Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755084AbaGOPXM (ORCPT ); Tue, 15 Jul 2014 11:23:12 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:51732 "EHLO mx08-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754733AbaGOPW6 (ORCPT ); Tue, 15 Jul 2014 11:22:58 -0400 From: Gabriel FERNANDEZ To: mturquette@linaro.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kernel@stlinux.com, Lee Jones , Gabriel Fernandez Subject: [PATCH v3 01/15] clk: st: Update ST clock binding documentation Date: Tue, 15 Jul 2014 17:20:17 +0200 Message-Id: <1405437631-23623-2-git-send-email-gabriel.fernandez@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1405437631-23623-1-git-send-email-gabriel.fernandez@linaro.org> References: <1405437631-23623-1-git-send-email-gabriel.fernandez@linaro.org> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.12.52,1.0.14,0.0.0000 definitions=2014-07-15_05:2014-07-15,2014-07-15,1970-01-01 signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Naming convention was changed in dts file but the clock binding documentation hasn't been updated. Signed-off-by: Gabriel Fernandez Acked-by: Peter Griffin --- .../bindings/clock/st/st,clkgen-divmux.txt | 28 +++++------ .../devicetree/bindings/clock/st/st,clkgen-mux.txt | 6 +-- .../devicetree/bindings/clock/st/st,clkgen-pll.txt | 17 ++++--- .../bindings/clock/st/st,clkgen-prediv.txt | 8 ++-- .../devicetree/bindings/clock/st/st,clkgen-vcc.txt | 34 ++++++++------ .../devicetree/bindings/clock/st/st,clkgen.txt | 54 +++++++++++++--------- .../devicetree/bindings/clock/st/st,quadfs.txt | 15 +++--- 7 files changed, 94 insertions(+), 68 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt index ae56315..6247652 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt @@ -24,26 +24,26 @@ Required properties: Example: - clockgenA@fd345000 { + clockgen-a@fd345000 { reg = <0xfd345000 0xb50>; - CLK_M_A1_DIV1: CLK_M_A1_DIV1 { + clk_m_a1_div1: clk-m-a1-div1 { #clock-cells = <1>; compatible = "st,clkgena-divmux-c32-odf1", "st,clkgena-divmux"; - clocks = <&CLK_M_A1_OSC_PREDIV>, - <&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */ - <&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */ - - clock-output-names = "CLK_M_RX_ICN_TS", - "CLK_M_RX_ICN_VDP_0", - "", /* Unused */ - "CLK_M_PRV_T1_BUS", - "CLK_M_ICN_REG_12", - "CLK_M_ICN_REG_10", - "", /* Unused */ - "CLK_M_ICN_ST231"; + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-rx-icn-ts", + "clk-m-rx-icn-vdp-0", + "", /* unused */ + "clk-m-prv-t1-bus", + "clk-m-icn-reg-12", + "clk-m-icn-reg-10", + "", /* unused */ + "clk-m-icn-st231"; }; }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt index 943e080..f1fa91c 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt @@ -17,7 +17,7 @@ Required properties: "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux" "st,stih415-clkgen-a9-mux", "st,clkgen-mux" "st,stih416-clkgen-a9-mux", "st,clkgen-mux" - + "st,stih407-clkgen-a9-mux", "st,clkgen-mux" - #clock-cells : from common clock binding; shall be set to 0. @@ -27,10 +27,10 @@ Required properties: Example: - CLK_M_HVA: CLK_M_HVA { + clk_m_hva: clk-m-hva@fd690868 { #clock-cells = <0>; compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"; reg = <0xfd690868 4>; - clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>; + clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>; }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt index 81eb385..efb51cf 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt @@ -19,11 +19,14 @@ Required properties: "st,stih415-plls-c32-ddr", "st,clkgen-plls-c32" "st,stih416-plls-c32-a9", "st,clkgen-plls-c32" "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32" + "st,stih407-plls-c32-a0", "st,clkgen-plls-c32" + "st,stih407-plls-c32-a9", "st,clkgen-plls-c32" + "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32" + "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32" "st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32" "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32" - - #clock-cells : From common clock binding; shall be set to 1. - clocks : From common clock binding @@ -32,17 +35,17 @@ Required properties: Example: - clockgenA@fee62000 { + clockgen-a@fee62000 { reg = <0xfee62000 0xb48>; - CLK_S_A0_PLL: CLK_S_A0_PLL { + clk_s_a0_pll: clk-s-a0-pll { #clock-cells = <1>; compatible = "st,clkgena-plls-c65"; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; - clock-output-names = "CLK_S_A0_PLL0_HS", - "CLK_S_A0_PLL0_LS", - "CLK_S_A0_PLL1"; + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; }; }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt index 566c9d7..604766c 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt @@ -20,17 +20,17 @@ Required properties: Example: - clockgenA@fd345000 { + clockgen-a@fd345000 { reg = <0xfd345000 0xb50>; - CLK_M_A2_OSC_PREDIV: CLK_M_A2_OSC_PREDIV { + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { #clock-cells = <0>; compatible = "st,clkgena-prediv-c32", "st,clkgena-prediv"; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; - clock-output-names = "CLK_M_A2_OSC_PREDIV"; + clock-output-names = "clk-m-a2-osc-prediv"; }; }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt index 4e3ff28..109b3ed 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt @@ -32,22 +32,30 @@ Required properties: Example: - CLOCKGEN_C_VCC: CLOCKGEN_C_VCC { + clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac { #clock-cells = <1>; compatible = "st,stih416-clkgenc", "st,clkgen-vcc"; reg = <0xfe8308ac 12>; - clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>, - <&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>; - - clock-output-names = - "CLK_S_PIX_HDMI", "CLK_S_PIX_DVO", - "CLK_S_OUT_DVO", "CLK_S_PIX_HD", - "CLK_S_HDDAC", "CLK_S_DENC", - "CLK_S_SDDAC", "CLK_S_PIX_MAIN", - "CLK_S_PIX_AUX", "CLK_S_STFE_FRC_0", - "CLK_S_REF_MCRU", "CLK_S_SLAVE_MCRU", - "CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL", - "CLK_S_THSENS"; + clocks = <&clk_s_vcc_hd>, + <&clockgen_c 1>, + <&clk_s_tmds_fromphy>, + <&clockgen_c 2>; + + clock-output-names = "clk-s-pix-hdmi", + "clk-s-pix-dvo", + "clk-s-out-dvo", + "clk-s-pix-hd", + "clk-s-hddac", + "clk-s-denc", + "clk-s-sddac", + "clk-s-pix-main", + "clk-s-pix-aux", + "clk-s-stfe-frc-0", + "clk-s-ref-mcru", + "clk-s-slave-mcru", + "clk-s-tmds-hdmi", + "clk-s-hdmi-reject-pll", + "clk-s-thsens"; }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index 49ec5ae..427bad8 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -24,60 +24,72 @@ address is common of all subnode. quadfs_node { ... }; + + mux_node { + ... + }; + + vcc_node { + ... + }; ... }; This binding uses the common clock binding[1]. -Each subnode should use the binding discribe in [2]..[4] +Each subnode should use the binding discribe in [2]..[7] [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/st,quadfs.txt -[3] Documentation/devicetree/bindings/clock/st,quadfs.txt -[4] Documentation/devicetree/bindings/clock/st,quadfs.txt +[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt +[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt +[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt +[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt +[6] Documentation/devicetree/bindings/clock/st,vcc.txt +[7] Documentation/devicetree/bindings/clock/st,quadfs.txt + Required properties: - reg : A Base address and length of the register set. Example: - clockgenA@fee62000 { + clockgen-a@fee62000 { reg = <0xfee62000 0xb48>; - CLK_S_A0_PLL: CLK_S_A0_PLL { + clk_s_a0_pll: clk-s-a0-pll { #clock-cells = <1>; compatible = "st,clkgena-plls-c65"; - clocks = <&CLK_SYSIN>; + clocks = <&clk-sysin>; - clock-output-names = "CLK_S_A0_PLL0_HS", - "CLK_S_A0_PLL0_LS", - "CLK_S_A0_PLL1"; + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; }; - CLK_S_A0_OSC_PREDIV: CLK_S_A0_OSC_PREDIV { + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { #clock-cells = <0>; compatible = "st,clkgena-prediv-c65", "st,clkgena-prediv"; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; - clock-output-names = "CLK_S_A0_OSC_PREDIV"; + clock-output-names = "clk-s-a0-osc-prediv"; }; - CLK_S_A0_HS: CLK_S_A0_HS { + clk_s_a0_hs: clk-s-a0-hs { #clock-cells = <1>; compatible = "st,clkgena-divmux-c65-hs", "st,clkgena-divmux"; - clocks = <&CLK_S_A0_OSC_PREDIV>, - <&CLK_S_A0_PLL 0>, /* PLL0 HS */ - <&CLK_S_A0_PLL 2>; /* PLL1 */ + clocks = <&clk-s_a0_osc_prediv>, + <&clk-s_a0_pll 0>, /* pll0 hs */ + <&clk-s_a0_pll 2>; /* pll1 */ - clock-output-names = "CLK_S_FDMA_0", - "CLK_S_FDMA_1", - ""; /* CLK_S_JIT_SENSE */ - /* Fourth output unused */ + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* fourth output unused */ }; }; diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt index ec86d62..cedeb9c 100644 --- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt +++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt @@ -15,6 +15,9 @@ Required properties: "st,stih416-quadfs432", "st,quadfs" "st,stih416-quadfs660-E", "st,quadfs" "st,stih416-quadfs660-F", "st,quadfs" + "st,stih407-quadfs660-C", "st,quadfs" + "st,stih407-quadfs660-D", "st,quadfs" + - #clock-cells : from common clock binding; shall be set to 1. @@ -32,14 +35,14 @@ Required properties: Example: - CLOCKGEN_E: CLOCKGEN_E { + clockgen_e: clockgen-e@fd3208bc { #clock-cells = <1>; compatible = "st,stih416-quadfs660-E", "st,quadfs"; reg = <0xfd3208bc 0xB0>; - clocks = <&CLK_SYSIN>; - clock-output-names = "CLK_M_PIX_MDTP_0", - "CLK_M_PIX_MDTP_1", - "CLK_M_PIX_MDTP_2", - "CLK_M_MPELPC"; + clocks = <&clk_sysin>; + clock-output-names = "clk-m-pix-mdtp-0", + "clk-m-pix-mdtp-1", + "clk-m-pix-mdtp-2", + "clk-m-mpelpc"; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/