Date: Mon, 14 Jul 2014 15:28:37 +0200
From: Michael Grzeschik <mgr@pengutronix.de>
To: linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, dwmw2@infradead.org, kernel@pengutronix.de
Subject: Re: [PATH v2] mxc_nand: use our own read_page function
Message-ID: <20140714132837.GB3941@pengutronix.de>
References: <1403815368-29469-2-git-send-email-m.grzeschik@pengutronix.de>
 <1403865524-25061-1-git-send-email-m.grzeschik@pengutronix.de>
 <20140705144521.GA16653@pengutronix.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20140705144521.GA16653@pengutronix.de>
User-Agent: Mutt/1.5.21 (2010-09-15)
Sender: linux-kernel-owner@vger.kernel.org

@David: Ping!

Some comments on this patch would probably help to get it mainline. :)

Regards,
Michael

On Sat, Jul 05, 2014 at 04:45:21PM +0200, Michael Grzeschik wrote:
> Ping!
> 
> On Fri, Jun 27, 2014 at 12:38:44PM +0200, Michael Grzeschik wrote:
> > The current approach of the read_page function is to iterate over all
> > subpages and call the correct_data function. The correct_data function
> > currently does the same. It iterates over all subpages and checks for
> > correctable and uncorrectable data. This redundant call for each
> > subpage leads to miscalculations.
> > 
> > This patch changes the driver to use its own read_page function in which
> > we call the correct_data function only once per page. With that we do
> > the failure and correct statistics counting inside this function.
> > 
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > ---
> > fixed printk to pr_debug
> > 
> >  drivers/mtd/nand/mxc_nand.c | 73 ++++++++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 69 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
> > index a72d508..5f9e36d 100644
> > --- a/drivers/mtd/nand/mxc_nand.c
> > +++ b/drivers/mtd/nand/mxc_nand.c
> > @@ -141,6 +141,8 @@ struct mxc_nand_host;
> >  
> >  struct mxc_nand_devtype_data {
> >  	void (*preset)(struct mtd_info *);
> > +	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
> > +			uint8_t *buf, int oob_required, int page);
> >  	void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
> >  	void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
> >  	void (*send_page)(struct mtd_info *, unsigned int);
> > @@ -649,6 +651,59 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
> >  	return 0;
> >  }
> >  
> > +/**
> > + * mxc_nand_read_page_hwecc_v2_v3 - [REPLACEABLE] hardware ECC based page read function
> > + * @mtd: mtd info structure
> > + * @chip: nand chip info structure
> > + * @buf: buffer to store read data
> > + * @oob_required: caller requires OOB data read to chip->oob_poi
> > + * @page: page number to read
> > + *
> > + * Not for syndrome calculating ECC controllers which need a special oob layout.
> > + */
> > +static int
> > +mxc_nand_read_page_hwecc_v2_v3(struct mtd_info *mtd,
> > +			       struct nand_chip *chip,
> > +			       uint8_t *buf, int oob_required, int page)
> > +{
> > +	int i, eccsize = chip->ecc.size;
> > +	struct nand_chip *nand_chip = mtd->priv;
> > +	struct mxc_nand_host *host = nand_chip->priv;
> > +	int eccbytes = chip->ecc.bytes;
> > +	int eccsteps = chip->ecc.steps;
> > +	uint8_t *p = buf;
> > +	uint8_t *ecc_calc = chip->buffers->ecccalc;
> > +	uint8_t *ecc_code = chip->buffers->ecccode;
> > +	uint32_t *eccpos = chip->ecc.layout->eccpos;
> > +	unsigned int max_bitflips = 0;
> > +	u32 ecc_stat, err;
> > +	int stat;
> > +
> > +	ecc_stat = host->devtype_data->get_ecc_status(host);
> > +	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
> > +		err = ecc_stat & 0xf;
> > +		chip->ecc.hwctl(mtd, NAND_ECC_READ);
> > +		chip->read_buf(mtd, p, eccsize);
> > +		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
> > +		ecc_stat >>= 4;
> > +
> > +	}
> > +	ecc_stat = host->devtype_data->get_ecc_status(host);
> > +	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
> > +
> > +	for (i = 0; i < chip->ecc.total; i++)
> > +		ecc_code[i] = chip->oob_poi[eccpos[i]];
> > +
> > +	eccsteps = chip->ecc.steps;
> > +	p = buf;
> > +
> > +	stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
> > +	max_bitflips = max_t(unsigned int, max_bitflips, stat);
> > +
> > +	return max_bitflips;
> > +}
> > +
> > +
> >  static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
> >  				 u_char *read_ecc, u_char *calc_ecc)
> >  {
> > @@ -656,7 +711,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
> >  	struct mxc_nand_host *host = nand_chip->priv;
> >  	u32 ecc_stat, err;
> >  	int no_subpages = 1;
> > -	int ret = 0;
> > +	int ret = 0, broken = 0;
> >  	u8 ecc_bit_mask, err_limit = 0x1;
> >  
> >  	ecc_bit_mask = 0xf;
> > @@ -673,15 +728,21 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
> >  	do {
> >  		err = ecc_stat & ecc_bit_mask;
> >  		if (err > err_limit) {
> > -			printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
> > -			return -1;
> > +			broken++;
> >  		} else {
> >  			ret += err;
> >  		}
> >  		ecc_stat >>= 4;
> >  	} while (--no_subpages);
> >  
> > -	pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
> > +	mtd->ecc_stats.corrected += ret;
> > +	if (ret)
> > +		pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
> > +
> > +	mtd->ecc_stats.failed += broken;
> > +	if (broken)
> > +		printk(KERN_WARNING "%d Symbol UnCorrectable RS-ECC Error\n",
> > +			 broken);
> >  
> >  	return ret;
> >  }
> > @@ -1216,6 +1277,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
> >  /* v21: i.MX25, i.MX35 */
> >  static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
> >  	.preset = preset_v2,
> > +	.read_page = mxc_nand_read_page_hwecc_v2_v3,
> >  	.send_cmd = send_cmd_v1_v2,
> >  	.send_addr = send_addr_v1_v2,
> >  	.send_page = send_page_v2,
> > @@ -1242,6 +1304,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
> >  /* v3.2a: i.MX51 */
> >  static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
> >  	.preset = preset_v3,
> > +	.read_page = mxc_nand_read_page_hwecc_v2_v3,
> >  	.send_cmd = send_cmd_v3,
> >  	.send_addr = send_addr_v3,
> >  	.send_page = send_page_v3,
> > @@ -1269,6 +1332,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
> >  /* v3.2b: i.MX53 */
> >  static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
> >  	.preset = preset_v3,
> > +	.read_page = mxc_nand_read_page_hwecc_v2_v3,
> >  	.send_cmd = send_cmd_v3,
> >  	.send_addr = send_addr_v3,
> >  	.send_page = send_page_v3,
> > @@ -1483,6 +1547,7 @@ static int mxcnd_probe(struct platform_device *pdev)
> >  	this->ecc.layout = host->devtype_data->ecclayout_512;
> >  
> >  	if (host->pdata.hw_ecc) {
> > +		this->ecc.read_page = host->devtype_data->read_page;
> >  		this->ecc.calculate = mxc_nand_calculate_ecc;
> >  		this->ecc.hwctl = mxc_nand_enable_hwecc;
> >  		this->ecc.correct = host->devtype_data->correct_data;
> > -- 
> > 2.0.0
> > 
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/