Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751634AbaG0CA1 (ORCPT ); Sat, 26 Jul 2014 22:00:27 -0400 Received: from vps0.lunn.ch ([178.209.37.122]:53828 "EHLO vps0.lunn.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751219AbaG0CAY (ORCPT ); Sat, 26 Jul 2014 22:00:24 -0400 Date: Sun, 27 Jul 2014 03:55:09 +0200 From: Andrew Lunn To: Benoit Masson Cc: benoitm@perenite.com, Rob Herring , Pawel Moll , Ian Campbell , Kumar Gala , Russell King , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, jason@lakedaemon.net, andrew@lunn.ch, gregory.clement@free-electrons.com, sebastian.hesselbarth@googlemail.com Subject: Re: [PATCH 2/2] V3 ARM: mvebu: Added dts defintion for Lenovo Iomega ix4-300d NAS Message-ID: <20140727015509.GB31974@lunn.ch> References: <1406418490-61502-1-git-send-email-yahoo@perenite.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1406418490-61502-1-git-send-email-yahoo@perenite.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sat, Jul 26, 2014 at 04:48:10PM -0700, Benoit Masson wrote: > The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb, > USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU. > > http://shop.lenovo.com/us/en/servers/network-storage/lenovoemc/ix4-300d/ > Signed-off-by: Benoit Masson > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 285 ++++++++++++++++++++++++ > 2 files changed, 287 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index adb5ed9..4429495 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -437,8 +437,9 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ > armada-xp-axpwifiap.dtb \ > armada-xp-db.dtb \ > armada-xp-gp.dtb \ > - armada-xp-netgear-rn2120.dtb \ > + armada-xp-lenovo-ix4-300d.dtb \ > armada-xp-matrix.dtb \ > + armada-xp-netgear-rn2120.dtb \ > armada-xp-openblocks-ax3-4.dtb > dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ > dove-cubox.dtb \ > diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts > new file mode 100644 > index 0000000..c82a8e3 > --- /dev/null > +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts > @@ -0,0 +1,285 @@ > +/* > + * Device Tree file for Lenovo Iomega ix4-300d > + * > + * Copyright (C) 2014, Benoit Masson > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version > + * 2 of the License, or (at your option) any later version. > + */ > + > +/dts-v1/; > + > +#include > +#include > +#include "armada-xp-mv78230.dtsi" > + > +/ { > + model = "Lenovo Iomega ix4-300d"; > + compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230", > + "marvell,armadaxp", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = "/soc/internal-regs/serial@12000"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0 0x00000000 0 0x20000000>; /* 512MB */ > + }; > + > + soc { > + ranges = + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; > + > + pcie-controller { > + status = "okay"; > + > + /* Quad port sata: Marvell 88SX7042 */ > + pcie@1,0 { > + /* Port 0, Lane 0 */ > + status = "okay"; > + }; > + > + /* USB 3.0 xHCI controller: NEC D720200F1 */ > + pcie@5,0 { > + /* Port 1, Lane 0 */ > + status = "okay"; > + }; > + }; > + > + internal-regs { > + pinctrl { > + poweroff_pin: poweroff-pin { > + marvell,pins = "mpp24"; > + marvell,function = "gpio"; > + }; > + > + power_button_pin: power-button-pin { > + marvell,pins = "mpp44"; > + marvell,function = "gpio"; > + }; > + > + reset_button_pin: reset-button-pin { > + marvell,pins = "mpp45"; > + marvell,function = "gpio"; > + }; > + select_button_pin: select-button-pin { > + marvell,pins = "mpp41"; > + marvell,function = "gpio"; > + }; > + > + scroll_button_pin: scroll-button-pin { > + marvell,pins = "mpp42"; > + marvell,function = "gpio"; > + }; > + > + hdd_led_pin: hdd-led-pin { > + marvell,pins = "mpp26"; > + marvell,function = "gpio"; > + }; > + }; > + > + serial@12000 { > + status = "okay"; > + }; > + > + mdio { > + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ > + reg = <0>; > + }; > + > + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ > + reg = <1>; > + }; > + }; > + > + ethernet@70000 { > + status = "okay"; > + phy = <&phy0>; > + phy-mode = "rgmii-id"; > + }; > + > + ethernet@74000 { > + status = "okay"; > + phy = <&phy1>; > + phy-mode = "rgmii-id"; > + }; > + > + usb@50000 { > + status = "okay"; > + }; > + > + usb@51000 { > + status = "okay"; > + }; > + > + i2c@11000 { > + compatible = "marvell,mv64xxx-i2c"; O.K, this version is good. Acked-by: Andrew Lunn Andrew > + clock-frequency = <400000>; > + status = "okay"; > + > + adt7473@2e { > + compatible = "adi,adt7473"; > + reg = <0x2e>; > + }; > + > + pcf8563@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > + > + }; > + > + nand@d0000 { > + status = "okay"; > + num-cs = <1>; > + marvell,nand-keep-config; > + marvell,nand-enable-arbiter; > + nand-on-flash-bbt; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0000000 0xe0000>; > + read-only; > + }; > + > + partition@e0000 { > + label = "u-boot-env"; > + reg = <0xe0000 0x20000>; > + read-only; > + }; > + > + partition@100000 { > + label = "u-boot-env2"; > + reg = <0x100000 0x20000>; > + read-only; > + }; > + > + partition@120000 { > + label = "zImage"; > + reg = <0x120000 0x400000>; > + }; > + > + partition@520000 { > + label = "initrd"; > + reg = <0x520000 0x400000>; > + }; > + > + partition@xE00000 { > + label = "boot"; > + reg = <0xE00000 0x3F200000>; > + }; > + > + partition@flash { > + label = "flash"; > + reg = <0x0 0x40000000>; > + }; > + }; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-0 = <&power_button_pin &reset_button_pin > + &select_button_pin &scroll_button_pin>; > + pinctrl-names = "default"; > + > + power-button { > + label = "Power Button"; > + linux,code = ; > + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; > + }; > + > + reset-button { > + label = "Reset Button"; > + linux,code = ; > + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; > + }; > + > + select-button { > + label = "Select Button"; > + linux,code = ; > + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; > + }; > + > + scroll-button { > + label = "Scroll Button"; > + linux,code = ; > + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + spi3 { > + compatible = "spi-gpio"; > + status = "okay"; > + gpio-sck = <&gpio0 25 0>; > + gpio-mosi = <&gpio1 15 0>; /*gpio 47*/ > + cs-gpios = <&gpio0 27 0 >; > + num-chipselects = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio2: gpio2@0 { > + compatible = "fairchild,74hc595"; > + gpio-controller; > + #gpio-cells = <2>; > + reg = <0>; > + registers-number = <2>; > + spi-max-frequency = <100000>; > + }; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + pinctrl-0 = <&hdd_led_pin>; > + pinctrl-names = "default"; > + > + hdd-led { > + label = "ix4-300d:hdd:blue"; > + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + power-led { > + label = "ix4-300d:power:white"; > + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; > + /* init blinking while booting */ > + linux,default-trigger = "timer"; > + default-state = "on"; > + }; > + > + sysfail-led { > + label = "ix4-300d:sysfail:red"; > + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + sys-led { > + label = "ix4-300d:sys:blue"; > + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + hddfail-led { > + label = "ix4-300d:hddfail:red"; > + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + }; > + > + /* > + * Warning: you need both eth1 & 0 PHY initialized (i.e having > + * them up does the tweak) for poweroff to shutdown otherwise it > + * reboots > + */ > + gpio-poweroff { > + compatible = "gpio-poweroff"; > + pinctrl-0 = <&poweroff_pin>; > + pinctrl-names = "default"; > + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; > + }; > +}; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/