Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965200AbaGPOqW (ORCPT ); Wed, 16 Jul 2014 10:46:22 -0400 Received: from www.linutronix.de ([62.245.132.108]:56999 "EHLO Galois.linutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934116AbaGPOpQ (ORCPT ); Wed, 16 Jul 2014 10:45:16 -0400 From: Sebastian Andrzej Siewior To: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Tony Lindgren , Felipe Balbi , linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, Greg Kroah-Hartman , Sebastian Andrzej Siewior Subject: [PATCH 3/5] tty: serial: 8250 core: allow to set ->throttle / ->unthrottle callbacks Date: Wed, 16 Jul 2014 16:45:01 +0200 Message-Id: <1405521903-5877-4-git-send-email-bigeasy@linutronix.de> X-Mailer: git-send-email 2.0.1 In-Reply-To: <1405521903-5877-1-git-send-email-bigeasy@linutronix.de> References: <1405521903-5877-1-git-send-email-bigeasy@linutronix.de> X-Linutronix-Spam-Score: -1.0 X-Linutronix-Spam-Level: - X-Linutronix-Spam-Status: No , -1.0 points, 5.0 required, ALL_TRUSTED=-1,SHORTCIRCUIT=-0.0001 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The omap uart provides support for HW assisted flow control. What is missing is the support to throttle / unthrottle callbacks which are used by the omap-serial driver at the moment. This patch adds the callbacks. It should be safe to add them since they are only invovked from the serial_core (uart_throttle()) if the feature flags are set. Signed-off-by: Sebastian Andrzej Siewior --- drivers/tty/serial/8250/8250_core.c | 14 ++++++++++++++ include/linux/serial_core.h | 2 ++ 2 files changed, 16 insertions(+) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index bd0e1897..714f954 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1320,6 +1320,16 @@ static void serial8250_start_tx(struct uart_port *port) } } +static void serial8250_throttle(struct uart_port *port) +{ + port->throttle(port); +} + +static void serial8250_unthrottle(struct uart_port *port) +{ + port->unthrottle(port); +} + static void serial8250_stop_rx(struct uart_port *port) { struct uart_8250_port *up = @@ -2752,6 +2762,8 @@ static struct uart_ops serial8250_pops = { .get_mctrl = serial8250_get_mctrl, .stop_tx = serial8250_stop_tx, .start_tx = serial8250_start_tx, + .throttle = serial8250_throttle, + .unthrottle = serial8250_unthrottle, .stop_rx = serial8250_stop_rx, .enable_ms = serial8250_enable_ms, .break_ctl = serial8250_break_ctl, @@ -3300,6 +3312,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->port.fifosize = up->port.fifosize; uart->tx_loadsz = up->tx_loadsz; uart->capabilities = up->capabilities; + uart->port.throttle = up->port.throttle; + uart->port.unthrottle = up->port.unthrottle; /* Take tx_loadsz from fifosize if it wasn't set separately */ if (uart->port.fifosize && !uart->tx_loadsz) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 6f20ff0..c380af2 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -124,6 +124,8 @@ struct uart_port { struct ktermios *old); int (*startup)(struct uart_port *port); void (*shutdown)(struct uart_port *port); + void (*throttle)(struct uart_port *port); + void (*unthrottle)(struct uart_port *port); int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int old); -- 2.0.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/