Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753758AbaG2Nu7 (ORCPT ); Tue, 29 Jul 2014 09:50:59 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:36721 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750933AbaG2Nu5 convert rfc822-to-8bit (ORCPT ); Tue, 29 Jul 2014 09:50:57 -0400 From: "Murphy, Dan" To: Mark Rutland CC: "linux-input@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "devicetree@vger.kernel.org" , "dmitry.torokhov@gmail.com" Subject: Re: [v2] input: drv260x: Add TI drv260x haptics driver Thread-Topic: [v2] input: drv260x: Add TI drv260x haptics driver Thread-Index: AQHPqoRzccs1z7hlMk6AmjOpJP7QQQ== Date: Tue, 29 Jul 2014 13:50:48 +0000 Message-ID: <00FC9A978A94B7418C33AFAE8A35ED49DB2AAD@DFLE09.ent.ti.com> References: <1406566403-1436-1-git-send-email-dmurphy@ti.com> <20140729093701.GJ2576@leverpostej> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [157.170.170.90] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Mark Thanks for the feedback On 07/29/2014 04:37 AM, Mark Rutland wrote: > On Mon, Jul 28, 2014 at 05:53:23PM +0100, Dan Murphy wrote: >> Add the TI drv260x haptics/vibrator driver. >> This device uses the input force feedback >> to produce a wave form to driver an >> ERM or LRA actuator device. >> >> The initial driver supports the devices >> real time playback mode. But the device >> has additional wave patterns in ROM. >> >> This functionality will be added in >> future patchsets. >> >> Product data sheet is located here: >> http://www.ti.com/product/drv2605 >> >> Signed-off-by: Dan Murphy >> --- >> >> v2 - Fixed binding doc and patch headline - https://patchwork.kernel.org/patch/4619641/ >> >> .../devicetree/bindings/input/ti,drv260x.txt | 44 ++ >> drivers/input/misc/Kconfig | 9 + >> drivers/input/misc/Makefile | 1 + >> drivers/input/misc/drv260x.c | 537 ++++++++++++++++++++ >> include/dt-bindings/input/ti-drv260x.h | 30 ++ >> include/linux/input/drv260x.h | 181 +++++++ >> 6 files changed, 802 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt >> create mode 100644 drivers/input/misc/drv260x.c >> create mode 100644 include/dt-bindings/input/ti-drv260x.h >> create mode 100644 include/linux/input/drv260x.h >> >> diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt >> new file mode 100644 >> index 0000000..930429b >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt >> @@ -0,0 +1,44 @@ >> +Texas Instruments - drv260x Haptics driver family >> + >> +The drv260x family serial control bus communicates through I2C protocols >> + >> +Required properties: >> + - compatible - One of: >> + "ti,drv2604" - DRV2604 >> + "ti,drv2605" - DRV2605 >> + "ti,drv2605l" - DRV2605L >> + - reg - I2C slave address >> + - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h) >> + DRV260X_RTP_MODE - Real time playback mode >> + DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric) >> + DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator) > > What exactly are these, and why does the kernel not decide? The LRA and ERM are vibrator types. These are specific to the product and the kernel cannot decide. The kernel driver needs to be told what type of vibrator is connected. The driver then sets the voltages and other settings to drive the vibrator type safely. All vibrators are dumb and do not have IDs identifying themselves so there is no self discovery here. RTP is not a vibrator type but just a mode you can place the device into. I can probably remove that and have the user space or driver take care of that setting. > >> + - library_sel - Library to use at power up (defined in include/dt-bindings/input/ti-drv260x.h) > > Please s/_/-/ in all property names. > >> + DRV260X_LIB_A - Pre-programmed Library >> + DRV260X_LIB_B - Pre-programmed Library >> + DRV260X_LIB_C - Pre-programmed Library >> + DRV260X_LIB_D - Pre-programmed Library >> + DRV260X_LIB_E - Pre-programmed Library >> + DRV260X_LIB_F - Pre-programmed Library > > What exactly are these, and why does the kernel not decide? > >> + >> +Optional properties: >> + - enable-gpio - gpio pin to enable/disable the device. >> + - vib_rated_voltage - The rated voltage of the actuator. If this is not >> + set then the value will be defaulted to 0x90 in the >> + driver. > > What units is this in? Good catch I was thinking this when I was writing the documentation but forgot to add it. I will fix the formatting here and below as well. > > Don't mention the driver, just say "if not 0x90" (but with a better > description of what 0x90 actually means). > OK >> + - vib_overdrive_voltage - The overdrive voltage of the actuator. >> + If this is not set then the value >> + will be defaulted to 0x90 in the driver. > > Similarly on both points. > > [...] > Same as above as well >> +static int drv260x_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + struct drv260x_data *haptics; >> + struct device_node *np = client->dev.of_node; >> + struct drv260x_platform_data *pdata = client->dev.platform_data; >> + struct ff_device *ff; >> + int ret; >> + int voltage; >> + >> + haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL); >> + if (!haptics) >> + return -ENOMEM; >> + >> + haptics->rated_voltage = DRV260X_DEF_OD_CLAMP_VOLT; >> + haptics->rated_voltage = DRV260X_DEF_RATED_VOLT; >> + >> + if (np) { >> + ret = of_property_read_u32(np, "mode", &haptics->mode); >> + if (ret < 0) { >> + dev_err(&client->dev, >> + "%s: No entry for mode\n", __func__); >> + >> + return ret; >> + } > > No sanity checking on the actual value? > > As far as I can see, haptics->mode is an int, not a u32. > Will fix this and all points below. >> + ret = of_property_read_u32(np, "library_sel", >> + &haptics->library); >> + if (ret < 0) { >> + dev_err(&client->dev, >> + "%s: No entry for library selection\n", __func__); >> + >> + return ret; >> + } > > Sanity checking? > > haptics->library is not a u32. > >> + ret = of_property_read_u32(np, "vib_rated_voltage", >> + &voltage); >> + if (!ret) >> + haptics->rated_voltage = drv260x_calculate_voltage(voltage); >> + >> + >> + ret = of_property_read_u32(np, "vib_overdrive_voltage", >> + &voltage); >> + if (!ret) >> + haptics->overdrive_voltage = drv260x_calculate_voltage(voltage); >> + > > And again, on both points. > >> + } else if (pdata) { >> + haptics->mode = pdata->mode; >> + haptics->library = pdata->library_selection; >> + if (pdata->vib_overdrive_voltage) >> + haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage); >> + if (pdata->vib_rated_voltage) >> + haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage); >> + } else { >> + dev_err(&client->dev, "Platform data not set\n"); >> + return -ENODEV; >> + } >> + >> + haptics->regulator = regulator_get(&client->dev, "vbat"); > > This wasn't in the binding. Yep will add it. Dan > > Thanks, > Mark. > -- ------------------ Dan Murphy -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/