Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753626AbaGOQ3Y (ORCPT ); Tue, 15 Jul 2014 12:29:24 -0400 Received: from smtp.codeaurora.org ([198.145.11.231]:45656 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751279AbaGOQ3S (ORCPT ); Tue, 15 Jul 2014 12:29:18 -0400 From: Kumar Gala To: Kishon Vijay Abraham I , Tejun Heo , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell Cc: Kumar Gala , linux-ide@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 2/2] phy: qcom: Add device tree bindings for IPQ806x SATA PHY Date: Tue, 15 Jul 2014 11:29:13 -0500 Message-Id: <1405441753-18511-2-git-send-email-galak@codeaurora.org> X-Mailer: git-send-email 1.8.2.1 In-Reply-To: <1405441753-18511-1-git-send-email-galak@codeaurora.org> References: <1405441753-18511-1-git-send-email-galak@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add binding spec for Qualcomm SoC PHYs, starting with the SATA PHY on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala --- v6: * Moved binding to qcom-ipq806x-sata-phy.txt instead of qcom-phy.txt .../bindings/phy/qcom-ipq806x-sata-phy.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt diff --git a/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt new file mode 100644 index 0000000..76bfbd0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt @@ -0,0 +1,23 @@ +Qualcomm IPQ806x SATA PHY Controller +------------------------------------ + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible: compatible list, contains "qcom,ipq806x-sata-phy" +- reg: offset and length of the SATA PHY register set; +- #phy-cells: must be zero +- clocks: must be exactly one entry +- clock-names: must be "cfg" + +Example: + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/