Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756047AbaGaCX0 (ORCPT ); Wed, 30 Jul 2014 22:23:26 -0400 Received: from mail-pd0-f180.google.com ([209.85.192.180]:58056 "EHLO mail-pd0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751277AbaGaCXY (ORCPT ); Wed, 30 Jul 2014 22:23:24 -0400 Date: Wed, 30 Jul 2014 19:23:20 -0700 From: Brian Norris To: Rob Herring Cc: Arnd Bergmann , Olof Johansson , "devicetree@vger.kernel.org" , Florian Fainelli , Russell King , Christian Daudt , Linux Kernel , Matt Porter , Marc Carino , Gregory Fong , "linux-arm-kernel@lists.infradead.org" Subject: Re: [PATCH v8 01/11] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs Message-ID: <20140731022320.GM3711@ld-irv-0074> References: <1405976886-27807-1-git-send-email-computersforpeace@gmail.com> <1405976886-27807-2-git-send-email-computersforpeace@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Rob, I appreciate your comments, but where were many of these 5 months ago on the first 7 revisions? :) On a practical note: v9 is already queued for 3.17. Should I send patches for the 3.17 cycle (or later) to fixup some of these issues? Or would you recommend pulling the patches out of Matt Porter's tree now, and reintroducing for 3.18? (I would be much happier with the first.) I do note that we at least need to fix allmodconfig ASAP; I'll reply to Russell on that one. On Wed, Jul 30, 2014 at 12:09:48PM -0500, Rob Herring wrote: > On Mon, Jul 21, 2014 at 4:07 PM, Brian Norris wrote: > > From: Marc Carino > > > > The BCM7xxx series of Broadcom SoCs are used primarily in set-top boxes. > > > > This patch adds machine support for the ARM-based Broadcom SoCs. > > > > Signed-off-by: Marc Carino > > Signed-off-by: Brian Norris > > --- > > arch/arm/configs/multi_v7_defconfig | 1 + > > arch/arm/mach-bcm/Kconfig | 14 ++ > > arch/arm/mach-bcm/Makefile | 5 + > > arch/arm/mach-bcm/brcmstb.c | 28 +++ > > arch/arm/mach-bcm/brcmstb.h | 19 ++ > > arch/arm/mach-bcm/headsmp-brcmstb.S | 33 ++++ > > arch/arm/mach-bcm/platsmp-brcmstb.c | 363 ++++++++++++++++++++++++++++++++++++ > > 7 files changed, 463 insertions(+) > > create mode 100644 arch/arm/mach-bcm/brcmstb.c > > create mode 100644 arch/arm/mach-bcm/brcmstb.h > > create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S > > create mode 100644 arch/arm/mach-bcm/platsmp-brcmstb.c > > > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > > index 534836497998..bf0df396a3cf 100644 > > --- a/arch/arm/configs/multi_v7_defconfig > > +++ b/arch/arm/configs/multi_v7_defconfig > > @@ -19,6 +19,7 @@ CONFIG_MACH_DOVE=y > > CONFIG_ARCH_BCM=y > > CONFIG_ARCH_BCM_MOBILE=y > > CONFIG_ARCH_BCM_5301X=y > > +CONFIG_ARCH_BRCMSTB=y > > CONFIG_ARCH_BERLIN=y > > CONFIG_MACH_BERLIN_BG2=y > > CONFIG_MACH_BERLIN_BG2CD=y > > diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig > > index 41c839167e87..0073633e7699 100644 > > --- a/arch/arm/mach-bcm/Kconfig > > +++ b/arch/arm/mach-bcm/Kconfig > > @@ -87,4 +87,18 @@ config ARCH_BCM_5301X > > different SoC or with the older BCM47XX and BCM53XX based > > network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx > > > > +config ARCH_BRCMSTB > > + bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7 > > + depends on MMU > > This was implied, but there are some patches from Arnd in this area. > Does it really not build with !MMU? I suppose it probably builds, it likely won't run. I can drop this line and then reassess if ARCH_MULTIPLATFORM becomes buildable with !MMU. > > + select ARM_GIC > > > + select MIGHT_HAVE_PCI > > + select HAVE_SMP > > At least HAVE_SMP is for sure, but I think both of these are selected already . You're correct. ARCH_MULTIPLATFORM selects MIGHT_HAVE_PCI and ARCH_MULTI_V7 selects HAVE_SMP. I can look at dropping these. > > + select HAVE_ARM_ARCH_TIMER > > + help > > + Say Y if you intend to run the kernel on a Broadcom ARM-based STB > > + chipset. > > + > > + This enables support for Broadcom ARM-based set-top box chipsets, > > + including the 7445 family of chips. > > + > > endif > > diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile > > index 731292114975..f3665121729b 100644 > > --- a/arch/arm/mach-bcm/Makefile > > +++ b/arch/arm/mach-bcm/Makefile > > @@ -30,3 +30,8 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o > > > > # BCM5301X > > obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o > > + > > +ifeq ($(CONFIG_ARCH_BRCMSTB),y) > > +obj-y += brcmstb.o > > +obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o > > +endif > > diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c > > new file mode 100644 > > index 000000000000..60a5afa06ed7 > > --- /dev/null > > +++ b/arch/arm/mach-bcm/brcmstb.c > > @@ -0,0 +1,28 @@ > > +/* > > + * Copyright (C) 2013-2014 Broadcom Corporation > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation version 2. > > + * > > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > > + * kind, whether express or implied; without even the implied warranty > > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include > > +#include > > + > > +#include > > +#include > > + > > +static const char *brcmstb_match[] __initconst = { > > + "brcm,bcm7445", > > + "brcm,brcmstb", > > + NULL > > +}; > > + > > +DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)") > > + .dt_compat = brcmstb_match, > > +MACHINE_END > > Do you plan to add more here? Otherwise you don't need this file. Probably eventually, but not yet (there's out-of-tree stuff that hasn't been integrated); should we drop the file until it's needed? (Over 9 revisions, this file has evolved. And the CPU_METHOD_OF_DECLARE stuff appearing in the meantime, which cut this file down to a no-op.) > > diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h > > new file mode 100644 > > index 000000000000..ec0c3d112b36 > > --- /dev/null > > +++ b/arch/arm/mach-bcm/brcmstb.h > > @@ -0,0 +1,19 @@ > > +/* > > + * Copyright (C) 2013-2014 Broadcom Corporation > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation version 2. > > + * > > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > > + * kind, whether express or implied; without even the implied warranty > > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#ifndef __BRCMSTB_H__ > > +#define __BRCMSTB_H__ > > + > > +void brcmstb_secondary_startup(void); > > + > > +#endif /* __BRCMSTB_H__ */ > > diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S > > new file mode 100644 > > index 000000000000..199c1ea58248 > > --- /dev/null > > +++ b/arch/arm/mach-bcm/headsmp-brcmstb.S > > @@ -0,0 +1,33 @@ > > +/* > > + * SMP boot code for secondary CPUs > > + * Based on arch/arm/mach-tegra/headsmp.S > > + * > > + * Copyright (C) 2010 NVIDIA, Inc. > > + * Copyright (C) 2013-2014 Broadcom Corporation > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation version 2. > > + * > > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > > + * kind, whether express or implied; without even the implied warranty > > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include > > +#include > > +#include > > + > > + .section ".text.head", "ax" > > + > > +ENTRY(brcmstb_secondary_startup) > > + /* > > + * Ensure CPU is in a sane state by disabling all IRQs and switching > > + * into SVC mode. > > + */ > > + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 > > + > > + bl v7_invalidate_l1 > > This should be in your boot code. That is part of the documented entry > requirements. By "documented" are you referring to the ARM TRM? Wouldn't any "boot code" requirements only apply to CPU0? Linux prepares the non-boot CPUs for SMP, as you see here. > Also, if you are coming straight from reset, there is > other setup probably missing. Like what? > Yes, there are others with this, but that doesn't make it right. > > > + b secondary_startup > > +ENDPROC(brcmstb_secondary_startup) > > diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c > > new file mode 100644 > > index 000000000000..af780e9c23a6 > > --- /dev/null > > +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c > > @@ -0,0 +1,363 @@ > > +/* > > + * Broadcom STB CPU SMP and hotplug support for ARM > > + * > > + * Copyright (C) 2013-2014 Broadcom Corporation > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation version 2. > > + * > > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > > + * kind, whether express or implied; without even the implied warranty > > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#include > > +#include > > +#include > > +#include > > + > > +#include "brcmstb.h" > > + > > +enum { > > + ZONE_MAN_CLKEN_MASK = BIT(0), > > + ZONE_MAN_RESET_CNTL_MASK = BIT(1), > > + ZONE_MAN_MEM_PWR_MASK = BIT(4), > > + ZONE_RESERVED_1_MASK = BIT(5), > > + ZONE_MAN_ISO_CNTL_MASK = BIT(6), > > + ZONE_MANUAL_CONTROL_MASK = BIT(7), > > + ZONE_PWR_DN_REQ_MASK = BIT(9), > > + ZONE_PWR_UP_REQ_MASK = BIT(10), > > + ZONE_BLK_RST_ASSERT_MASK = BIT(12), > > + ZONE_PWR_OFF_STATE_MASK = BIT(25), > > + ZONE_PWR_ON_STATE_MASK = BIT(26), > > + ZONE_DPG_PWR_STATE_MASK = BIT(28), > > + ZONE_MEM_PWR_STATE_MASK = BIT(29), > > + ZONE_RESET_STATE_MASK = BIT(31), > > + CPU0_PWR_ZONE_CTRL_REG = 1, > > + CPU_RESET_CONFIG_REG = 2, > > +}; > > + > > +static void __iomem *cpubiuctrl_block; > > +static void __iomem *hif_cont_block; > > +static u32 cpu0_pwr_zone_ctrl_reg; > > +static u32 cpu_rst_cfg_reg; > > +static u32 hif_cont_reg; > > + > > +#ifdef CONFIG_HOTPLUG_CPU > > +static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); > > + > > +static int per_cpu_sw_state_rd(u32 cpu) > > +{ > > + sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); > > + return per_cpu(per_cpu_sw_state, cpu); > > +} > > + > > +static void per_cpu_sw_state_wr(u32 cpu, int val) > > +{ > > + per_cpu(per_cpu_sw_state, cpu) = val; > > + dmb(); > > + sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); > > + dsb_sev(); > > Barriers need to be documented why they are needed. (NB: I see approximately 3 total existing cases where there is a comment near a dsb()/dsb_sev().) This was actually adapted from the mcpm code, and (1) I think the dmb() is in the wrong place (it should be the first thing in this function); (2) the SEV is unnecessary (we don't use WFE; just a cache-invalidated polling loop); and (3) the DSB is also unnecessary, since sync_cache_w() handles its own barriers. Plus, we should probably add some comments to describe what's going on here. (Follow-up patch?) > > +} > > +#else > > +static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } > > +#endif > > + > > +static void __iomem *pwr_ctrl_get_base(u32 cpu) > > +{ > > + void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; > > + base += (cpu_logical_map(cpu) * 4); > > + return base; > > +} > > + > > +static u32 pwr_ctrl_rd(u32 cpu) > > +{ > > + void __iomem *base = pwr_ctrl_get_base(cpu); > > + return readl_relaxed(base); > > +} > > + > > +static void pwr_ctrl_wr(u32 cpu, u32 val) > > +{ > > + void __iomem *base = pwr_ctrl_get_base(cpu); > > + writel(val, base); > > +} > > + > > +static void cpu_rst_cfg_set(u32 cpu, int set) > > +{ > > + u32 val; > > + val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); > > + if (set) > > + val |= BIT(cpu_logical_map(cpu)); > > + else > > + val &= ~BIT(cpu_logical_map(cpu)); > > + writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); > > +} > > + > > +static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) > > +{ > > + const int reg_ofs = cpu_logical_map(cpu) * 8; > > + writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); > > + writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); > > +} > > + > > +static void brcmstb_cpu_boot(u32 cpu) > > +{ > > + pr_info("SMP: Booting CPU%d...\n", cpu); > > The core already prints messages. Ok, we can drop. > > + > > + /* > > + * set the reset vector to point to the secondary_startup > > + * routine > > + */ > > + cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); > > + > > + /* unhalt the cpu */ > > + cpu_rst_cfg_set(cpu, 0); > > +} > > + > > +static void brcmstb_cpu_power_on(u32 cpu) > > +{ > > + /* > > + * The secondary cores power was cut, so we must go through > > + * power-on initialization. > > + */ > > + u32 tmp; > > + > > + pr_info("SMP: Powering up CPU%d...\n", cpu); > > ditto. > > > + > > + /* Request zone power up */ > > + pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); > > + > > + /* Wait for the power up FSM to complete */ > > + do { > > + tmp = pwr_ctrl_rd(cpu); > > + } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); > > Perhaps a timeout? Or perhaps you don't need to wait here. The core > code will wait for the core to come online. I believe we do have to wait for power before we can proceed to poke the core. This is a quirk of our chip, explained below. But sure, I could try to add a timeout. > > + > > + per_cpu_sw_state_wr(cpu, 1); > > The kernel already tracks the state. Yes, but it doesn't synchronize cpu_die() and cpu_kill(). But I see you objected below. > > +} > > + > > +static int brcmstb_cpu_get_power_state(u32 cpu) > > +{ > > + int tmp = pwr_ctrl_rd(cpu); > > + return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; > > +} > > + > > +#ifdef CONFIG_HOTPLUG_CPU > > + > > +static void brcmstb_cpu_die(u32 cpu) > > +{ > > + v7_exit_coherency_flush(all); > > + > > + /* Prevent all interrupts from reaching this CPU. */ > > + arch_local_irq_disable(); > > Surely that is already done? True. Third line in arch/arm/kernel/smp.c cpu_die(). I believe we can drop this. > And disabling IRQ has no effect on > wake-up from WFI. > > > + > > + /* > > + * Final full barrier to ensure everything before this instruction has > > + * quiesced. > > + */ > > + isb(); > > + dsb(); > > + > > + per_cpu_sw_state_wr(cpu, 0); > > + > > + /* Sit and wait to die */ > > + wfi(); > > + > > + /* We should never get here... */ > > + panic("Spurious interrupt on CPU %d received!\n", cpu); > > +} > > + > > +static int brcmstb_cpu_kill(u32 cpu) > > +{ > > + u32 tmp; > > + > > + pr_info("SMP: Powering down CPU%d...\n", cpu); > > + > > + while (per_cpu_sw_state_rd(cpu)) > > + ; > > I don't think this is necessary. You don't need to synchronize die and > kill. Look at other implementations that actually power down the core > (vs. just wfi). Hmm, I'm pretty sure the synchronization is required for our B15 core. If we yank the power before the core has properly quiesced, the whole CPU complex will lock up. (Similar story for the power-up while loop you complained about above.) > > + > > + /* Program zone reset */ > > + pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | > > + ZONE_PWR_DN_REQ_MASK); > > + > > + /* Verify zone reset */ > > + tmp = pwr_ctrl_rd(cpu); > > + if (!(tmp & ZONE_RESET_STATE_MASK)) > > + pr_err("%s: Zone reset bit for CPU %d not asserted!\n", > > + __func__, cpu); > > + > > + /* Wait for power down */ > > + do { > > + tmp = pwr_ctrl_rd(cpu); > > + } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); > > + > > + /* Settle-time from Broadcom-internal DVT reference code */ > > + udelay(7); > > + > > + /* Assert reset on the CPU */ > > + cpu_rst_cfg_set(cpu, 1); > > + > > + return 1; > > +} > > + > > +#endif /* CONFIG_HOTPLUG_CPU */ > > + > > +static int __init setup_hifcpubiuctrl_regs(struct device_node *np) > > +{ > > + int rc = 0; > > + char *name; > > + struct device_node *syscon_np = NULL; > > + > > + name = "syscon-cpu"; > > + > > + syscon_np = of_parse_phandle(np, name, 0); > > + if (!syscon_np) { > > + pr_err("can't find phandle %s\n", name); > > + rc = -EINVAL; > > + goto cleanup; > > + } > > + > > + cpubiuctrl_block = of_iomap(syscon_np, 0); > > + if (!cpubiuctrl_block) { > > + pr_err("iomap failed for cpubiuctrl_block\n"); > > + rc = -EINVAL; > > + goto cleanup; > > + } > > + > > + rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, > > + &cpu0_pwr_zone_ctrl_reg); > > + if (rc) { > > + pr_err("failed to read 1st entry from %s property (%d)\n", name, > > + rc); > > + rc = -EINVAL; > > + goto cleanup; > > + } > > + > > + rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, > > + &cpu_rst_cfg_reg); > > + if (rc) { > > + pr_err("failed to read 2nd entry from %s property (%d)\n", name, > > + rc); > > + rc = -EINVAL; > > + goto cleanup; > > + } > > + > > +cleanup: > > + if (syscon_np) > > + of_node_put(syscon_np); > > + > > + return rc; > > +} > > + > > +static int __init setup_hifcont_regs(struct device_node *np) > > +{ > > + int rc = 0; > > + char *name; > > + struct device_node *syscon_np = NULL; > > + > > + name = "syscon-cont"; > > + > > + syscon_np = of_parse_phandle(np, name, 0); > > + if (!syscon_np) { > > + pr_err("can't find phandle %s\n", name); > > + rc = -EINVAL; > > + goto cleanup; > > + } > > + > > + hif_cont_block = of_iomap(syscon_np, 0); > > + if (!hif_cont_block) { > > + pr_err("iomap failed for hif_cont_block\n"); > > + rc = -EINVAL; > > + goto cleanup; > > + } > > + > > + /* offset is at top of hif_cont_block */ > > + hif_cont_reg = 0; > > + > > +cleanup: > > + if (syscon_np) > > + of_node_put(syscon_np); > > + > > + return rc; > > +} > > + > > +static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) > > +{ > > + int rc; > > + struct device_node *np; > > + char *name; > > + > > + name = "brcm,brcmstb-smpboot"; > > + np = of_find_compatible_node(NULL, NULL, name); > > + if (!np) { > > + pr_err("can't find compatible node %s\n", name); > > + return; > > + } > > + > > + rc = setup_hifcpubiuctrl_regs(np); > > + if (rc) > > + return; > > + > > + rc = setup_hifcont_regs(np); > > + if (rc) > > + return; > > +} > > + > > +static DEFINE_SPINLOCK(boot_lock); > > + > > +static void brcmstb_secondary_init(unsigned int cpu) > > +{ > > + /* > > + * Synchronise with the boot thread. > > + */ > > + spin_lock(&boot_lock); > > + spin_unlock(&boot_lock); > > I suggest you read previous discussions on attempts to make this > common before replying to Russell. Can you point me to this discussion? linux-arm-kernel is a big and noisy world... BTW, I'm not sure the boot_lock is actually necessary at all for us; it was just borrowed from one of the other mach-*'s. The synchronization we need is done in the while loops above. > > +} > > + > > +static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) > > +{ > > + /* > > + * set synchronisation state between this boot processor > > + * and the secondary one > > + */ > > + spin_lock(&boot_lock); > > + > > + /* Bring up power to the core if necessary */ > > + if (brcmstb_cpu_get_power_state(cpu) == 0) > > + brcmstb_cpu_power_on(cpu); > > + > > + brcmstb_cpu_boot(cpu); > > + > > + /* > > + * now the secondary core is starting up let it run its > > + * calibrations, then wait for it to finish > > + */ > > + spin_unlock(&boot_lock); > > + > > + return 0; > > +} > > + > > +static struct smp_operations brcmstb_smp_ops __initdata = { > > + .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, > > + .smp_secondary_init = brcmstb_secondary_init, > > + .smp_boot_secondary = brcmstb_boot_secondary, > > +#ifdef CONFIG_HOTPLUG_CPU > > + .cpu_kill = brcmstb_cpu_kill, > > + .cpu_die = brcmstb_cpu_die, > > +#endif > > +}; > > + > > +CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); Brian -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/