Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1752355AbaJBMIH (ORCPT <rfc822;w@1wt.eu>);
	Thu, 2 Oct 2014 08:08:07 -0400
Received: from ns.mm-sol.com ([37.157.136.199]:45421 "EHLO extserv.mm-sol.com"
	rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
	id S1751429AbaJBMIE (ORCPT <rfc822;linux-kernel@vger.kernel.org>);
	Thu, 2 Oct 2014 08:08:04 -0400
Message-ID: <1412251686.1027.15.camel@iivanov-dev>
Subject: Re: [PATCH v3 1/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: jic23@kernel.org, lars <lars@metafoo.de>, sachin.kamat@linaro.org,
        srinivas.pandruvada@linux.intel.com, linux-iio@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org
Date: Thu, 02 Oct 2014 15:08:06 +0300
In-Reply-To: <542D1B11.8070600@mm-sol.com>
References: <1411563415-11933-1-git-send-email-svarbanov@mm-sol.com>
	 <1411563415-11933-2-git-send-email-svarbanov@mm-sol.com>
	 <542D1B11.8070600@mm-sol.com>
Content-Type: text/plain; charset="UTF-8"
X-Mailer: Evolution 3.10.4-0ubuntu2 
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

+iio maintainers

On Thu, 2014-10-02 at 12:29 +0300, Ivan T. Ivanov wrote:
> Hi Stan,
> 
> On 09/24/2014 03:56 PM, Stanimir Varbanov wrote:
> 
> <snip>
> 
> > +static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
> > +{
> > +	struct iio_chan_spec *iio_chan = vadc->iio_chans;
> > +	const struct vadc_channels *vadc_chan;
> > +	struct vadc_channel_prop prop;
> > +	struct device_node *child;
> > +	int ret, index = 0;
> > +
> > +	for_each_available_child_of_node(node, child) {
> > +		ret = vadc_get_dt_channel_data(vadc->dev, &prop, child);
> > +		if (ret)
> > +			return ret;
> > +
> > +		vadc->chan_props[index] = prop;
> > +
> > +		vadc_chan = &vadc_chans[prop.channel];
> > +
> > +		iio_chan->channel = prop.channel;
> > +		iio_chan->datasheet_name = vadc_chan->datasheet_name;
> > +		iio_chan->info_mask_separate = vadc_chan->info_mask;
> > +		iio_chan->type = vadc_chan->type;
> > +		iio_chan->indexed = 1;
> > +		iio_chan->scan_type.sign = 's';
> > +		iio_chan->scan_type.realbits = 15;
> > +		iio_chan->scan_type.storagebits = 16;
> > +		iio_chan->address = index++;
> > +
> > +		iio_chan++;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> 
> <snip>
> 
> > +static int vadc_probe(struct platform_device *pdev)
> > +{
> 
> <snip>
> 
> > +
> > +	indio_dev->dev.parent = dev;
> > +	indio_dev->dev.of_node = node;
> > +	indio_dev->name = pdev->name;
> > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > +	indio_dev->info = &vadc_info;
> > +	indio_dev->channels = vadc->iio_chans;
> > +	indio_dev->num_channels = vadc->nchannels;
> 
> This will not work as we thought. Registration will be fine and entries
> in sysfs are created as expected, but this is breaking numbering scheme
> for client drivers. For us the problem is that iio framework expect channels
> numbering to be linear and channel number should not be greater than
> channel count. For example even if die temperature channel is always 8, if
> I describe only 5 channels in DTS files (4 for reference points measurement)
> and 1 for die temperature, clients could not get OF reference to 
> temperature
> channel using io-channels = <&pm8941_vadc 8>;
> 
> Jonathan, please, could you advise us.
> 
> Regards,
> Ivan
> 
> > +
> > +	return devm_iio_device_register(dev, indio_dev);
> > +}
> > +
> >
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/