Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755374AbaG3RF3 (ORCPT ); Wed, 30 Jul 2014 13:05:29 -0400 Received: from top.free-electrons.com ([176.31.233.9]:57279 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755294AbaG3RF1 (ORCPT ); Wed, 30 Jul 2014 13:05:27 -0400 From: =?UTF-8?q?Antoine=20T=C3=A9nart?= To: sebastian.hesselbarth@gmail.com, tj@kernel.org, kishon@ti.com Cc: =?UTF-8?q?Antoine=20T=C3=A9nart?= , alexandre.belloni@free-electrons.com, thomas.petazzoni@free-electrons.com, zmxu@marvell.com, jszhang@marvell.com, linux-arm-kernel@lists.infradead.org, linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v13 0/8] ARM: berlin: add AHCI support Date: Wed, 30 Jul 2014 19:04:54 +0200 Message-Id: <1406739902-26311-1-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Kishon already took patches 1-2. Changes since v12: - rebased on top of libata/for-3.17 (with libata/for-3.16-fixes pulled in) - removed the host_flags argument - added a comment in ahci_host_priv for the inputs Changes since v11: - fixed a small issue in libahci Changes since v10: - made a 1:1 relation between PHYs and ports numbers - added a SoC specific compatible when using 'generic-ahci' Changes since v9: - moved port_map parameters into the AHCI structure Changes since v8: - stopped reset the controller from the PHY driver - removed fixed array sizes - got rid of the custom to_berlin_sata_phy_priv() macro - added dependency to HAS_IOMEM Changes since v7: - got back to the each PHY as a sub-node representation - renamed the power bit in the PHY driver Changes since v6: - added the 'clocks' property and support in the PHY driver - updated the PHY compatible Changes since v5: - rebased on top of v3.16-rc1 - added the 'clocks' property in the sata node Changes since v4: - updated PHY driver as tristate - handled the case were no SATA port is enabled - updated the compatible to a generic one - cosmetic fixups Changes since v3: - moved all PHY operations to the PHY driver - removed PHY sub-nodes - removed the custom Berlin AHCI driver and switched to ahci_platform - added multiple PHYs support to the libahci_platform Changes since v2: - modeled each PHY as a sub-node - cosmetic fixups Changes since v1: - added a PHY driver, allowing to enable each port individually and removed the 'force-port-map' property - made the drivers a bit less magic :) - wrote a function to select and configure registers in the AHCI driver - removed BG2 / BG2CD nodes Antoine Ténart (8): phy: add a driver for the Berlin SATA PHY Documentation: bindings: add the Berlin SATA PHY ata: libahci_platform: move port_map parameters into the AHCI structure ata: libahci: allow to use multiple PHYs ata: ahci_platform: add a generic AHCI compatible Documentation: bindings: document the sub-nodes AHCI bindings ARM: berlin: add the AHCI node for the BG2Q ARM: berlin: enable the eSATA interface on the BG2Q DMP .../devicetree/bindings/ata/ahci-platform.txt | 41 +++ .../devicetree/bindings/phy/berlin-sata-phy.txt | 34 +++ arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 8 + arch/arm/boot/dts/berlin2q.dtsi | 39 +++ drivers/ata/ahci.h | 17 +- drivers/ata/ahci_da850.c | 3 +- drivers/ata/ahci_imx.c | 3 +- drivers/ata/ahci_mvebu.c | 3 +- drivers/ata/ahci_platform.c | 8 +- drivers/ata/ahci_st.c | 2 +- drivers/ata/ahci_sunxi.c | 8 +- drivers/ata/ahci_xgene.c | 6 +- drivers/ata/libahci.c | 17 +- drivers/ata/libahci_platform.c | 202 +++++++++++---- drivers/phy/Kconfig | 7 + drivers/phy/Makefile | 1 + drivers/phy/phy-berlin-sata.c | 284 +++++++++++++++++++++ include/linux/ahci_platform.h | 5 +- 18 files changed, 601 insertions(+), 87 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt create mode 100644 drivers/phy/phy-berlin-sata.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/