Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932098AbaGTGjw (ORCPT ); Sun, 20 Jul 2014 02:39:52 -0400 Received: from mail-pd0-f172.google.com ([209.85.192.172]:60622 "EHLO mail-pd0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751525AbaGTGju (ORCPT ); Sun, 20 Jul 2014 02:39:50 -0400 Date: Sun, 20 Jul 2014 14:38:41 +0800 From: Wang YanQing To: gregkh@linuxfoundation.org Cc: linus.walleij@linaro.org, jhovold@gmail.com, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2] usb:serial:pl2303: add GPIOs interface on PL2303 Message-ID: <20140720063841.GA28059@udknight> Mail-Followup-To: Wang YanQing , gregkh@linuxfoundation.org, linus.walleij@linaro.org, jhovold@gmail.com, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org PL2303HX has two GPIOs, this patch add interface for it. Signed-off-by: Wang YanQing --- Changes v1-v2: 1:drop gpio-pl2303.c and relation stuff 2:hang gpio stuff off of pl2303.c drivers/usb/serial/Kconfig | 7 ++ drivers/usb/serial/pl2303.c | 153 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 160 insertions(+) diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 3ce5c74..099ff05 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -516,6 +516,13 @@ config USB_SERIAL_PL2303 To compile this driver as a module, choose M here: the module will be called pl2303. +config USB_SERIAL_PL2303_GPIO + bool "USB Prolific 2303 Single Port GPIOs support" + depends on USB_SERIAL_PL2303 + help + Say Y here if you want to use the GPIOs on PL2303 USB Serial single port + adapter from Prolific. + config USB_SERIAL_OTI6858 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" help diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index b3d5a35..1fbd338 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -28,6 +28,9 @@ #include #include #include +#ifdef CONFIG_USB_SERIAL_PL2303_GPIO +#include +#endif #include "pl2303.h" @@ -143,9 +146,27 @@ struct pl2303_type_data { unsigned long quirks; }; +#ifdef CONFIG_USB_SERIAL_PL2303_GPIO +struct pl2303_gpio { + /* + * 0..3: unknown (zero) + * 4: gp0 output enable (1: gp0 pin is output, 0: gp0 pin is input) + * 5: gp1 output enable (1: gp1 pin is output, 0: gp1 pin is input) + * 6: gp0 pin value + * 7: gp1 pin value + */ + u8 index; + struct usb_serial *serial; + struct gpio_chip gpio_chip; +}; +#endif + struct pl2303_serial_private { const struct pl2303_type_data *type; unsigned long quirks; +#ifdef CONFIG_USB_SERIAL_PL2303_GPIO + struct pl2303_gpio *gpio; +#endif }; struct pl2303_private { @@ -213,6 +234,100 @@ static int pl2303_probe(struct usb_serial *serial, return 0; } +#ifdef CONFIG_USB_SERIAL_PL2303_GPIO +static inline struct pl2303_gpio *to_pl2303_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct pl2303_gpio, gpio_chip); +} + +static int pl2303_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct pl2303_gpio *gpio = to_pl2303_gpio(chip); + + if (offset == 0) + gpio->index &= ~0x10; + else if (offset == 1) + gpio->index &= ~0x20; + else + return -EINVAL; + + pl2303_vendor_write(gpio->serial, 1, gpio->index); + return 0; +} + +static int pl2303_gpio_direction_out(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pl2303_gpio *gpio = to_pl2303_gpio(chip); + + if (offset == 0) { + gpio->index |= 0x10; + if (value) + gpio->index |= 0x40; + else + gpio->index &= ~0x40; + } else if (offset == 1) { + gpio->index |= 0x20; + if (value) + gpio->index |= 0x80; + else + gpio->index &= ~0x80; + } else { + return -EINVAL; + } + + pl2303_vendor_write(gpio->serial, 1, gpio->index); + return 0; +} + +static void pl2303_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pl2303_gpio *gpio = to_pl2303_gpio(chip); + + if (offset == 0) { + if (value) + gpio->index |= 0x40; + else + gpio->index &= ~0x40; + } else if (offset == 1) { + if (value) + gpio->index |= 0x80; + else + gpio->index &= ~0x80; + } else { + return; + } + + pl2303_vendor_write(gpio->serial, 1, gpio->index); +} + +static int pl2303_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct pl2303_gpio *gpio = to_pl2303_gpio(chip); + unsigned char buf[1]; + int value = 0; + + if(pl2303_vendor_read(gpio->serial, 0x0081, buf) < 1) + return -EIO; + if (offset == 0) + value = buf[0] & 0x40; + else if (offset == 1) + value = buf[0] & 0x80; + else + value = -EINVAL; + return value; +} + +static struct gpio_chip template_chip = { + .label = "pl2303-gpio", + .owner = THIS_MODULE, + .direction_input = pl2303_gpio_direction_in, + .get = pl2303_gpio_get, + .direction_output = pl2303_gpio_direction_out, + .set = pl2303_gpio_set, + .can_sleep = 1, +}; +#endif + static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; @@ -262,6 +377,37 @@ static int pl2303_startup(struct usb_serial *serial) kfree(buf); +#ifdef CONFIG_USB_SERIAL_PL2303_GPIO + if (type == TYPE_HX) + { + struct pl2303_gpio *gpio; + + gpio = kzalloc(sizeof(struct pl2303_gpio), GFP_KERNEL); + if (gpio == NULL) { + dev_err(&serial->interface->dev, "Failed to allocate pl2303_gpio\n"); + } else { + int ret; + + gpio->index = 0x00; + gpio->serial = serial; + gpio->gpio_chip = template_chip; + gpio->gpio_chip.ngpio = 2; + gpio->gpio_chip.base = -1; + gpio->gpio_chip.dev = &serial->interface->dev; + /* initialize GPIOs, input mode as default */ + pl2303_vendor_write(gpio->serial, 1, gpio->index); + + spriv->gpio = gpio; + ret = gpiochip_add(&spriv->gpio->gpio_chip); + if (ret < 0) { + dev_err(&serial->interface->dev, + "Could not register gpiochip, %d\n", ret); + kfree(spriv->gpio); + spriv->gpio = NULL; + } + } + } +#endif return 0; } @@ -269,6 +415,13 @@ static void pl2303_release(struct usb_serial *serial) { struct pl2303_serial_private *spriv = usb_get_serial_data(serial); +#ifdef CONFIG_USB_SERIAL_PL2303_GPIO + if (spriv && spriv->gpio) { + if (gpiochip_remove(&spriv->gpio->gpio_chip)) + dev_err(&serial->interface->dev, "unable to remove gpio_chip?\n"); + kfree(spriv->gpio); + } +#endif kfree(spriv); } -- 1.8.5.5.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/