Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751415AbaJIKBH (ORCPT ); Thu, 9 Oct 2014 06:01:07 -0400 Received: from rtits2.realtek.com ([60.250.210.242]:47397 "EHLO rtits2.realtek.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754919AbaJIKAq (ORCPT ); Thu, 9 Oct 2014 06:00:46 -0400 Authenticated-By: X-SpamFilter-By: BOX Solutions SpamTrap 5.49 with qID s99A0gM2028871, This message is accepted by code: ctloc85258 From: Hayes Wang To: CC: , , , Hayes Wang Subject: [PATCH net-next v2 3/3] r8152: add mutex for hw settings Date: Thu, 9 Oct 2014 18:00:26 +0800 Message-ID: <1394712342-15778-63-Taiwan-albertk@realtek.com> X-Mailer: Microsoft Office Outlook 11 In-Reply-To: <1394712342-15778-60-Taiwan-albertk@realtek.com> References: <1394712342-15778-58-Taiwan-albertk@realtek.com> <1394712342-15778-60-Taiwan-albertk@realtek.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [172.21.71.44] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Use the mutex to avoid the settings are interrupted by other ones. Signed-off-by: Hayes Wang --- drivers/net/usb/r8152.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 63 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 1d2fc8e..864159e 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -26,7 +26,7 @@ #include /* Version Information */ -#define DRIVER_VERSION "v1.06.1 (2014/10/01)" +#define DRIVER_VERSION "v1.07.0 (2014/10/09)" #define DRIVER_AUTHOR "Realtek linux nic maintainers " #define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters" #define MODULENAME "r8152" @@ -566,6 +566,7 @@ struct r8152 { spinlock_t rx_lock, tx_lock; struct delayed_work schedule; struct mii_if_info mii; + struct mutex control; /* use for hw setting */ struct rtl_ops { void (*init)(struct r8152 *); @@ -977,12 +978,16 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p) if (ret < 0) goto out1; + mutex_lock(&tp->control); + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data); ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); out1: return ret; @@ -2139,6 +2144,8 @@ static int rtl8152_set_features(struct net_device *dev, if (ret < 0) goto out; + mutex_lock(&tp->control); + if (changed & NETIF_F_HW_VLAN_CTAG_RX) { if (features & NETIF_F_HW_VLAN_CTAG_RX) rtl_rx_vlan_en(tp, true); @@ -2146,6 +2153,8 @@ static int rtl8152_set_features(struct net_device *dev, rtl_rx_vlan_en(tp, false); } + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); out: @@ -2847,6 +2856,11 @@ static void rtl_work_func_t(struct work_struct *work) if (test_bit(RTL8152_UNPLUG, &tp->flags)) goto out1; + if (!mutex_trylock(&tp->control)) { + schedule_delayed_work(&tp->schedule, 0); + goto out1; + } + if (test_bit(RTL8152_LINK_CHG, &tp->flags)) set_carrier(tp); @@ -2862,6 +2876,8 @@ static void rtl_work_func_t(struct work_struct *work) if (test_bit(PHY_RESET, &tp->flags)) rtl_phy_reset(tp); + mutex_unlock(&tp->control); + out1: usb_autopm_put_interface(tp->intf); } @@ -2881,6 +2897,8 @@ static int rtl8152_open(struct net_device *netdev) goto out; } + mutex_lock(&tp->control); + /* The WORK_ENABLE may be set when autoresume occurs */ if (test_bit(WORK_ENABLE, &tp->flags)) { clear_bit(WORK_ENABLE, &tp->flags); @@ -2909,6 +2927,8 @@ static int rtl8152_open(struct net_device *netdev) free_all_mem(tp); } + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); out: @@ -2929,6 +2949,8 @@ static int rtl8152_close(struct net_device *netdev) if (res < 0) { rtl_drop_queued_tx(tp); } else { + mutex_lock(&tp->control); + /* The autosuspend may have been enabled and wouldn't * be disable when autoresume occurs, because the * netif_running() would be false. @@ -2941,6 +2963,9 @@ static int rtl8152_close(struct net_device *netdev) tasklet_disable(&tp->tl); tp->rtl_ops.down(tp); tasklet_enable(&tp->tl); + + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); } @@ -3165,6 +3190,8 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) { struct r8152 *tp = usb_get_intfdata(intf); + mutex_lock(&tp->control); + if (PMSG_IS_AUTO(message)) set_bit(SELECTIVE_SUSPEND, &tp->flags); else @@ -3184,6 +3211,8 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) tasklet_enable(&tp->tl); } + mutex_unlock(&tp->control); + return 0; } @@ -3191,6 +3220,8 @@ static int rtl8152_resume(struct usb_interface *intf) { struct r8152 *tp = usb_get_intfdata(intf); + mutex_lock(&tp->control); + if (!test_bit(SELECTIVE_SUSPEND, &tp->flags)) { tp->rtl_ops.init(tp); netif_device_attach(tp->netdev); @@ -3216,6 +3247,8 @@ static int rtl8152_resume(struct usb_interface *intf) usb_submit_urb(tp->intr_urb, GFP_KERNEL); } + mutex_unlock(&tp->control); + return 0; } @@ -3226,9 +3259,13 @@ static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) if (usb_autopm_get_interface(tp->intf) < 0) return; + mutex_lock(&tp->control); + wol->supported = WAKE_ANY; wol->wolopts = __rtl_get_wol(tp); + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); } @@ -3241,9 +3278,13 @@ static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) if (ret < 0) goto out_set_wol; + mutex_lock(&tp->control); + __rtl_set_wol(tp, wol->wolopts); tp->saved_wolopts = wol->wolopts & WAKE_ANY; + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); out_set_wol: @@ -3287,8 +3328,12 @@ int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) if (ret < 0) goto out; + mutex_lock(&tp->control); + ret = mii_ethtool_gset(&tp->mii, cmd); + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); out: @@ -3304,8 +3349,12 @@ static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) if (ret < 0) goto out; + mutex_lock(&tp->control); + ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex); + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); out: @@ -3465,8 +3514,12 @@ rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata) if (ret < 0) goto out; + mutex_lock(&tp->control); + ret = tp->rtl_ops.eee_get(tp, edata); + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); out: @@ -3483,10 +3536,14 @@ rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata) if (ret < 0) goto out; + mutex_lock(&tp->control); + ret = tp->rtl_ops.eee_set(tp, edata); if (!ret) ret = mii_nway_restart(&tp->mii); + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); out: @@ -3528,7 +3585,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) break; case SIOCGMIIREG: + mutex_lock(&tp->control); data->val_out = r8152_mdio_read(tp, data->reg_num); + mutex_unlock(&tp->control); break; case SIOCSMIIREG: @@ -3536,7 +3595,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) res = -EPERM; break; } + mutex_lock(&tp->control); r8152_mdio_write(tp, data->reg_num, data->val_in); + mutex_unlock(&tp->control); break; default: @@ -3729,6 +3790,7 @@ static int rtl8152_probe(struct usb_interface *intf, goto out; tasklet_init(&tp->tl, bottom_half, (unsigned long)tp); + mutex_init(&tp->control); INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); netdev->netdev_ops = &rtl8152_netdev_ops; -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/