Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755488AbaJHI57 (ORCPT ); Wed, 8 Oct 2014 04:57:59 -0400 Received: from mail-pd0-f172.google.com ([209.85.192.172]:47662 "EHLO mail-pd0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754764AbaJHIzm (ORCPT ); Wed, 8 Oct 2014 04:55:42 -0400 Date: Wed, 8 Oct 2014 17:55:34 +0900 From: Gyungoh Yoo To: Jingoo Han Cc: "'Bryan Wu'" , "'Lee Jones'" , "'Jean-Christophe Plagniol-Villard'" , "'Tomi Valkeinen'" , "'Grant Likely'" , "'Rob Herring'" , linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, devicetree@vger.kernel.org, "'Gyungoh Yoo '" Subject: Re: [RESUBMIT PATCH v3 2/8] backlight: Add support Skyworks SKY81452 backlight driver Message-ID: <20141008085534.GB3362@jack-ThinkPad-T520> References: <1412657745-7812-1-git-send-email-jack.yoo@skyworksinc.com> <1412658075-7929-1-git-send-email-jack.yoo@skyworksinc.com> <008e01cfe293$bcd6fe30$3684fa90$%han@samsung.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <008e01cfe293$bcd6fe30$3684fa90$%han@samsung.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Oct 08, 2014 at 10:03:57AM +0900, Jingoo Han wrote: > On Tuesday, October 07, 2014 2:01 PM, Gyungoh Yoo wrote: > > > > If possible, please add more detailed commit message for this patch. > > > Signed-off-by: Gyungoh Yoo > > --- > > drivers/video/backlight/Kconfig | 10 + > > drivers/video/backlight/Makefile | 1 + > > drivers/video/backlight/sky81452-backlight.c | 347 +++++++++++++++++++++++++++ > > 3 files changed, 358 insertions(+) > > create mode 100644 drivers/video/backlight/sky81452-backlight.c > > > > diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig > > index 8d03924..2586fdd 100644 > > --- a/drivers/video/backlight/Kconfig > > +++ b/drivers/video/backlight/Kconfig > > @@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA > > If you have a Pandora console, say Y to enable the > > backlight driver. > > > > +config BACKLIGHT_SKY81452 > > + tristate "Backlight driver for SKY81452" > > + depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452 > > + help > > + If you have a Skyworks SKY81452, say Y to enable the > > + backlight driver. > > + > > + To compile this driver as a module, choose M here: the module will > > + be called sky81452-backlight > > + > > config BACKLIGHT_TPS65217 > > tristate "TPS65217 Backlight" > > depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217 > > diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile > > index fcd50b73..d67073f 100644 > > --- a/drivers/video/backlight/Makefile > > +++ b/drivers/video/backlight/Makefile > > @@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o > > obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o > > obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o > > obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o > > +obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o > > obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o > > obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o > > obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o > > diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452- > > backlight.c > > new file mode 100644 > > index 0000000..101399d > > --- /dev/null > > +++ b/drivers/video/backlight/sky81452-backlight.c > > @@ -0,0 +1,347 @@ > > +/* > > + * sky81452-backlight.c SKY81452 backlight driver > > + * > > + * Copyright 2014 Skyworks Solutions Inc. > > + * Author : Gyungoh Yoo > > + * > > + * This program is free software; you can redistribute it and/or modify it > > + * under the terms of the GNU General Public License as published by the > > + * Free Software Foundation; either version 2, or (at your option) any > > + * later version. > > + * > > + * This program is distributed in the hope that it will be useful, but > > + * WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License along > > + * with this program; if not, see . > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > Please, re-order these headers alphabetically. > It enhances the readability. I see. > > > + > > +/* registers */ > > +#define SKY81452_REG0 0x00 > > +#define SKY81452_REG1 0x01 > > +#define SKY81452_REG2 0x02 > > +#define SKY81452_REG4 0x04 > > +#define SKY81452_REG5 0x05 > > + > > +/* bit mask */ > > +#define SKY81452_CS 0xFF > > +#define SKY81452_EN 0x3F > > +#define SKY81452_IGPW 0x20 > > +#define SKY81452_PWMMD 0x10 > > +#define SKY81452_PHASE 0x08 > > +#define SKY81452_ILIM 0x04 > > +#define SKY81452_VSHRT 0x03 > > +#define SKY81452_OCP 0x80 > > +#define SKY81452_OTMP 0x40 > > +#define SKY81452_SHRT 0x3F > > +#define SKY81452_OPN 0x3F > > + > > +#define SKY81452_DEFAULT_NAME "lcd-backlight" > > +#define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1) > > + > > +#define CTZ(b) __builtin_ctz(b) > > + > > +static int sky81452_bl_update_status(struct backlight_device *bd) > > +{ > > + const struct sky81452_bl_platform_data *pdata = > > + dev_get_platdata(bd->dev.parent); > > + const unsigned int brightness = (unsigned int)bd->props.brightness; > > + struct regmap *regmap = bl_get_data(bd); > > + int ret; > > + > > + if (brightness > 0) { > > + ret = regmap_write(regmap, SKY81452_REG0, brightness - 1); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, > > + pdata->enable << CTZ(SKY81452_EN)); > > + } > > + > > + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0); > > +} > > + > > +static int sky81452_bl_get_brightness(struct backlight_device *bd) > > +{ > > + return bd->props.brightness; > > +} > > + > > +static const struct backlight_ops sky81452_bl_ops = { > > + .update_status = sky81452_bl_update_status, > > + .get_brightness = sky81452_bl_get_brightness, > > +}; > > + > > +static ssize_t sky81452_bl_store_enable(struct device *dev, > > + struct device_attribute *attr, const char *buf, size_t count) > > +{ > > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > > + unsigned long value; > > + int ret; > > + > > + ret = kstrtoul(buf, 16, &value); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, > > + value << CTZ(SKY81452_EN)); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + return count; > > +} > > + > > +static ssize_t sky81452_bl_show_open_short(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > > + unsigned int reg, value = 0; > > + char tmp[3]; > > + int i, ret; > > + > > + reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4; > > + ret = regmap_read(regmap, reg, &value); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + if (value & SKY81452_SHRT) { > > + *buf = 0; > > + for (i = 0; i < 6; i++) { > > + if (value & 0x01) { > > + sprintf(tmp, "%d ", i + 1); > > + strcat(buf, tmp); > > + } > > + value >>= 1; > > + } > > + strcat(buf, "\n"); > > + } else > > + strcpy(buf, "none\n"); > > Please add braces to 'else' statement. > > If only one branch of a conditional statement is a single > statement. Braces are needed. > > if () { > ... (multi lines) > } else { > ... > } I see. > > > > + > > + return strlen(buf); > > +} > > + > > +static ssize_t sky81452_bl_show_fault(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); > > + unsigned int value = 0; > > + int ret; > > + > > + ret = regmap_read(regmap, SKY81452_REG4, &value); > > + if (IS_ERR_VALUE(ret)) > > + return ret; > > + > > + *buf = 0; > > + > > + if (value & SKY81452_OCP) > > + strcat(buf, "over-current "); > > + > > + if (value & SKY81452_OTMP) > > + strcat(buf, "over-temperature"); > > + > > + strcat(buf, "\n"); > > + return strlen(buf); > > +} > > + > > +static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable); > > +static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL); > > +static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL); > > +static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL); > > + > > +static struct attribute *sky81452_bl_attribute[] = { > > + &dev_attr_enable.attr, > > + &dev_attr_open.attr, > > + &dev_attr_short.attr, > > + &dev_attr_fault.attr, > > + NULL > > +}; > > + > > +static const struct attribute_group sky81452_bl_attr_group = { > > + .attrs = sky81452_bl_attribute, > > +}; > > + > > +#ifdef CONFIG_OF > > +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( > > + struct device *dev) > > +{ > > + struct device_node *np = of_node_get(dev->of_node); > > + struct sky81452_bl_platform_data *pdata; > > + int ret; > > + > > + if (!np) { > > + dev_err(dev, "backlight node not found"); > > + return ERR_PTR(-ENODATA); > > + } > > + > > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); > > + if (!pdata) { > > + of_node_put(np); > > + return ERR_PTR(-ENOMEM); > > + } > > + > > + of_property_read_string(np, "name", &pdata->name); > > + pdata->ignore_pwm = of_property_read_bool(np, "ignore-pwm"); > > + pdata->dpwm_mode = of_property_read_bool(np, "dpwm-mode"); > > + pdata->phase_shift = of_property_read_bool(np, "phase-shift"); > > + > > + pdata->gpio_enable = of_get_named_gpio(np, "gpio-enable", 0); > > + if (IS_ERR_VALUE(pdata->gpio_enable)) > > + pdata->gpio_enable = -1; > > + > > + ret = of_property_read_u32(np, "enable", &pdata->enable); > > + if (IS_ERR_VALUE(ret)) > > + pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN); > > + > > + ret = of_property_read_u32(np, "short-detection-threshold", > > + &pdata->short_detection_threshold); > > + if (IS_ERR_VALUE(ret)) > > + pdata->short_detection_threshold = 7; > > + > > + ret = of_property_read_u32(np, "boost-current-limit", > > + &pdata->boost_current_limit); > > + if (IS_ERR_VALUE(ret)) > > + pdata->boost_current_limit = 2750; > > + > > + of_node_put(np); > > + return pdata; > > +} > > +#else > > +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( > > + struct device *dev) > > +{ > > + return ERR_PTR(-EINVAL); > > +} > > +#endif > > + > > +static int sky81452_bl_init_device(struct regmap *regmap, > > + struct sky81452_bl_platform_data *pdata) > > +{ > > + unsigned int value; > > + > > + value = pdata->ignore_pwm ? SKY81452_IGPW : 0; > > + value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0; > > + value |= pdata->phase_shift ? 0 : SKY81452_PHASE; > > + > > + if (pdata->boost_current_limit == 2300) > > + value |= SKY81452_ILIM; > > + else if (pdata->boost_current_limit != 2720) > > + return -EINVAL; > > + > > + if (pdata->short_detection_threshold < 4 || > > + pdata->short_detection_threshold > 7) > > + return -EINVAL; > > + value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT); > > + > > + return regmap_write(regmap, SKY81452_REG2, value); > > +} > > + > > +static int sky81452_bl_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct regmap *regmap = dev_get_drvdata(dev->parent); > > + struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev); > > + struct backlight_device *bd; > > + struct backlight_properties props; > > + const char *name; > > + int ret; > > + > > + if (!pdata) { > > + pdata = sky81452_bl_parse_dt(dev); > > + if (IS_ERR(pdata)) > > + return PTR_ERR(pdata); > > + } > > + > > + if (pdata->gpio_enable >= 0) { > > + ret = devm_gpio_request_one(dev, pdata->gpio_enable, > > + GPIOF_OUT_INIT_HIGH, "sky81452-en"); > > + if (IS_ERR_VALUE(ret)) { > > + dev_err(dev, "failed to request GPIO. err=%d", ret); > > + return ret; > > + } > > + } > > + > > + ret = sky81452_bl_init_device(regmap, pdata); > > + if (IS_ERR_VALUE(ret)) { > > + dev_err(dev, "failed to initialize. err=%d", ret); > > + return ret; > > + } > > + > > + memset(&props, 0, sizeof(props)); > > + props.max_brightness = SKY81452_MAX_BRIGHTNESS, > > + name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME; > > + bd = devm_backlight_device_register(dev, name, dev, regmap, > > + &sky81452_bl_ops, &props); > > + if (IS_ERR(bd)) { > > + dev_err(dev, "failed to register. err=%ld", PTR_ERR(bd)); > > + return PTR_ERR(bd); > > + } > > + > > + platform_set_drvdata(pdev, bd); > > + > > + ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); > > + if (IS_ERR_VALUE(ret)) { > > + dev_err(dev, "failed to create attribute. err=%d", ret); > > + goto err; > > + } > > + > > + return ret; > > +err: > > + backlight_device_unregister(bd); > > This backlight_device_unregister() is NOT necessary. > This is because backlight_device_unregister will be called > automatically, when devm_backlight_device_register() is used > and error returns. I see. > > > + return ret; > > +} > > + > > +static int sky81452_bl_remove(struct platform_device *pdev) > > +{ > > + const struct sky81452_bl_platform_data *pdata = > > + dev_get_platdata(&pdev->dev); > > + struct backlight_device *bd = platform_get_drvdata(pdev); > > + > > + sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group); > > + > > + bd->props.power = FB_BLANK_UNBLANK; > > + bd->props.brightness = 0; > > + backlight_update_status(bd); > > + > > + if (pdata->gpio_enable >= 0) > > + gpio_set_value_cansleep(pdata->gpio_enable, 0); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_OF > > +static const struct of_device_id sky81452_bl_of_match[] = { > > + { .compatible = "skyworks,sky81452-backlight", }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, sky81452_bl_of_match); > > +#endif > > + > > +static struct platform_driver sky81452_bl_driver = { > > + .driver = { > > + .name = "sky81452-backlight", > > + .of_match_table = of_match_ptr(sky81452_bl_of_match), > > + }, > > + .probe = sky81452_bl_probe, > > + .remove = sky81452_bl_remove, > > +}; > > + > > +module_platform_driver(sky81452_bl_driver); > > + > > +MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver"); > > +MODULE_AUTHOR("Gyungoh Yoo "); > > +MODULE_LICENSE("GPL"); > > How about using 'GPL v2'? I will change it. Thanks you so much for your review. > > > +MODULE_VERSION("1.2"); > > -- > > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/