Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758801AbaGOLDM (ORCPT ); Tue, 15 Jul 2014 07:03:12 -0400 Received: from mail-qc0-f181.google.com ([209.85.216.181]:49288 "EHLO mail-qc0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758775AbaGOLDI (ORCPT ); Tue, 15 Jul 2014 07:03:08 -0400 From: Amit Daniel Kachhap To: linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org Cc: Sangbeom Kim , Liam Girdwood , Mark Brown Subject: [PATCH v2 2/3] regulator: s2mpa01: Optimize the regulator description macro Date: Tue, 15 Jul 2014 16:32:52 +0530 Message-Id: <1405422173-15050-2-git-send-email-amit.daniel@samsung.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1405422173-15050-1-git-send-email-amit.daniel@samsung.com> References: <1405422173-15050-1-git-send-email-amit.daniel@samsung.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch makes the regulator description macro take minimum and steps voltage as parameter. In this way many repeated macros can be removed. Now these macros are repeated only if the the LDO/BUCK ctrl registers have non-linear positions. The good thing is these ctrl registers are mostly linear so they are not passed as parameters. This patch reduces the code size and also allow easy addition of more s2mpxxx PMIC drivers which differs a lot in minimum/step voltages. Cc: Sangbeom Kim Cc: Liam Girdwood Cc: Mark Brown Reviewed-by: Krzysztof Kozlowski Signed-off-by: Amit Daniel Kachhap --- Changes since v1: * Removed min parameter from regulator_desc_ldo1 as pointed by Krzysztof * Added Cc to maintainers. * Added Krzysztof reviewed-by. drivers/regulator/s2mpa01.c | 134 ++++++++++++-------------------------------- 1 file changed, 36 insertions(+), 98 deletions(-) diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c index 962c5f1..89fe32c 100644 --- a/drivers/regulator/s2mpa01.c +++ b/drivers/regulator/s2mpa01.c @@ -235,28 +235,14 @@ static struct regulator_ops s2mpa01_buck_ops = { .set_ramp_delay = s2mpa01_set_ramp_delay, }; -#define regulator_desc_ldo1(num) { \ +#define regulator_desc_ldo(num, step) { \ .name = "LDO"#num, \ .id = S2MPA01_LDO##num, \ .ops = &s2mpa01_ldo_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ .min_uV = MIN_800_MV, \ - .uV_step = STEP_50_MV, \ - .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ - .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ - .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ - .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ - .enable_mask = S2MPA01_ENABLE_MASK \ -} -#define regulator_desc_ldo2(num) { \ - .name = "LDO"#num, \ - .id = S2MPA01_LDO##num, \ - .ops = &s2mpa01_ldo_ops, \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - .min_uV = MIN_800_MV, \ - .uV_step = STEP_25_MV, \ + .uV_step = step, \ .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ @@ -296,14 +282,14 @@ static struct regulator_ops s2mpa01_buck_ops = { .enable_mask = S2MPA01_ENABLE_MASK \ } -#define regulator_desc_buck6_7(num) { \ +#define regulator_desc_buck6_10(num, min, step) { \ .name = "BUCK"#num, \ .id = S2MPA01_BUCK##num, \ .ops = &s2mpa01_buck_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ - .min_uV = MIN_600_MV, \ - .uV_step = STEP_6_25_MV, \ + .min_uV = min, \ + .uV_step = step, \ .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ .ramp_delay = S2MPA01_RAMP_DELAY, \ .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \ @@ -312,91 +298,43 @@ static struct regulator_ops s2mpa01_buck_ops = { .enable_mask = S2MPA01_ENABLE_MASK \ } -#define regulator_desc_buck8 { \ - .name = "BUCK8", \ - .id = S2MPA01_BUCK8, \ - .ops = &s2mpa01_buck_ops, \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - .min_uV = MIN_800_MV, \ - .uV_step = STEP_12_5_MV, \ - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ - .ramp_delay = S2MPA01_RAMP_DELAY, \ - .vsel_reg = S2MPA01_REG_B8CTRL2, \ - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ - .enable_reg = S2MPA01_REG_B8CTRL1, \ - .enable_mask = S2MPA01_ENABLE_MASK \ -} - -#define regulator_desc_buck9 { \ - .name = "BUCK9", \ - .id = S2MPA01_BUCK9, \ - .ops = &s2mpa01_buck_ops, \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - .min_uV = MIN_1500_MV, \ - .uV_step = STEP_12_5_MV, \ - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ - .ramp_delay = S2MPA01_RAMP_DELAY, \ - .vsel_reg = S2MPA01_REG_B9CTRL2, \ - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ - .enable_reg = S2MPA01_REG_B9CTRL1, \ - .enable_mask = S2MPA01_ENABLE_MASK \ -} - -#define regulator_desc_buck10 { \ - .name = "BUCK10", \ - .id = S2MPA01_BUCK10, \ - .ops = &s2mpa01_buck_ops, \ - .type = REGULATOR_VOLTAGE, \ - .owner = THIS_MODULE, \ - .min_uV = MIN_1000_MV, \ - .uV_step = STEP_12_5_MV, \ - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ - .ramp_delay = S2MPA01_RAMP_DELAY, \ - .vsel_reg = S2MPA01_REG_B10CTRL2, \ - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ - .enable_reg = S2MPA01_REG_B10CTRL1, \ - .enable_mask = S2MPA01_ENABLE_MASK \ -} - static struct regulator_desc regulators[] = { - regulator_desc_ldo2(1), - regulator_desc_ldo1(2), - regulator_desc_ldo1(3), - regulator_desc_ldo1(4), - regulator_desc_ldo1(5), - regulator_desc_ldo2(6), - regulator_desc_ldo1(7), - regulator_desc_ldo1(8), - regulator_desc_ldo1(9), - regulator_desc_ldo1(10), - regulator_desc_ldo2(11), - regulator_desc_ldo1(12), - regulator_desc_ldo1(13), - regulator_desc_ldo1(14), - regulator_desc_ldo1(15), - regulator_desc_ldo1(16), - regulator_desc_ldo1(17), - regulator_desc_ldo1(18), - regulator_desc_ldo1(19), - regulator_desc_ldo1(20), - regulator_desc_ldo1(21), - regulator_desc_ldo2(22), - regulator_desc_ldo2(23), - regulator_desc_ldo1(24), - regulator_desc_ldo1(25), - regulator_desc_ldo1(26), + regulator_desc_ldo(1, STEP_25_MV), + regulator_desc_ldo(2, STEP_50_MV), + regulator_desc_ldo(3, STEP_50_MV), + regulator_desc_ldo(4, STEP_50_MV), + regulator_desc_ldo(5, STEP_50_MV), + regulator_desc_ldo(6, STEP_25_MV), + regulator_desc_ldo(7, STEP_50_MV), + regulator_desc_ldo(8, STEP_50_MV), + regulator_desc_ldo(9, STEP_50_MV), + regulator_desc_ldo(10, STEP_50_MV), + regulator_desc_ldo(11, STEP_25_MV), + regulator_desc_ldo(12, STEP_50_MV), + regulator_desc_ldo(13, STEP_50_MV), + regulator_desc_ldo(14, STEP_50_MV), + regulator_desc_ldo(15, STEP_50_MV), + regulator_desc_ldo(16, STEP_50_MV), + regulator_desc_ldo(17, STEP_50_MV), + regulator_desc_ldo(18, STEP_50_MV), + regulator_desc_ldo(19, STEP_50_MV), + regulator_desc_ldo(20, STEP_50_MV), + regulator_desc_ldo(21, STEP_50_MV), + regulator_desc_ldo(22, STEP_25_MV), + regulator_desc_ldo(23, STEP_25_MV), + regulator_desc_ldo(24, STEP_50_MV), + regulator_desc_ldo(25, STEP_50_MV), + regulator_desc_ldo(26, STEP_50_MV), regulator_desc_buck1_4(1), regulator_desc_buck1_4(2), regulator_desc_buck1_4(3), regulator_desc_buck1_4(4), regulator_desc_buck5, - regulator_desc_buck6_7(6), - regulator_desc_buck6_7(7), - regulator_desc_buck8, - regulator_desc_buck9, - regulator_desc_buck10, + regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV), + regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV), + regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV), + regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV), + regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV), }; static int s2mpa01_pmic_probe(struct platform_device *pdev) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/