Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753507AbaJBN3t (ORCPT ); Thu, 2 Oct 2014 09:29:49 -0400 Received: from lists.s-osg.org ([54.187.51.154]:39065 "EHLO lists.s-osg.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752410AbaJBN3q (ORCPT ); Thu, 2 Oct 2014 09:29:46 -0400 Date: Thu, 2 Oct 2014 10:29:38 -0300 From: Mauro Carvalho Chehab To: Amber Thrall Cc: jarod@wilsonet.com, linux-media@vger.kernel.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH] Fixed all coding style issues for drivers/staging/media/lirc/ Message-ID: <20141002102938.2b762583@recife.lan> In-Reply-To: <1412224802-28431-1-git-send-email-amber.rose.thrall@gmail.com> References: <1412224802-28431-1-git-send-email-amber.rose.thrall@gmail.com> Organization: Samsung X-Mailer: Claws Mail 3.10.1 (GTK+ 2.24.24; x86_64-redhat-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Em Wed, 01 Oct 2014 21:40:02 -0700 Amber Thrall escreveu: > Fixed various coding style issues, including strings over 80 characters long and many > deprecated printk's have been replaced with proper methods. > > Signed-off-by: Amber Thrall > --- > drivers/staging/media/lirc/lirc_bt829.c | 2 +- > drivers/staging/media/lirc/lirc_imon.c | 4 +- > drivers/staging/media/lirc/lirc_sasem.c | 6 +-- > drivers/staging/media/lirc/lirc_serial.c | 29 ++++++-------- > drivers/staging/media/lirc/lirc_sir.c | 3 +- > drivers/staging/media/lirc/lirc_zilog.c | 69 +++++++++++++++----------------- > 6 files changed, 52 insertions(+), 61 deletions(-) > > diff --git a/drivers/staging/media/lirc/lirc_bt829.c b/drivers/staging/media/lirc/lirc_bt829.c > index 4c806ba..c70ca68 100644 > --- a/drivers/staging/media/lirc/lirc_bt829.c > +++ b/drivers/staging/media/lirc/lirc_bt829.c > @@ -59,7 +59,7 @@ static bool debug; > #define dprintk(fmt, args...) \ > do { \ > if (debug) \ > - printk(KERN_DEBUG DRIVER_NAME ": "fmt, ## args); \ > + dev_dbg(DRIVER_NAME, ": "fmt, ##args); \ Please don't do that. If dynamic printk is enabled, that would mean that someone needing to use the debug prints would need to both load the module with debug=1 and enable the debug prints via sysfs. In this specific case, probably the best would be to just replace dprintk for dev_dbg or pr_dbg and remove the macro. Also, please notice that dev_dbg() is defined as: #define dev_dbg(dev, format, arg...) So, the dev argument should be passed to it. You'll need to be sure that you have dev on all places and that it was already initialized on all places you use it, or otherwise you'll break compilation (or runtime, if you use an initialized dev). > } while (0) > > static int atir_minor; > diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c > index 7aca44f..bce0408 100644 > --- a/drivers/staging/media/lirc/lirc_imon.c > +++ b/drivers/staging/media/lirc/lirc_imon.c > @@ -623,8 +623,8 @@ static void imon_incoming_packet(struct imon_context *context, > if (debug) { > dev_info(dev, "raw packet: "); > for (i = 0; i < len; ++i) > - printk("%02x ", buf[i]); > - printk("\n"); > + dev_info(dev, "%02x ", buf[i]); > + dev_info(dev, "\n"); > } This is wrong, as the second printk should be printk_cont. The best here would be to change all above to use %*ph. So, just: dev_debug(dev, "raw packet: %*ph\n", len, buf); > > /* > diff --git a/drivers/staging/media/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c > index c20ef56..e88e246 100644 > --- a/drivers/staging/media/lirc/lirc_sasem.c > +++ b/drivers/staging/media/lirc/lirc_sasem.c > @@ -583,10 +583,10 @@ static void incoming_packet(struct sasem_context *context, > } > > if (debug) { > - printk(KERN_INFO "Incoming data: "); > + pr_info("Incoming data: "); > for (i = 0; i < 8; ++i) > - printk(KERN_CONT "%02x ", buf[i]); > - printk(KERN_CONT "\n"); > + pr_cont("%02x", buf[i]); > + pr_cont("\n"); > } Same as above: use %*ph. > > /* > diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c > index 181b92b..b07671b 100644 > --- a/drivers/staging/media/lirc/lirc_serial.c > +++ b/drivers/staging/media/lirc/lirc_serial.c > @@ -116,8 +116,7 @@ static bool txsense; /* 0 = active high, 1 = active low */ > #define dprintk(fmt, args...) \ > do { \ > if (debug) \ > - printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ > - fmt, ## args); \ > + dev_dbg(LIRC_DRIVER_NAME, ": "fmt, ##args); \ > } while (0) Again, see my comment #1. > > /* forward declarations */ > @@ -356,9 +355,8 @@ static int init_timing_params(unsigned int new_duty_cycle, > /* Derive pulse and space from the period */ > pulse_width = period * duty_cycle / 100; > space_width = period - pulse_width; > - dprintk("in init_timing_params, freq=%d, duty_cycle=%d, " > - "clk/jiffy=%ld, pulse=%ld, space=%ld, " > - "conv_us_to_clocks=%ld\n", > + dprintk("in init_timing_params, freq=%d, duty_cycle=%d, clk/jiffy=%ld, > + pulse=%ld, space=%ld, conv_us_to_clocks=%ld\n", > freq, duty_cycle, __this_cpu_read(cpu_info.loops_per_jiffy), > pulse_width, space_width, conv_us_to_clocks); > return 0; > @@ -1075,7 +1073,7 @@ static int __init lirc_serial_init(void) > > result = platform_driver_register(&lirc_serial_driver); > if (result) { > - printk("lirc register returned %d\n", result); > + dprintk("lirc register returned %d\n", result); > goto exit_buffer_free; > } > > @@ -1166,22 +1164,20 @@ module_init(lirc_serial_init_module); > module_exit(lirc_serial_exit_module); > > MODULE_DESCRIPTION("Infra-red receiver driver for serial ports."); > -MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, " > - "Christoph Bartelmus, Andrei Tanas"); > +MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, Christoph Bartelmus, Andrei Tanas"); > MODULE_LICENSE("GPL"); > > module_param(type, int, S_IRUGO); > -MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo," > - " 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug," > - " 5 = NSLU2 RX:CTS2/TX:GreenLED)"); > +MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, > + 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug, > + 5 = NSLU2 RX:CTS2/TX:GreenLED)"); No, please don't do that. The previous code is better to read than the second one. Also, you're adding extra \n there. > > module_param(io, int, S_IRUGO); > MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); > > /* some architectures (e.g. intel xscale) have memory mapped registers */ > module_param(iommap, bool, S_IRUGO); > -MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O" > - " (0 = no memory mapped io)"); > +MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory mapped io)"); > > /* > * some architectures (e.g. intel xscale) align the 8bit serial registers > @@ -1198,13 +1194,12 @@ module_param(share_irq, bool, S_IRUGO); > MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)"); > > module_param(sense, int, S_IRUGO); > -MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit" > - " (0 = active high, 1 = active low )"); > +MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit > + (0 = active high, 1 = active low )"); Same as my above comment. > #ifdef CONFIG_LIRC_SERIAL_TRANSMITTER > module_param(txsense, bool, S_IRUGO); > -MODULE_PARM_DESC(txsense, "Sense of transmitter circuit" > - " (0 = active high, 1 = active low )"); > +MODULE_PARM_DESC(txsense, "Sense of transmitter circuit (0 = active high, 1 = active low )"); > #endif > > module_param(softcarrier, bool, S_IRUGO); > diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c > index 2ee55ea..cdbb71f 100644 > --- a/drivers/staging/media/lirc/lirc_sir.c > +++ b/drivers/staging/media/lirc/lirc_sir.c > @@ -143,8 +143,7 @@ static bool debug; > #define dprintk(fmt, args...) \ > do { \ > if (debug) \ > - printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ > - fmt, ## args); \ > + dev_dbg(LIRC_DRIVER_NAME, ": "fmt, ## args); \ > } while (0) See my comment #1. Well, I'm repeat myself too many times.. You got it. The same issues I pointed above also applies to the code below. Regards, Mauro > > /* SECTION: Prototypes */ > diff --git a/drivers/staging/media/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c > index 567feba..9c3a3d7 100644 > --- a/drivers/staging/media/lirc/lirc_zilog.c > +++ b/drivers/staging/media/lirc/lirc_zilog.c > @@ -152,10 +152,9 @@ struct tx_data_struct { > static struct tx_data_struct *tx_data; > static struct mutex tx_data_lock; > > -#define zilog_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, \ > - ## args) > -#define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) > -#define zilog_info(s, args...) printk(KERN_INFO KBUILD_MODNAME ": " s, ## args) > +#define zilog_notify(s, args...) dev_notice(KBUILD_MODNAME, ": " s, ## args) > +#define zilog_error(s, args...) dev_err(KBUILD_MODNAME, ": " s, ## args) > +#define zilog_info(s, args...) dev_info(KBUILD_MODNAME, ": " s, ## args) > > /* module parameters */ > static bool debug; /* debug output */ > @@ -165,8 +164,7 @@ static int minor = -1; /* minor number */ > #define dprintk(fmt, args...) \ > do { \ > if (debug) \ > - printk(KERN_DEBUG KBUILD_MODNAME ": " fmt, \ > - ## args); \ > + pr_dbg(KBUILD_MODNAME, ": " fmt, ## args); \ > } while (0) > > > @@ -382,14 +380,14 @@ static int add_to_buf(struct IR *ir) > zilog_error("i2c_master_send failed with %d\n", ret); > if (failures >= 3) { > mutex_unlock(&ir->ir_lock); > - zilog_error("unable to read from the IR chip " > - "after 3 resets, giving up\n"); > + zilog_error("unable to read from the IR chip > + after 3 resets, giving up\n"); > break; > } > > /* Looks like the chip crashed, reset it */ > - zilog_error("polling the IR receiver chip failed, " > - "trying reset\n"); > + zilog_error("polling the IR receiver chip failed, > + trying reset\n"); > > set_current_state(TASK_UNINTERRUPTIBLE); > if (kthread_should_stop()) { > @@ -415,8 +413,8 @@ static int add_to_buf(struct IR *ir) > ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf)); > mutex_unlock(&ir->ir_lock); > if (ret != sizeof(keybuf)) { > - zilog_error("i2c_master_recv failed with %d -- " > - "keeping last read buffer\n", ret); > + zilog_error("i2c_master_recv failed with %d -- > + keeping last read buffer\n", ret); > } else { > rx->b[0] = keybuf[3]; > rx->b[1] = keybuf[4]; > @@ -720,8 +718,8 @@ static int send_boot_data(struct IR_tx *tx) > zilog_error("unexpected IR TX init response: %02x\n", buf[0]); > return 0; > } > - zilog_notify("Zilog/Hauppauge IR blaster firmware version " > - "%d.%d.%d loaded\n", buf[1], buf[2], buf[3]); > + zilog_notify("Zilog/Hauppauge IR blaster firmware version > + %d.%d.%d loaded\n", buf[1], buf[2], buf[3]); > > return 0; > } > @@ -803,9 +801,8 @@ static int fw_load(struct IR_tx *tx) > if (!read_uint8(&data, tx_data->endp, &version)) > goto corrupt; > if (version != 1) { > - zilog_error("unsupported code set file version (%u, expected" > - "1) -- please upgrade to a newer driver", > - version); > + zilog_error("unsupported code set file version (%u, expected > + 1) -- please upgrade to a newer driver", version); > fw_unload_locked(); > ret = -EFAULT; > goto out; > @@ -990,8 +987,8 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) > ret = get_key_data(data_block, code, key); > > if (ret == -EPROTO) { > - zilog_error("failed to get data for code %u, key %u -- check " > - "lircd.conf entries\n", code, key); > + zilog_error("failed to get data for code %u, key %u -- check > + lircd.conf entries\n", code, key); > return ret; > } else if (ret != 0) > return ret; > @@ -1066,12 +1063,12 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) > ret = i2c_master_send(tx->c, buf, 1); > if (ret == 1) > break; > - dprintk("NAK expected: i2c_master_send " > - "failed with %d (try %d)\n", ret, i+1); > + dprintk("NAK expected: i2c_master_send > + failed with %d (try %d)\n", ret, i+1); > } > if (ret != 1) { > - zilog_error("IR TX chip never got ready: last i2c_master_send " > - "failed with %d\n", ret); > + zilog_error("IR TX chip never got ready: last i2c_master_send > + failed with %d\n", ret); > return ret < 0 ? ret : -EFAULT; > } > > @@ -1173,12 +1170,12 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n, > */ > if (ret != 0) { > /* Looks like the chip crashed, reset it */ > - zilog_error("sending to the IR transmitter chip " > - "failed, trying reset\n"); > + zilog_error("sending to the IR transmitter chip > + failed, trying reset\n"); > > if (failures >= 3) { > - zilog_error("unable to send to the IR chip " > - "after 3 resets, giving up\n"); > + zilog_error("unable to send to the IR chip > + after 3 resets, giving up\n"); > mutex_unlock(&ir->ir_lock); > mutex_unlock(&tx->client_lock); > put_ir_tx(tx, false); > @@ -1547,8 +1544,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) > > /* Proceed only if the Rx client is also ready or not needed */ > if (rx == NULL && !tx_only) { > - zilog_info("probe of IR Tx on %s (i2c-%d) done. Waiting" > - " on IR Rx.\n", adap->name, adap->nr); > + zilog_info("probe of IR Tx on %s (i2c-%d) done. Waiting > + on IR Rx.\n", adap->name, adap->nr); > goto out_ok; > } > } else { > @@ -1586,8 +1583,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) > "zilog-rx-i2c-%d", adap->nr); > if (IS_ERR(rx->task)) { > ret = PTR_ERR(rx->task); > - zilog_error("%s: could not start IR Rx polling thread" > - "\n", __func__); > + zilog_error("%s: could not start IR Rx polling thread > + \n", __func__); > /* Failed kthread, so put back the ir ref */ > put_ir_device(ir, true); > /* Failure exit, so put back rx ref from i2c_client */ > @@ -1599,8 +1596,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) > > /* Proceed only if the Tx client is also ready */ > if (tx == NULL) { > - zilog_info("probe of IR Rx on %s (i2c-%d) done. Waiting" > - " on IR Tx.\n", adap->name, adap->nr); > + zilog_info("probe of IR Rx on %s (i2c-%d) done. Waiting > + on IR Tx.\n", adap->name, adap->nr); > goto out_ok; > } > } > @@ -1674,9 +1671,9 @@ module_init(zilog_init); > module_exit(zilog_exit); > > MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)"); > -MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, " > - "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver, " > - "Andy Walls"); > +MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, > + Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver, > + Andy Walls"); > MODULE_LICENSE("GPL"); > /* for compat with old name, which isn't all that accurate anymore */ > MODULE_ALIAS("lirc_pvr150"); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/