues in DT binding documentation. Suggested by Andreas Farber. Changes since v4: None Changes since v3: None Changes since v2: - Explain better the Dynamic Voltage Scaling (DVS) support in some Buck regulators and the max77802,pmic-buck-{dvs,selb}-gpios properties. Suggested by Mark Brown. --- Documentation/devicetree/bindings/mfd/max77802.txt | 59 ++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt new file mode 100644 index 0000000..9f72b8f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77802.txt @@ -0,0 +1,59 @@ +Maxim MAX77802 multi-function device + +MAX77802 is a Multifunction device with PMIC, RTC and Charger on chip. It is +interfaced to host controller using i2c interface. PMIC, Charger and RTC +submodules are addressed using same i2c slave address. + +This document describes the binding for mfd device and PMIC submodule. + +Binding for the built-in 32k clock generator block is defined separately +in bindings/clk/maxim,max77802.txt file. + +Required properties: +- compatible : Must be "maxim,max77802"; +- reg : Specifies the i2c slave address of PMIC block. +- interrupts : This i2c device has an IRQ line connected to the main SoC. +- interrupt-parent : The parent interrupt controller. + +Optional node: +- regulators : The regulators of max77802 have to be instantiated + under subnode named "regulators" using the following format. + + regulator-name { + standard regulator constraints.... + }; + refer Documentation/devicetree/bindings/regulator/regulator.txt + + The regulator node name should be initialized with a string +to get matched with their hardware counterparts as follow. The valid names are: + + -LDOn : for LDOs, where n can lie in range 1 to 35. + example: LDO1, LDO2, LDO35. + -BUCKn : for BUCKs, where n can lie in range 1 to 10. + example: BUCK1, BUCK5, BUCK10. +Example: + + max77802@09 { + compatible = "maxim,max77802"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + #address-cells = <1>; + #size-cells = <0>; + + regulators { + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + }; -- 2.0.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/