Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759432AbaGXPWr (ORCPT ); Thu, 24 Jul 2014 11:22:47 -0400 Received: from mga09.intel.com ([134.134.136.24]:42594 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759076AbaGXPWp (ORCPT ); Thu, 24 Jul 2014 11:22:45 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.01,724,1400050800"; d="scan'208";a="548469361" Message-ID: <53D124B3.7030807@linux.intel.com> Date: Thu, 24 Jul 2014 23:22:27 +0800 From: "Fu, Zhonghui" User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: Arend van Spriel , brudley@broadcom.com, Franky Lin , meuleman@broadcom.com, linville@tuxdriver.com, pieterpg@broadcom.com, dekim@broadcom.com, mcgrof@do-not-panic.com, antonio@open-mesh.com, johannes.berg@intel.com CC: linux-wireless@vger.kernel.org, brcm80211-dev-list@broadcom.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, Russell King Subject: Re: [PATCH] brcmfmac: prevent watchdog from interfering with scanning and connecting References: <539E8559.3010601@linux.intel.com> <539EA79C.7010206@broadcom.com> <53A30F96.3010206@linux.intel.com> <53A311E4.301@broadcom.com> <53CCC44C.2070507@linux.intel.com> In-Reply-To: <53CCC44C.2070507@linux.intel.com> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 2014/7/21 15:42, Fu, Zhonghui wrote: > On 2014/6/20 0:37, Arend van Spriel wrote: >> On 19-06-14 18:28, Fu, Zhonghui wrote: >>> On 2014/6/16 16:15, Arend van Spriel wrote: >>>> On 16-06-14 07:49, Fu, Zhonghui wrote: >>>>> From 14485894add32aedacb3e486ebb2cc2b73861abf Mon Sep 17 00:00:00 2001 >>>>> From: Fu zhonghui >>>>> Date: Wed, 11 Jun 2014 11:06:55 +0800 >>>>> Subject: [PATCH] brcmfmac: prevent watchdog from interfering with scanning and connecting >>>>> >>>>> Watchdog in brcmfmac driver may make WiFi chip enter sleep mode >>>>> before completion of scanning or connecting. >>>>> >>>>> This will lead to scanning or connecting failure. >>>>> >>>>> Increasing temporarily idle-time threshold during scanning or >>>>> connecting can ensure scanning or connecting success without >>>>> watchdog interference. >>>> Are you sure you are not having runtime PM enabled. That could be your problem as the host controller code disables sdio irqs. Please see this thread [1]. For our device runtime pm should not be enabled, but I am not sure if that is taken into account in mmc_attach_sdio() (see code below). >>> I have tried brcmfmac driver with "CONFIG_PM_RUNTIME is not set", and scanning and connecting always succeeded. This means that CONFIG_PM_RUNTIME should not be set if we use SDIO WiFi device driven by brcmfmac driver, right? >> Depends which kernel you are using. In 3.16-rc1 the sdio interrupt issue has been fixed so you should be fine to use CONFIG_PM_RUNTIME. Here is the commit Any clues or comments to the following issue? > I run 3.16-rc4 and 3.16-rc5 kernel with CONFIG_PM_RUNTIME set, the issue still exists as follows: > > 1 step: modprobe brcmfmac > 2 step: iwlist wlan1 scan get scanning result successfully. > 3 step: wait a while, no any operation > 4 step: iwlist wlan1 scan scanning timeout, can't get scanning result. > > > Thanks, > Zhonghui > >> commit be138554a7923658ded799b0e8794d9c1d08a6e5 >> Author: Russell King >> Date: Fri Apr 25 12:55:56 2014 +0100 >> >> mmc: sdhci: allow sdio interrupts while sdhci runtime suspended >> >> Regards, >> Arend >> >>> Thanks, >>> Zhonghui >>>> Gr. AvS >>>> >>>> [1] http://www.spinics.net/lists/linux-mmc/msg25978.html >>>> >>>> --8<---------------------------------------------------------------- >>>> >>>> /* >>>> * Enable runtime PM only if supported by host+card+board >>>> */ >>>> if (host->caps & MMC_CAP_POWER_OFF_CARD) { >>>> /* >>>> * Let runtime PM core know our card is active >>>> */ >>>> err = pm_runtime_set_active(&card->dev); >>>> if (err) >>>> goto remove; >>>> >>>> /* >>>> * Enable runtime PM for this card >>>> */ >>>> pm_runtime_enable(&card->dev); >>>> } >>>> >>>>> Signed-off-by: Fu zhonghui >>>>> --- >>>>> drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 18 ++++++++++++++++-- >>>>> .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 3 ++- >>>>> 2 files changed, 18 insertions(+), 3 deletions(-) >>>>> >>>>> diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c >>>>> index 13c89a0..729deab 100644 >>>>> --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c >>>>> +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c >>>>> @@ -34,6 +34,7 @@ >>>>> #include >>>>> #include >>>>> #include >>>>> +#include >>>>> #include >>>>> #include >>>>> #include >>>>> @@ -43,6 +44,10 @@ >>>>> #include "sdio_host.h" >>>>> #include "chip.h" >>>>> #include "nvram.h" >>>>> +#include "dhd.h" >>>>> +#include "fwil_types.h" >>>>> +#include "p2p.h" >>>>> +#include "wl_cfg80211.h" >>>>> >>>>> #define DCMD_RESP_TIMEOUT 2000 /* In milli second */ >>>>> >>>>> @@ -307,6 +312,7 @@ struct rte_console { >>>>> * when idle >>>>> */ >>>>> #define BRCMF_IDLE_INTERVAL 1 >>>>> +#define BRCMF_IDLE_INTERVAL_SCANNING_CONNECTING 100 >>>>> >>>>> #define KSO_WAIT_US 50 >>>>> #define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US) >>>>> @@ -3613,9 +3619,9 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus) >>>>> >>>>> static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) >>>>> { >>>>> -#ifdef DEBUG >>>>> struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev); >>>>> -#endif /* DEBUG */ >>>>> + struct brcmf_cfg80211_info *cfg = bus_if->drvr->config; >>>>> + struct brcmf_if *ifp = cfg->pub->iflist[0]; >>>>> >>>>> brcmf_dbg(TIMER, "Enter\n"); >>>>> >>>>> @@ -3678,6 +3684,14 @@ static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) >>>>> >>>>> /* On idle timeout clear activity flag and/or turn off clock */ >>>>> if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) { >>>>> + >>>>> + if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status) || >>>>> + test_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state)) { >>>>> + bus->idletime = BRCMF_IDLE_INTERVAL_SCANNING_CONNECTING; >>>>> + } else { >>>>> + bus->idletime = BRCMF_IDLE_INTERVAL; >>>>> + } >>>>> + >>>>> if (++bus->idlecount >= bus->idletime) { >>>>> bus->idlecount = 0; >>>>> if (bus->activity) { >>>>> diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c >>>>> index be19852..e76517e 100644 >>>>> --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c >>>>> +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c >>>>> @@ -913,6 +913,8 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif, >>>>> return -EAGAIN; >>>>> } >>>>> >>>>> + set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); >>>>> + >>>>> /* If scan req comes for p2p0, send it over primary I/F */ >>>>> if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) >>>>> vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; >>>>> @@ -933,7 +935,6 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif, >>>>> } >>>>> >>>>> cfg->scan_request = request; >>>>> - set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); >>>>> if (escan_req) { >>>>> cfg->escan_info.run = brcmf_run_escan; >>>>> err = brcmf_p2p_scan_prep(wiphy, request, vif); >>>>> -- 1.7.1 >>>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>> Please read the FAQ at http://www.tux.org/lkml/ >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/