Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753991AbaG3N5v (ORCPT ); Wed, 30 Jul 2014 09:57:51 -0400 Received: from mail.active-venture.com ([67.228.131.205]:59349 "EHLO mail.active-venture.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753286AbaG3N5t (ORCPT ); Wed, 30 Jul 2014 09:57:49 -0400 X-Originating-IP: 108.223.40.66 Message-ID: <53D8F9DA.2090607@roeck-us.net> Date: Wed, 30 Jul 2014 06:57:46 -0700 From: Guenter Roeck User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.0 MIME-Version: 1.0 To: Andreas Werner CC: Wim Van Sebroeck , Bryan Wu , lkml , Samuel Ortiz , Lee Jones , "rpurdie@rpsys.net" , Linux LED Subsystem , linux-watchdog@vger.kernel.org Subject: Re: [PATCH v3 3/3] drivers/leds/leds-menf21bmc: introduce MEN 14F021P00 BMC LED driver References: <20140725093728.GA1371@awelinux> <20140729211256.GB30849@spo001.leaseweb.com> <53D8165C.6000302@roeck-us.net> <20140730080839.GA455@awelinux> In-Reply-To: <20140730080839.GA455@awelinux> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 07/30/2014 01:08 AM, Andreas Werner wrote: > On Tue, Jul 29, 2014 at 02:47:08PM -0700, Guenter Roeck wrote: >> On 07/29/2014 02:12 PM, Wim Van Sebroeck wrote: >>> Hi Andreas, >>> >>>> aOn Thu, Jul 24, 2014 at 03:00:09PM -0700, Bryan Wu wrote: >>>>> On Thu, Jul 17, 2014 at 6:18 AM, Andreas Werner wrote: >>>>>> Added driver to support the 14F021P00 BMC LEDs. >>>>>> The BMC is a Board Management Controll include four LEDs which >>>>>> can be switched on and off. >>>>>> >>>>>> This driver use the I2C interface to the BMC using the menf21bmc MFD Core driver. >>>>>> >>>>>> Signed-off-by: Andreas Werner >>>>>> --- >>>>>> drivers/leds/Kconfig | 6 ++ >>>>>> drivers/leds/Makefile | 1 + >>>>>> drivers/leds/leds-menf21bmc.c | 134 ++++++++++++++++++++++++++++++++++++++++++ >>>>>> 3 files changed, 141 insertions(+) >>>>>> create mode 100644 drivers/leds/leds-menf21bmc.c >>>>>> >>>>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig >>>>>> index 27cf0cd..d38ff3f 100644 >>>>>> --- a/drivers/leds/Kconfig >>>>>> +++ b/drivers/leds/Kconfig >>>>>> @@ -458,6 +458,12 @@ config LEDS_OT200 >>>>>> This option enables support for the LEDs on the Bachmann OT200. >>>>>> Say Y to enable LEDs on the Bachmann OT200. >>>>>> >>>>>> +config LEDS_MENF21BMC >>>>>> + tristate "LED support for the MEN 14F021P00 BMC" >>>>>> + depends on LEDS_CLASS && MFD_MENF21BMC >>>>> >>>>> I think it also depends on I2C. >>>> >>>> Yes you are right. >>>> >>>>> >>>>>> + help >>>>>> + Say Y here to include support for the MEN 14F021P00 BMC LEDs. >>>>>> + >>>>>> comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" >>>>>> >>>>>> config LEDS_BLINKM >>>>>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile >>>>>> index 3c03666..cadc433 100644 >>>>>> --- a/drivers/leds/Makefile >>>>>> +++ b/drivers/leds/Makefile >>>>>> @@ -53,6 +53,7 @@ obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o >>>>>> obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o >>>>>> obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o >>>>>> obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o >>>>>> +obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o >>>>>> >>>>>> # LED SPI Drivers >>>>>> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o >>>>>> diff --git a/drivers/leds/leds-menf21bmc.c b/drivers/leds/leds-menf21bmc.c >>>>>> new file mode 100644 >>>>>> index 0000000..5eaa119 >>>>>> --- /dev/null >>>>>> +++ b/drivers/leds/leds-menf21bmc.c >>>>>> @@ -0,0 +1,134 @@ >>>>>> +/* >>>>>> + * MEN 14F021P00 Board Management Controller (BMC) LEDs Driver. >>>>>> + * >>>>>> + * This is the core LED driver of the MEN 14F021P00 BMC. >>>>>> + * There are four LEDs available which can be switched on and off. >>>>>> + * STATUS LED, HOT SWAP LED, USER LED 1, USER LED 2 >>>>>> + * >>>>>> + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH >>>>>> + * Author: Andreas Werner >>>>>> + * All rights reserved. >>>>>> + * >>>>>> + * This program is free software; you can redistribute it and/or modify it >>>>>> + * under the terms of the GNU General Public License as published by the >>>>>> + * Free Software Foundation; either version 2 of the License, or (at your >>>>>> + * option) any later version. >>>>>> + * >>>>>> + */ >>>>>> + >>>>>> +#include >>>>>> +#include >>>>>> +#include >>>>>> +#include >>>>>> +#include >>>>>> + >>>>>> +#define BMC_CMD_LED_GET_SET 0xA0 >>>>>> +#define BMC_BIT_LED_STATUS BIT(0) >>>>>> +#define BMC_BIT_LED_HOTSWAP BIT(1) >>>>>> +#define BMC_BIT_LED_USER1 BIT(2) >>>>>> +#define BMC_BIT_LED_USER2 BIT(3) >>>>>> + >>>>>> +struct menf21bmc_led { >>>>>> + struct led_classdev cdev; >>>>>> + u8 led_bit; >>>>>> + const char *name; >>>>>> + struct i2c_client *i2c_client; >>>>>> +}; >>>>>> + >>>>>> +static struct menf21bmc_led leds[] = { >>>>>> + { >>>>>> + .name = "menf21bmc:led_status", >>>>>> + .led_bit = BMC_BIT_LED_STATUS, >>>>>> + }, >>>>>> + { >>>>>> + .name = "menf21bmc:led_hotswap", >>>>>> + .led_bit = BMC_BIT_LED_HOTSWAP, >>>>>> + }, >>>>>> + { >>>>>> + .name = "menf21bmc:led_user1", >>>>>> + .led_bit = BMC_BIT_LED_USER1, >>>>>> + }, >>>>>> + { >>>>>> + .name = "menf21bmc:led_user2", >>>>>> + .led_bit = BMC_BIT_LED_USER2, >>>>>> + } >>>>>> +}; >>>>>> + >>>>>> +static DEFINE_MUTEX(led_lock); >>>>>> + >>>>>> +static void >>>>>> +menf21bmc_led_set(struct led_classdev *led_cdev, enum led_brightness value) >>>>>> +{ >>>>>> + int led_val; >>>>>> + struct menf21bmc_led *led = container_of(led_cdev, >>>>>> + struct menf21bmc_led, cdev); >>>>>> + >>>>>> + mutex_lock(&led_lock); >>>>>> + led_val = i2c_smbus_read_byte_data(led->i2c_client, >>>>>> + BMC_CMD_LED_GET_SET); >>>>>> + if (led_val < 0) >>>>>> + goto err_out; >>>>>> + >>>>>> + if (value == LED_OFF) >>>>>> + led_val &= ~led->led_bit; >>>>>> + else >>>>>> + led_val |= led->led_bit; >>>>>> + >>>>>> + i2c_smbus_write_byte_data(led->i2c_client, >>>>>> + BMC_CMD_LED_GET_SET, led_val); >>>>>> +err_out: >>>>>> + mutex_unlock(&led_lock); >>>>>> +} >>>>>> + >>>>>> +static int menf21bmc_led_probe(struct platform_device *pdev) >>>>>> +{ >>>>>> + int i; >>>>>> + int ret; >>>>>> + struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent); >>>>>> + >>>>>> + for (i = 0; i < ARRAY_SIZE(leds); i++) { >>>>>> + leds[i].cdev.name = leds[i].name; >>>>>> + leds[i].cdev.brightness_set = menf21bmc_led_set; >>>>>> + leds[i].i2c_client = i2c_client; >>>>>> + ret = led_classdev_register(&pdev->dev, &leds[i].cdev); >>>>>> + if (ret < 0) >>>>>> + goto err_free_leds; >>>>>> + } >>>>>> + dev_info(&pdev->dev, "MEN 140F21P00 BMC LED device enabled\n"); >>>>>> + >>>>>> + return 0; >>>>>> + >>>>>> +err_free_leds: >>>>>> + dev_err(&pdev->dev, "failed to register LED device\n"); >>>>>> + >>>>>> + for (i = i - 1; i >= 0; i--) >>>>>> + led_classdev_unregister(&leds[i].cdev); >>>>>> + >>>>>> + return ret; >>>>>> +} >>>>>> + >>>>>> +static int menf21bmc_led_remove(struct platform_device *pdev) >>>>>> +{ >>>>>> + int i; >>>>>> + >>>>>> + for (i = 0; i < ARRAY_SIZE(leds); i++) >>>>>> + led_classdev_unregister(&leds[i].cdev); >>>>>> + >>>>>> + return 0; >>>>>> +} >>>>>> + >>>>>> +static struct platform_driver menf21bmc_led = { >>>>>> + .probe = menf21bmc_led_probe, >>>>>> + .remove = menf21bmc_led_remove, >>>>>> + .driver = { >>>>>> + .name = "menf21bmc_led", >>>>>> + .owner = THIS_MODULE, >>>>>> + }, >>>>>> +}; >>>>>> + >>>>> >>>>> This is not a normal platform driver, it should be a I2C driver. >>>>> >>>>>> +module_platform_driver(menf21bmc_led); >>>>> >>>>> So please move to use module_i2c_driver. >>>> >>>> Ok, but then I have to change that in the watchdog driver too, which >>>> is quite the same as here. >>>> >>>> Lee, Guenther what do you think regarding the watchdog driver? >>> >>> If the watchdog part is indeed also i2c alike device then the watchdog part should also be an i2c driver... >>> >> >> Isn't this all the same chip ? If so, there should be only one i2c driver. >> Unless the i2c access is too complicated, it might make sense to use regmap >> to access the chip, and pass the regmap pointer to the mfd slave drivers >> to handle the actual communication with the chip. >> >> Guenter >> > > Yes this is all the same chip which has different features like LEDs and Watchdog. > This is why the mfd is the i2c_driver which instantiates the slave devices which > are platform drivers. > > Is that not the normal way to handle those device? > Is it really necessary to handle this to regmap? > Not really sure if 'necessary' is the right term, it is just convenient. Regmap takes care of register caching, for example, so you would not have to re-read register values again and again from the chip just to modify a bit of a register. You can pass the regmap pointer in the platform data, or you can pass the pointer to the i2c client. Using regmap makes the client driver independent of the i2c subsystem. The one thing you can _not_ do is to declare the client drivers to be i2c drivers. Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/