Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934548AbaGRK1S (ORCPT ); Fri, 18 Jul 2014 06:27:18 -0400 Received: from mx1.redhat.com ([209.132.183.28]:3577 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934222AbaGRK1O (ORCPT ); Fri, 18 Jul 2014 06:27:14 -0400 Message-ID: <53C8F665.3070006@redhat.com> Date: Fri, 18 Jul 2014 12:26:45 +0200 From: Hans de Goede User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: Mikko Perttunen , swarren@wwwdotorg.org, thierry.reding@gmail.com, tj@kernel.org CC: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-tegra@vger.kernel.org, linux-ide@vger.kernel.org Subject: Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding References: <1405500863-19696-2-git-send-email-mperttunen@nvidia.com> <1405667500-7402-1-git-send-email-mperttunen@nvidia.com> In-Reply-To: <1405667500-7402-1-git-send-email-mperttunen@nvidia.com> X-Enigmail-Version: 1.6 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, On 07/18/2014 09:11 AM, Mikko Perttunen wrote: > This patch adds device tree binding documentation for the SATA > controller found on NVIDIA Tegra SoCs. > > Signed-off-by: Mikko Perttunen > --- > v5: remove ordering requirement again Acked-by: Hans de Goede Regards, Hans > > .../devicetree/bindings/ata/tegra-sata.txt | 30 ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt > > diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt > new file mode 100644 > index 0000000..946f207 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ata/tegra-sata.txt > @@ -0,0 +1,30 @@ > +Tegra124 SoC SATA AHCI controller > + > +Required properties : > +- compatible : "nvidia,tegra124-ahci". > +- reg : Should contain 2 entries: > + - AHCI register set (SATA BAR5) > + - SATA register set > +- interrupts : Defines the interrupt used by SATA > +- clocks : Must contain an entry for each entry in clock-names. > + See ../clocks/clock-bindings.txt for details. > +- clock-names : Must include the following entries: > + - sata > + - sata-oob > + - cml1 > + - pll_e > +- resets : Must contain an entry for each entry in reset-names. > + See ../reset/reset.txt for details. > +- reset-names : Must include the following entries: > + - sata > + - sata-oob > + - sata-cold > +- phys : Must contain an entry for each entry in phy-names. > + See ../phy/phy-bindings.txt for details. > +- phy-names : Must include the following entries: > + - sata-phy : XUSB PADCTL SATA PHY > +- hvdd-supply : Defines the SATA HVDD regulator > +- vddio-supply : Defines the SATA VDDIO regulator > +- avdd-supply : Defines the SATA AVDD regulator > +- target-5v-supply : Defines the SATA 5V power regulator > +- target-12v-supply : Defines the SATA 12V power regulator > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/