Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 8 Feb 2001 16:04:09 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 8 Feb 2001 16:04:00 -0500 Received: from nn.net.uni-c.dk ([130.226.0.34]:34310 "HELO nn.net.uni-c.dk") by vger.kernel.org with SMTP id ; Thu, 8 Feb 2001 16:03:44 -0500 Date: Thu, 8 Feb 2001 22:03:42 +0100 From: torben fjerdingstad To: linux-kernel@vger.kernel.org Subject: No sound on SB line2 anymore? Message-ID: <20010208220341.A21133@tfj.rnd.uni-c.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Since 2.4.0-test5, line2 on my Soundblaster 128 soundcard, which is connected to on my hauppauge winTV/pci TV card has been silent. I sure have turned line2 on with a mixer program. The external line connector sounds OK. lspci says: 00:0a.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) 00:0b.0 Multimedia video controller: Brooktree Corporation Bt848 TV with DMA push (rev 11) Since linux-2.4.0-test5 (which worked), I have tried the following kernel versions: linux-2.4.0-prerelease linux-2.4.0-ac12 linux-2.4.1-ac6 dmesg says: i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module Linux video capture interface: v1.00 bttv: driver version 0.7.50 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Bt8xx card found (0). bttv0: Bt848 (rev 17) at 00:0b.0, irq: 10, latency: 32, memory: 0xdd000000 bttv0: model: BT848( *** UNKNOWN *** ) [autodetected] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x61 bttv0: i2c attach [Temic PAL] i2c-core.o: client [Temic PAL] registered to adapter [bt848 #0](pos. 0). es1370: version v0.34 time 21:31:10 Feb 8 2001 es1370: found adapter at io 0xa800 irq 5 es1370: features: joystick off, line in, mic impedance 0 Currently I'm using xawtv: This is xawtv-3.30, running on Linux/i686 (2.4.1-ac6) In .xawtv I have: mixer = line2 It seems to both aumix and xawtv that there is a mixer there, but no sound comes out, even when line2 is on, and volume=100%. Otherwise the sound card works fine. What's up? -- Med venlig hilsen / Regards Netdriftgruppen / Network Management Group UNI-C Tlf./Phone +45 35 87 89 41 Mail: UNI-C Fax. +45 35 87 89 90 Bygning 304 E-mail: torben.fjerdingstad@uni-c.dk DK-2800 Lyngby - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/