Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 8 Dec 2002 02:44:02 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 8 Dec 2002 02:44:02 -0500 Received: from gateway-1237.mvista.com ([12.44.186.158]:9213 "EHLO av.mvista.com") by vger.kernel.org with ESMTP id ; Sun, 8 Dec 2002 02:42:05 -0500 Message-ID: <3DF2F965.59D7CD84@mvista.com> Date: Sat, 07 Dec 2002 23:48:53 -0800 From: george anzinger Organization: Monta Vista Software X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12-20b i686) X-Accept-Language: en MIME-Version: 1.0 To: Linus Torvalds , "linux-kernel@vger.kernel.org" Subject: [PATCH 3/3] High-res-timers part 3 (posix to hrposix) take 20 References: <3DB9A314.6CECA1AC@mvista.com> Content-Type: multipart/mixed; boundary="------------E19E190DBD0FE11DBFEFDE6C" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 68724 Lines: 2363 This is a multi-part message in MIME format. --------------E19E190DBD0FE11DBFEFDE6C Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit And this finishs the high res timers code. I had to add arg3 to the restart_block to handle the two word restart time... This patch adds the two POSIX clocks CLOCK_REALTIME_HR and CLOCK_MONOTONIC_HR to the posix clocks & timers package. A small change is made in sched.h and the rest of the patch is against .../kernel/posix_timers.c and .../include/linux/posix_timers.h This patch takes advantage of the timer storm protection features of the POSIX clock and timers patch. This patch fixes the high resolution timer resolution at 1 micro second. Should this number be a CONFIG option? I think it would be a "good thing" to move the NTP stuff to the jiffies clock. This would allow the wall clock/ jiffies clock difference to be a "fixed value" so that code that needed this would not have to read two clocks. Setting the wall clock would then just be an adjustment to this "fixed value". It would also eliminate the problem of asking for a wall clock offset and getting a jiffies clock offset. This issue is what causes the current 2.5.46 system to fail the simple: time sleep 60 test (any value less than 60 seconds violates the standard in that it implies a timer expired early). Patch is against 2.5.50-bk7 These patches as well as the POSIX clocks & timers patch are available on the project site: http://sourceforge.net/projects/high-res-timers/ The 3 parts to the high res timers are: core The core kernel (i.e. platform independent) i386 The high-res changes for the i386 (x86) platform *hrposix The changes to the POSIX clocks & timers patch to use high-res timers Please apply. -- George Anzinger george@mvista.com High-res-timers: http://sourceforge.net/projects/high-res-timers/ Preemption patch: http://www.kernel.org/pub/linux/kernel/people/rml --------------E19E190DBD0FE11DBFEFDE6C Content-Type: text/plain; charset=us-ascii; name="hrtimers-posix-2.5.50-bk7-1.0.patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="hrtimers-posix-2.5.50-bk7-1.0.patch" diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/arch/i386/kernel/entry.S linux/arch/i386/kernel/entry.S --- linux-2.5.50-bk7-kb/arch/i386/kernel/entry.S Sat Dec 7 21:37:19 2002 +++ linux/arch/i386/kernel/entry.S Sat Dec 7 21:39:44 2002 @@ -41,7 +41,6 @@ */ #include -#include #include #include #include @@ -239,7 +238,7 @@ pushl %eax # save orig_eax SAVE_ALL GET_THREAD_INFO(%ebx) - cmpl $(NR_syscalls), %eax + cmpl $(nr_syscalls), %eax jae syscall_badsys # system call tracing in operation testb $_TIF_SYSCALL_TRACE,TI_FLAGS(%ebx) @@ -315,7 +314,7 @@ xorl %edx,%edx call do_syscall_trace movl ORIG_EAX(%esp), %eax - cmpl $(NR_syscalls), %eax + cmpl $(nr_syscalls), %eax jnae syscall_call jmp syscall_exit @@ -769,8 +768,15 @@ .long sys_epoll_wait .long sys_remap_file_pages .long sys_set_tid_address - - - .rept NR_syscalls-(.-sys_call_table)/4 - .long sys_ni_syscall - .endr + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + + +nr_syscalls=(.-sys_call_table)/4 diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/arch/i386/kernel/time.c linux/arch/i386/kernel/time.c --- linux-2.5.50-bk7-kb/arch/i386/kernel/time.c Tue Nov 12 12:39:37 2002 +++ linux/arch/i386/kernel/time.c Sat Dec 7 21:37:58 2002 @@ -132,6 +132,7 @@ time_maxerror = NTP_PHASE_LIMIT; time_esterror = NTP_PHASE_LIMIT; write_unlock_irq(&xtime_lock); + clock_was_set(); } /* diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/fs/exec.c linux/fs/exec.c --- linux-2.5.50-bk7-kb/fs/exec.c Sat Dec 7 21:36:37 2002 +++ linux/fs/exec.c Sat Dec 7 21:37:58 2002 @@ -779,6 +779,7 @@ flush_signal_handlers(current); flush_old_files(current->files); + exit_itimers(current); return 0; diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/asm-generic/siginfo.h linux/include/asm-generic/siginfo.h --- linux-2.5.50-bk7-kb/include/asm-generic/siginfo.h Wed Oct 30 22:45:08 2002 +++ linux/include/asm-generic/siginfo.h Sat Dec 7 21:37:58 2002 @@ -43,8 +43,11 @@ /* POSIX.1b timers */ struct { - unsigned int _timer1; - unsigned int _timer2; + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)]; + sigval_t _sigval; /* same as below */ + int _sys_private; /* not to be passed to user */ } _timer; /* POSIX.1b signals */ @@ -86,8 +89,9 @@ */ #define si_pid _sifields._kill._pid #define si_uid _sifields._kill._uid -#define si_timer1 _sifields._timer._timer1 -#define si_timer2 _sifields._timer._timer2 +#define si_tid _sifields._timer._tid +#define si_overrun _sifields._timer._overrun +#define si_sys_private _sifields._timer._sys_private #define si_status _sifields._sigchld._status #define si_utime _sifields._sigchld._utime #define si_stime _sifields._sigchld._stime @@ -221,6 +225,7 @@ #define SIGEV_SIGNAL 0 /* notify via signal */ #define SIGEV_NONE 1 /* other notification: meaningless */ #define SIGEV_THREAD 2 /* deliver via thread creation */ +#define SIGEV_THREAD_ID 4 /* deliver to thread */ #define SIGEV_MAX_SIZE 64 #ifndef SIGEV_PAD_SIZE @@ -235,6 +240,7 @@ int sigev_notify; union { int _pad[SIGEV_PAD_SIZE]; + int _tid; struct { void (*_function)(sigval_t); @@ -247,10 +253,12 @@ #define sigev_notify_function _sigev_un._sigev_thread._function #define sigev_notify_attributes _sigev_un._sigev_thread._attribute +#define sigev_notify_thread_id _sigev_un._tid #ifdef __KERNEL__ struct siginfo; +void do_schedule_next_timer(struct siginfo *info); #ifndef HAVE_ARCH_COPY_SIGINFO diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/asm-i386/posix_types.h linux/include/asm-i386/posix_types.h --- linux-2.5.50-bk7-kb/include/asm-i386/posix_types.h Mon Sep 9 10:35:18 2002 +++ linux/include/asm-i386/posix_types.h Sat Dec 7 21:37:58 2002 @@ -22,6 +22,8 @@ typedef long __kernel_time_t; typedef long __kernel_suseconds_t; typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; typedef int __kernel_daddr_t; typedef char * __kernel_caddr_t; typedef unsigned short __kernel_uid16_t; diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/asm-i386/signal.h linux/include/asm-i386/signal.h --- linux-2.5.50-bk7-kb/include/asm-i386/signal.h Sat Dec 7 21:36:41 2002 +++ linux/include/asm-i386/signal.h Sat Dec 7 21:37:58 2002 @@ -3,6 +3,7 @@ #include #include +#include /* Avoid too many header ordering problems. */ struct siginfo; diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/asm-i386/unistd.h linux/include/asm-i386/unistd.h --- linux-2.5.50-bk7-kb/include/asm-i386/unistd.h Sat Dec 7 21:36:41 2002 +++ linux/include/asm-i386/unistd.h Sat Dec 7 21:40:52 2002 @@ -264,6 +264,15 @@ #define __NR_sys_epoll_wait 256 #define __NR_remap_file_pages 257 #define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) /* user-visible error numbers are in the range -1 - -124: see */ diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/linux/id_reuse.h linux/include/linux/id_reuse.h --- linux-2.5.50-bk7-kb/include/linux/id_reuse.h Wed Dec 31 16:00:00 1969 +++ linux/include/linux/id_reuse.h Sat Dec 7 21:37:58 2002 @@ -0,0 +1,119 @@ +/* + * include/linux/id.h + * + * 2002-10-18 written by Jim Houston jim.houston@ccur.com + * Copyright (C) 2002 by Concurrent Computer Corporation + * Distributed under the GNU GPL license version 2. + * + * Small id to pointer translation service avoiding fixed sized + * tables. + */ + +#define IDR_BITS 5 +#define IDR_MASK ((1 << IDR_BITS)-1) +#define IDR_FULL ((int)((1ULL << (1 << IDR_BITS))-1)) + +/* Number of id_layer structs to leave in free list */ +#define IDR_FREE_MAX 6 + +struct idr_layer { + unsigned long bitmap; + struct idr_layer *ary[1<ary[bit] && p->ary[bit]->bitmap == IDR_FULL) + __set_bit(bit, &p->bitmap); + else + __clear_bit(bit, &p->bitmap); +} + +extern inline void update_bitmap_set(struct idr_layer *p, int bit) +{ + if (p->ary[bit] && p->ary[bit]->bitmap == IDR_FULL) + __set_bit(bit, &p->bitmap); +} + +extern inline void update_bitmap_clear(struct idr_layer *p, int bit) +{ + if (p->ary[bit] && p->ary[bit]->bitmap == IDR_FULL) + ; + else + __clear_bit(bit, &p->bitmap); +} + +extern inline void idr_lock(struct idr *idp) +{ + spin_lock(&idp->id_slock); +} + +extern inline void idr_unlock(struct idr *idp) +{ + spin_unlock(&idp->id_slock); +} + +extern inline void *idr_find(struct idr *idp, int id) +{ + int n; + struct idr_layer *p; + + id--; + idr_lock(idp); + n = idp->layers * IDR_BITS; + p = idp->top; + if ((unsigned)id >= (1 << n)) { // unsigned catches <=0 input + idr_unlock(idp); + return(NULL); + } + + while (n > 0 && p) { + n -= IDR_BITS; + p = p->ary[(id >> n) & IDR_MASK]; + } + idr_unlock(idp); + return((void *)p); +} +/* + * caller calls idr_lock/ unlock around this one. Allows + * additional code to be protected. + */ +extern inline void *idr_find_nolock(struct idr *idp, int id) +{ + int n; + struct idr_layer *p; + + id--; + n = idp->layers * IDR_BITS; + p = idp->top; + if ((unsigned)id >= (1 << n)) { // unsigned catches <=0 input + return(NULL); + } + + while (n > 0 && p) { + n -= IDR_BITS; + p = p->ary[(id >> n) & IDR_MASK]; + } + return((void *)p); +} + + + +extern kmem_cache_t *idr_layer_cache; + diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/linux/init_task.h linux/include/linux/init_task.h --- linux-2.5.50-bk7-kb/include/linux/init_task.h Thu Oct 3 10:42:11 2002 +++ linux/include/linux/init_task.h Sat Dec 7 21:37:58 2002 @@ -93,6 +93,7 @@ .sig = &init_signals, \ .pending = { NULL, &tsk.pending.head, {{0}}}, \ .blocked = {{0}}, \ + .posix_timers = LIST_HEAD_INIT(tsk.posix_timers), \ .alloc_lock = SPIN_LOCK_UNLOCKED, \ .switch_lock = SPIN_LOCK_UNLOCKED, \ .journal_info = NULL, \ diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/linux/posix-timers.h linux/include/linux/posix-timers.h --- linux-2.5.50-bk7-kb/include/linux/posix-timers.h Wed Dec 31 16:00:00 1969 +++ linux/include/linux/posix-timers.h Sat Dec 7 21:37:58 2002 @@ -0,0 +1,30 @@ +#ifndef _linux_POSIX_TIMERS_H +#define _linux_POSIX_TIMERS_H + +struct k_clock { + int res; /* in nano seconds */ + int (*clock_set) (struct timespec * tp); + int (*clock_get) (struct timespec * tp); + int (*nsleep) (int flags, + struct timespec * new_setting, + struct itimerspec * old_setting); + int (*timer_set) (struct k_itimer * timr, int flags, + struct itimerspec * new_setting, + struct itimerspec * old_setting); + int (*timer_del) (struct k_itimer * timr); + void (*timer_get) (struct k_itimer * timr, + struct itimerspec * cur_setting); +}; +struct now_struct { + unsigned long jiffies; +}; + +#define posix_get_now(now) (now)->jiffies = jiffies; +#define posix_time_before(timer, now) \ + time_before((timer)->expires, (now)->jiffies) + +#define posix_bump_timer(timr) do { \ + (timr)->it_timer.expires += (timr)->it_incr; \ + (timr)->it_overrun++; \ + }while (0) +#endif diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/linux/sched.h linux/include/linux/sched.h --- linux-2.5.50-bk7-kb/include/linux/sched.h Sat Dec 7 21:36:43 2002 +++ linux/include/linux/sched.h Sat Dec 7 21:37:58 2002 @@ -276,6 +276,25 @@ typedef struct prio_array prio_array_t; struct backing_dev_info; +/* POSIX.1b interval timer structure. */ +struct k_itimer { + struct list_head list; /* free/ allocate list */ + spinlock_t it_lock; + clockid_t it_clock; /* which timer type */ + timer_t it_id; /* timer id */ + int it_overrun; /* overrun on pending signal */ + int it_overrun_last; /* overrun on last delivered signal */ + int it_requeue_pending; /* waiting to requeue this timer */ + int it_sigev_notify; /* notify word of sigevent struct */ + int it_sigev_signo; /* signo word of sigevent struct */ + sigval_t it_sigev_value; /* value word of sigevent struct */ + unsigned long it_incr; /* interval specified in jiffies */ + struct task_struct *it_process; /* process to send signal to */ + struct timer_list it_timer; +}; + + + struct task_struct { volatile long state; /* -1 unrunnable, 0 runnable, >0 stopped */ struct thread_info *thread_info; @@ -339,6 +358,7 @@ unsigned long it_real_value, it_prof_value, it_virt_value; unsigned long it_real_incr, it_prof_incr, it_virt_incr; struct timer_list real_timer; + struct list_head posix_timers; /* POSIX.1b Interval Timers */ unsigned long utime, stime, cutime, cstime; unsigned long start_time; /* mm fault and swap info: this can arguably be seen as either mm-specific or thread-specific */ @@ -579,6 +599,7 @@ extern void exit_files(struct task_struct *); extern void exit_sighand(struct task_struct *); extern void __exit_sighand(struct task_struct *); +extern void exit_itimers(struct task_struct *); extern void reparent_to_init(void); extern void daemonize(void); diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/linux/signal.h linux/include/linux/signal.h --- linux-2.5.50-bk7-kb/include/linux/signal.h Sat Dec 7 21:36:43 2002 +++ linux/include/linux/signal.h Sat Dec 7 21:37:58 2002 @@ -224,7 +224,7 @@ struct pt_regs; extern int get_signal_to_deliver(siginfo_t *info, struct pt_regs *regs); #endif - +#define FOLD_NANO_SLEEP_INTO_CLOCK_NANO_SLEEP #endif /* __KERNEL__ */ #endif /* _LINUX_SIGNAL_H */ diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/linux/sys.h linux/include/linux/sys.h --- linux-2.5.50-bk7-kb/include/linux/sys.h Wed Oct 30 22:46:36 2002 +++ linux/include/linux/sys.h Sat Dec 7 21:37:58 2002 @@ -2,9 +2,8 @@ #define _LINUX_SYS_H /* - * system call entry points ... but not all are defined + * This file is no longer used or needed */ -#define NR_syscalls 260 /* * These are system calls that will be removed at some time diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/linux/time.h linux/include/linux/time.h --- linux-2.5.50-bk7-kb/include/linux/time.h Sat Dec 7 21:36:43 2002 +++ linux/include/linux/time.h Sat Dec 7 21:37:58 2002 @@ -40,6 +40,19 @@ */ #define MAX_JIFFY_OFFSET ((~0UL >> 1)-1) +/* Parameters used to convert the timespec values */ +#ifndef USEC_PER_SEC +#define USEC_PER_SEC (1000000L) +#endif + +#ifndef NSEC_PER_SEC +#define NSEC_PER_SEC (1000000000L) +#endif + +#ifndef NSEC_PER_USEC +#define NSEC_PER_USEC (1000L) +#endif + static __inline__ unsigned long timespec_to_jiffies(struct timespec *value) { @@ -138,6 +151,8 @@ #ifdef __KERNEL__ extern void do_gettimeofday(struct timeval *tv); extern void do_settimeofday(struct timeval *tv); +extern int do_sys_settimeofday(struct timeval *tv, struct timezone *tz); +extern void clock_was_set(void); // call when ever the clock is set extern long do_nanosleep(struct timespec *t); extern long do_utimes(char * filename, struct timeval * times); #endif @@ -165,5 +180,25 @@ struct timeval it_interval; /* timer interval */ struct timeval it_value; /* current value */ }; + + +/* + * The IDs of the various system clocks (for POSIX.1b interval timers). + */ +#define CLOCK_REALTIME 0 +#define CLOCK_MONOTONIC 1 +#define CLOCK_PROCESS_CPUTIME_ID 2 +#define CLOCK_THREAD_CPUTIME_ID 3 +#define CLOCK_REALTIME_HR 4 +#define CLOCK_MONOTONIC_HR 5 + +#define MAX_CLOCKS 6 + +/* + * The various flags for setting POSIX.1b interval timers. + */ + +#define TIMER_ABSTIME 0x01 + #endif diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/include/linux/types.h linux/include/linux/types.h --- linux-2.5.50-bk7-kb/include/linux/types.h Tue Oct 15 15:43:06 2002 +++ linux/include/linux/types.h Sat Dec 7 21:37:58 2002 @@ -23,6 +23,8 @@ typedef __kernel_daddr_t daddr_t; typedef __kernel_key_t key_t; typedef __kernel_suseconds_t suseconds_t; +typedef __kernel_timer_t timer_t; +typedef __kernel_clockid_t clockid_t; #ifdef __KERNEL__ typedef __kernel_uid32_t uid_t; diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/kernel/Makefile linux/kernel/Makefile --- linux-2.5.50-bk7-kb/kernel/Makefile Sat Dec 7 21:36:43 2002 +++ linux/kernel/Makefile Sat Dec 7 21:37:58 2002 @@ -10,7 +10,7 @@ exit.o itimer.o time.o softirq.o resource.o \ sysctl.o capability.o ptrace.o timer.o user.o \ signal.o sys.o kmod.o workqueue.o futex.o platform.o pid.o \ - rcupdate.o intermodule.o extable.o + rcupdate.o intermodule.o extable.o posix-timers.o id_reuse.o obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o obj-$(CONFIG_SMP) += cpu.o diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/kernel/exit.c linux/kernel/exit.c --- linux-2.5.50-bk7-kb/kernel/exit.c Sat Dec 7 21:36:44 2002 +++ linux/kernel/exit.c Sat Dec 7 21:37:58 2002 @@ -411,6 +411,7 @@ mmdrop(active_mm); } + /* * Turn us into a lazy TLB process if we * aren't already.. @@ -659,6 +660,7 @@ __exit_files(tsk); __exit_fs(tsk); exit_namespace(tsk); + exit_itimers(tsk); exit_thread(); if (current->leader) diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/kernel/fork.c linux/kernel/fork.c --- linux-2.5.50-bk7-kb/kernel/fork.c Sat Dec 7 21:36:44 2002 +++ linux/kernel/fork.c Sat Dec 7 21:37:58 2002 @@ -810,6 +810,7 @@ goto bad_fork_cleanup_files; if (copy_sighand(clone_flags, p)) goto bad_fork_cleanup_fs; + INIT_LIST_HEAD(&p->posix_timers); if (copy_mm(clone_flags, p)) goto bad_fork_cleanup_sighand; if (copy_namespace(clone_flags, p)) diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/kernel/id_reuse.c linux/kernel/id_reuse.c --- linux-2.5.50-bk7-kb/kernel/id_reuse.c Wed Dec 31 16:00:00 1969 +++ linux/kernel/id_reuse.c Sat Dec 7 21:37:58 2002 @@ -0,0 +1,194 @@ +/* + * linux/kernel/id.c + * + * 2002-10-18 written by Jim Houston jim.houston@ccur.com + * Copyright (C) 2002 by Concurrent Computer Corporation + * Distributed under the GNU GPL license version 2. + * + * Small id to pointer translation service. + * + * It uses a radix tree like structure as a sparse array indexed + * by the id to obtain the pointer. The bitmap makes allocating + * an new id quick. + + * Modified by George Anzinger to reuse immediately and to use + * find bit instructions. Also removed _irq on spinlocks. + */ + + +#include +#include +#include +#include + +static kmem_cache_t *idr_layer_cache; + +/* + * Since we can't allocate memory with spinlock held and dropping the + * lock to allocate gets ugly keep a free list which will satisfy the + * worst case allocation. + + * Hm? Looks like the free list is shared with all users... I guess + * that is ok, think of it as an extension of alloc. + */ + +static struct idr_layer *id_free; +static int id_free_cnt; + +static inline struct idr_layer *alloc_layer(void) +{ + struct idr_layer *p; + + if (!(p = id_free)) + BUG(); + id_free = p->ary[0]; + id_free_cnt--; + p->ary[0] = 0; + return(p); +} + +static inline void free_layer(struct idr_layer *p) +{ + /* + * Depends on the return element being zeroed. + */ + p->ary[0] = id_free; + id_free = p; + id_free_cnt++; +} + +static int sub_alloc(struct idr_layer *p, int shift, void *ptr) +{ + int bitmap = p->bitmap; + int v, n; + + n = ffz(bitmap); + if (shift == 0) { + p->ary[n] = (struct idr_layer *)ptr; + __set_bit(n, &p->bitmap); + return(n); + } + if (!p->ary[n]) + p->ary[n] = alloc_layer(); + v = sub_alloc(p->ary[n], shift-IDR_BITS, ptr); + update_bitmap_set(p, n); + return(v + (n << shift)); +} + +int idr_get_new(struct idr *idp, void *ptr) +{ + int n, v; + + idr_lock(idp); + n = idp->layers * IDR_BITS; + /* + * Since we can't allocate memory with spinlock held and dropping the + * lock to allocate gets ugly keep a free list which will satisfy the + * worst case allocation. + */ + while (id_free_cnt < n+1) { + struct idr_layer *new; + idr_unlock(idp); + new = kmem_cache_alloc(idr_layer_cache, GFP_KERNEL); + if(new == NULL) + return (0); + memset(new, 0, sizeof(struct idr_layer)); + idr_lock(idp); + free_layer(new); + } + /* + * Add a new layer if the array is full + */ + if (idp->top->bitmap == IDR_FULL){ + struct idr_layer *new = alloc_layer(); + ++idp->layers; + n += IDR_BITS; + new->ary[0] = idp->top; + idp->top = new; + update_bitmap_set(new, 0); + } + v = sub_alloc(idp->top, n-IDR_BITS, ptr); + idp->last = v; + idp->count++; + idr_unlock(idp); + return(v+1); +} +/* + * At this time we only free leaf nodes. It would take another bitmap + * or, better, an in use counter to correctly free higher nodes. + */ + +static int sub_remove(struct idr_layer *p, int shift, int id) +{ + int n = (id >> shift) & IDR_MASK; + + if (shift != 0) { + if (sub_remove(p->ary[n], shift-IDR_BITS, id)) { + free_layer(p->ary[n]); + p->ary[n] = NULL; + } + __clear_bit(n, &p->bitmap); + return (0); // for now, prune only at 0 + } else { + p->ary[n] = NULL; + __clear_bit(n, &p->bitmap); + } + return (! p->bitmap); +} + +void idr_remove(struct idr *idp, int id) +{ + struct idr_layer *p; + + if (id <= 0) + return; + id--; + idr_lock(idp); + sub_remove(idp->top, (idp->layers-1)*IDR_BITS, id); +#if 0 + /* + * To do this correctly we really need a bit map or counter that + * indicates if any are allocated, not the current one that + * indicates if any are free. Something to do... + * This is not too bad as we do prune the leaf nodes. So for a + * three layer tree we will only be left with 33 nodes when + * empty + */ + if(idp->top->bitmap == 1 && idp->layers > 1 ){ // We can drop a layer + p = idp->top->ary[0]; + free_layer(idp->top); + idp->top = p; + --idp->layers; + } +#endif + idp->count--; + if (id_free_cnt >= IDR_FREE_MAX) { + + p = alloc_layer(); + idr_unlock(idp); + kmem_cache_free(idr_layer_cache, p); + return; + } + idr_unlock(idp); +} + +static __init int init_id_cache(void) +{ + if (!idr_layer_cache) + idr_layer_cache = kmem_cache_create("idr_layer_cache", + sizeof(struct idr_layer), 0, 0, 0, 0); + return 0; +} + +void idr_init(struct idr *idp) +{ + init_id_cache(); + idp->count = 0; + idp->last = 0; + idp->layers = 1; + idp->top = kmem_cache_alloc(idr_layer_cache, GFP_KERNEL); + memset(idp->top, 0, sizeof(struct idr_layer)); + spin_lock_init(&idp->id_slock); +} + +__initcall(init_id_cache); diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/kernel/posix-timers.c linux/kernel/posix-timers.c --- linux-2.5.50-bk7-kb/kernel/posix-timers.c Wed Dec 31 16:00:00 1969 +++ linux/kernel/posix-timers.c Sat Dec 7 23:23:34 2002 @@ -0,0 +1,1311 @@ +/* + * linux/kernel/posix_timers.c + * + * + * 2002-10-15 Posix Clocks & timers by George Anzinger + * Copyright (C) 2002 by MontaVista Software. + */ + +/* These are all the functions necessary to implement + * POSIX clocks & timers + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#ifndef div_long_long_rem +#include + +#define div_long_long_rem(dividend,divisor,remainder) ({ \ + u64 result = dividend; \ + *remainder = do_div(result,divisor); \ + result; }) + +#endif /* ifndef div_long_long_rem */ + +/* + * Management arrays for POSIX timers. Timers are kept in slab memory + * Timer ids are allocated by an external routine that keeps track of the + * id and the timer. The external interface is: + * + *void *idr_find(struct idr *idp, int id); to find timer_id + *int idr_get_new(struct idr *idp, void *ptr); to get a new id and + * related it to + *void idr_remove(struct idr *idp, int id); to release + *void idr_init(struct idr *idp); to initialize + * which we supply. + * The idr_get_new *may* call slab for more memory so it must not be + * called under a spin lock. Likewise idr_remore may release memory + * (but it may be ok to do this under a lock...). + * idr_find is just a memory look up and is quite fast. A zero return + * indicates that the requested id does not exist. + + */ +/* + * Lets keep our timers in a slab cache :-) + */ +static kmem_cache_t *posix_timers_cache; +struct idr posix_timers_id; + +/* + * Just because the timer is not in the timer list does NOT mean it is + * inactive. It could be in the "fire" routine getting a new expire time. + */ +#define TIMER_INACTIVE 1 +#define TIMER_RETRY 1 +#ifdef CONFIG_SMP +#define timer_active(tmr) (tmr->it_timer.entry.prev != (void *)TIMER_INACTIVE) +#define set_timer_inactive(tmr) tmr->it_timer.entry.prev = (void *)TIMER_INACTIVE +#else +#define timer_active(tmr) BARFY // error to use outside of SMP +#define set_timer_inactive(tmr) +#endif +/* + * The timer ID is turned into a timer address by idr_find(). + * Verifying a valid ID consists of: + * + * a) checking that idr_find() returns other than zero. + * b) checking that the timer id matches the one in the timer itself. + * c) that the timer owner is in the callers thread group. + */ + +extern rwlock_t xtime_lock; + +/* + * CLOCKs: The POSIX standard calls for a couple of clocks and allows us + * to implement others. This structure defines the various + * clocks and allows the possibility of adding others. We + * provide an interface to add clocks to the table and expect + * the "arch" code to add at least one clock that is high + * resolution. Here we define the standard CLOCK_REALTIME as a + * 1/HZ resolution clock. + + * CPUTIME & THREAD_CPUTIME: We are not, at this time, definding these + * two clocks (and the other process related clocks (Std + * 1003.1d-1999). The way these should be supported, we think, + * is to use large negative numbers for the two clocks that are + * pinned to the executing process and to use -pid for clocks + * pinned to particular pids. Calls which supported these clock + * ids would split early in the function. + + * RESOLUTION: Clock resolution is used to round up timer and interval + * times, NOT to report clock times, which are reported with as + * much resolution as the system can muster. In some cases this + * resolution may depend on the underlaying clock hardware and + * may not be quantifiable until run time, and only then is the + * necessary code is written. The standard says we should say + * something about this issue in the documentation... + + * FUNCTIONS: The CLOCKs structure defines possible functions to handle + * various clock functions. For clocks that use the standard + * system timer code these entries should be NULL. This will + * allow dispatch without the overhead of indirect function + * calls. CLOCKS that depend on other sources (e.g. WWV or GPS) + * must supply functions here, even if the function just returns + * ENOSYS. The standard POSIX timer management code assumes the + * following: 1.) The k_itimer struct (sched.h) is used for the + * timer. 2.) The list, it_lock, it_clock, it_id and it_process + * fields are not modified by timer code. + * + * At this time all functions EXCEPT clock_nanosleep can be + * redirected by the CLOCKS structure. Clock_nanosleep is in + * there, but the code ignors it. + * + * Permissions: It is assumed that the clock_settime() function defined + * for each clock will take care of permission checks. Some + * clocks may be set able by any user (i.e. local process + * clocks) others not. Currently the only set able clock we + * have is CLOCK_REALTIME and its high res counter part, both of + * which we beg off on and pass to do_sys_settimeofday(). + */ + +struct k_clock posix_clocks[MAX_CLOCKS]; + +#define if_clock_do(clock_fun, alt_fun,parms) (! clock_fun)? alt_fun parms :\ + clock_fun parms + +#define p_timer_get( clock,a,b) if_clock_do((clock)->timer_get, \ + do_timer_gettime, \ + (a,b)) + +#define p_nsleep( clock,a,b,c) if_clock_do((clock)->nsleep, \ + do_nsleep, \ + (a,b,c)) + +#define p_timer_del( clock,a) if_clock_do((clock)->timer_del, \ + do_timer_delete, \ + (a)) + +void register_posix_clock(int clock_id, struct k_clock *new_clock); + +static int do_posix_gettime(struct k_clock *clock, struct timespec *tp); + +int do_posix_clock_monotonic_gettime(struct timespec *tp); + +int do_posix_clock_monotonic_settime(struct timespec *tp); +static struct k_itimer *lock_timer(timer_t timer_id, long *flags); +static inline void unlock_timer(struct k_itimer *timr, long flags); + +/* + * Initialize everything, well, just everything in Posix clocks/timers ;) + */ + +static __init int +init_posix_timers(void) +{ + struct k_clock clock_realtime = {.res = NSEC_PER_SEC / HZ }; + struct k_clock clock_monotonic = {.res = NSEC_PER_SEC / HZ, + .clock_get = do_posix_clock_monotonic_gettime, + .clock_set = do_posix_clock_monotonic_settime + }; + + register_posix_clock(CLOCK_REALTIME, &clock_realtime); + register_posix_clock(CLOCK_MONOTONIC, &clock_monotonic); + + posix_timers_cache = kmem_cache_create("posix_timers_cache", + sizeof (struct k_itimer), 0, 0, + 0, 0); + idr_init(&posix_timers_id); + return 0; +} + +__initcall(init_posix_timers); + +static inline int +tstojiffie(struct timespec *tp, int res, unsigned long *jiff) +{ + unsigned long sec = tp->tv_sec; + long nsec = tp->tv_nsec + res - 1; + + if (nsec > NSEC_PER_SEC) { + sec++; + nsec -= NSEC_PER_SEC; + } + + /* + * A note on jiffy overflow: It is possible for the system to + * have been up long enough for the jiffies quanity to overflow. + * In order for correct timer evaluations we require that the + * specified time be somewhere between now and now + (max + * unsigned int/2). Times beyond this will be truncated back to + * this value. This is done in the absolute adjustment code, + * below. Here it is enough to just discard the high order + * bits. + */ + *jiff = HZ * sec; + /* + * Do the res thing. (Don't forget the add in the declaration of nsec) + */ + nsec -= nsec % res; + /* + * Split to jiffie and sub jiffie + */ + *jiff += nsec / (NSEC_PER_SEC / HZ); + /* + * We trust that the optimizer will use the remainder from the + * above div in the following operation as long as they are close. + */ + return 0; +} +static void +tstotimer(struct itimerspec *time, struct k_itimer *timer) +{ + int res = posix_clocks[timer->it_clock].res; + tstojiffie(&time->it_value, res, &timer->it_timer.expires); + tstojiffie(&time->it_interval, res, &timer->it_incr); +} + +static void +schedule_next_timer(struct k_itimer *timr) +{ + struct now_struct now; + + /* Set up the timer for the next interval (if there is one) */ + if (timr->it_incr == 0) { + { + set_timer_inactive(timr); + return; + } + } + posix_get_now(&now); + while (posix_time_before(&timr->it_timer, &now)) { + posix_bump_timer(timr); + }; + timr->it_overrun_last = timr->it_overrun; + timr->it_overrun = -1; + add_timer(&timr->it_timer); +} + +/* + + * This function is exported for use by the signal deliver code. It is + * called just prior to the info block being released and passes that + * block to us. It's function is to update the overrun entry AND to + * restart the timer. It should only be called if the timer is to be + * restarted (i.e. we have flagged this in the sys_private entry of the + * info block). + * + * To protect aginst the timer going away while the interrupt is queued, + * we require that the it_requeue_pending flag be set. + + */ +void +do_schedule_next_timer(struct siginfo *info) +{ + + struct k_itimer *timr; + long flags; + + timr = lock_timer(info->si_tid, &flags); + + if (!timr || !timr->it_requeue_pending) + goto exit; + + schedule_next_timer(timr); + info->si_overrun = timr->it_overrun_last; + exit: + if (timr) + unlock_timer(timr, flags); +} + +/* + + * Notify the task and set up the timer for the next expiration (if + * applicable). This function requires that the k_itimer structure + * it_lock is taken. This code will requeue the timer only if we get + * either an error return or a flag (ret > 0) from send_seg_info + * indicating that the signal was either not queued or was queued + * without an info block. In this case, we will not get a call back to + * do_schedule_next_timer() so we do it here. This should be rare... + + */ + +static void +timer_notify_task(struct k_itimer *timr) +{ + struct siginfo info; + int ret; + + memset(&info, 0, sizeof (info)); + + /* Send signal to the process that owns this timer. */ + info.si_signo = timr->it_sigev_signo; + info.si_errno = 0; + info.si_code = SI_TIMER; + info.si_tid = timr->it_id; + info.si_value = timr->it_sigev_value; + if (timr->it_incr == 0) { + set_timer_inactive(timr); + } else { + timr->it_requeue_pending = info.si_sys_private = 1; + } + ret = send_sig_info(info.si_signo, &info, timr->it_process); + switch (ret) { + + default: + /* + * Signal was not sent. May or may not need to + * restart the timer. + */ + printk(KERN_WARNING "sending signal failed: %d\n", ret); + case 1: + /* + * signal was not sent because of sig_ignor or, + * possibly no queue memory OR will be sent but, + * we will not get a call back to restart it AND + * it should be restarted. + */ + schedule_next_timer(timr); + case 0: + /* + * all's well new signal queued + */ + break; + } +} + +/* + + * This function gets called when a POSIX.1b interval timer expires. It + * is used as a callback from the kernel internal timer. The + * run_timer_list code ALWAYS calls with interrutps on. + + */ +static void +posix_timer_fn(unsigned long __data) +{ + struct k_itimer *timr = (struct k_itimer *) __data; + long flags; + + spin_lock_irqsave(&timr->it_lock, flags); + timer_notify_task(timr); + unlock_timer(timr, flags); +} + +/* + * For some reason mips/mips64 define the SIGEV constants plus 128. + * Here we define a mask to get rid of the common bits. The + * optimizer should make this costless to all but mips. + */ +#if (ARCH == mips) || (ARCH == mips64) +#define MIPS_SIGEV ~(SIGEV_NONE & \ + SIGEV_SIGNAL & \ + SIGEV_THREAD & \ + SIGEV_THREAD_ID) +#else +#define MIPS_SIGEV (int)-1 +#endif + +static inline struct task_struct * +good_sigevent(sigevent_t * event) +{ + struct task_struct *rtn = current; + + if (event->sigev_notify & SIGEV_THREAD_ID & MIPS_SIGEV) { + if (!(rtn = + find_task_by_pid(event->sigev_notify_thread_id)) || + rtn->tgid != current->tgid) { + return NULL; + } + } + if (event->sigev_notify & SIGEV_SIGNAL & MIPS_SIGEV) { + if ((unsigned) (event->sigev_signo > SIGRTMAX)) + return NULL; + } + if (event->sigev_notify & ~(SIGEV_SIGNAL | SIGEV_THREAD_ID)) { + return NULL; + } + return rtn; +} + +void +register_posix_clock(int clock_id, struct k_clock *new_clock) +{ + if ((unsigned) clock_id >= MAX_CLOCKS) { + printk("POSIX clock register failed for clock_id %d\n", + clock_id); + return; + } + posix_clocks[clock_id] = *new_clock; +} + +static struct k_itimer * +alloc_posix_timer(void) +{ + struct k_itimer *tmr; + tmr = kmem_cache_alloc(posix_timers_cache, GFP_KERNEL); + memset(tmr, 0, sizeof (struct k_itimer)); + return (tmr); +} + +static void +release_posix_timer(struct k_itimer *tmr) +{ + if (tmr->it_id > 0) + idr_remove(&posix_timers_id, tmr->it_id); + kmem_cache_free(posix_timers_cache, tmr); +} + +/* Create a POSIX.1b interval timer. */ + +asmlinkage int +sys_timer_create(clockid_t which_clock, + struct sigevent *timer_event_spec, timer_t * created_timer_id) +{ + int error = 0; + struct k_itimer *new_timer = NULL; + timer_t new_timer_id; + struct task_struct *process = 0; + sigevent_t event; + + if ((unsigned) which_clock >= MAX_CLOCKS || + !posix_clocks[which_clock].res) return -EINVAL; + + new_timer = alloc_posix_timer(); + if (new_timer == NULL) + return -EAGAIN; + + spin_lock_init(&new_timer->it_lock); + new_timer_id = (timer_t) idr_get_new(&posix_timers_id, + (void *) new_timer); + new_timer->it_id = new_timer_id; + if (new_timer_id == 0) { + error = -EAGAIN; + goto out; + } + /* + * return the timer_id now. The next step is hard to + * back out if there is an error. + */ + if (copy_to_user(created_timer_id, + &new_timer_id, sizeof (new_timer_id))) { + error = -EFAULT; + goto out; + } + if (timer_event_spec) { + if (copy_from_user(&event, timer_event_spec, sizeof (event))) { + error = -EFAULT; + goto out; + } + read_lock(&tasklist_lock); + if ((process = good_sigevent(&event))) { + /* + + * We may be setting up this process for another + * thread. It may be exitiing. To catch this + * case the we check the PF_EXITING flag. If + * the flag is not set, the task_lock will catch + * him before it is too late (in exit_itimers). + + * The exec case is a bit more invloved but easy + * to code. If the process is in our thread + * group (and it must be or we would not allow + * it here) and is doing an exec, it will cause + * us to be killed. In this case it will wait + * for us to die which means we can finish this + * linkage with our last gasp. I.e. no code :) + + */ + task_lock(process); + if (!(process->flags & PF_EXITING)) { + list_add(&new_timer->list, + &process->posix_timers); + task_unlock(process); + } else { + task_unlock(process); + process = 0; + } + } + read_unlock(&tasklist_lock); + if (!process) { + error = -EINVAL; + goto out; + } + new_timer->it_sigev_notify = event.sigev_notify; + new_timer->it_sigev_signo = event.sigev_signo; + new_timer->it_sigev_value = event.sigev_value; + } else { + new_timer->it_sigev_notify = SIGEV_SIGNAL; + new_timer->it_sigev_signo = SIGALRM; + new_timer->it_sigev_value.sival_int = new_timer->it_id; + process = current; + task_lock(process); + list_add(&new_timer->list, &process->posix_timers); + task_unlock(process); + } + + new_timer->it_clock = which_clock; + new_timer->it_incr = 0; + new_timer->it_overrun = -1; + init_timer(&new_timer->it_timer); + new_timer->it_timer.expires = 0; + new_timer->it_timer.data = (unsigned long) new_timer; + new_timer->it_timer.function = posix_timer_fn; + set_timer_inactive(new_timer); + + /* + * Once we set the process, it can be found so do it last... + */ + new_timer->it_process = process; + + out: + if (error) { + release_posix_timer(new_timer); + } + return error; +} + +/* + * good_timespec + * + * This function checks the elements of a timespec structure. + * + * Arguments: + * ts : Pointer to the timespec structure to check + * + * Return value: + * If a NULL pointer was passed in, or the tv_nsec field was less than 0 + * or greater than NSEC_PER_SEC, or the tv_sec field was less than 0, + * this function returns 0. Otherwise it returns 1. + + */ + +static int +good_timespec(const struct timespec *ts) +{ + if ((ts == NULL) || + (ts->tv_sec < 0) || + ((unsigned) ts->tv_nsec >= NSEC_PER_SEC)) return 0; + return 1; +} + +static inline void +unlock_timer(struct k_itimer *timr, long flags) +{ + spin_unlock_irqrestore(&timr->it_lock, flags); +} + +/* + + * Locking issues: We need to protect the result of the id look up until + * we get the timer locked down so it is not deleted under us. The + * removal is done under the idr spinlock so we use that here to bridge + * the find to the timer lock. To avoid a dead lock, the timer id MUST + * be release with out holding the timer lock. + + */ +static struct k_itimer * +lock_timer(timer_t timer_id, long *flags) +{ + struct k_itimer *timr; + + idr_lock(&posix_timers_id); + timr = (struct k_itimer *) idr_find_nolock(&posix_timers_id, + (int) timer_id); + if (timr) { + spin_lock_irqsave(&timr->it_lock, *flags); + idr_unlock(&posix_timers_id); + + if (timr->it_id != timer_id) { + BUG(); + } + if (!(timr->it_process) || + timr->it_process->tgid != current->tgid) { + unlock_timer(timr, *flags); + timr = NULL; + } + } else { + idr_unlock(&posix_timers_id); + } + + return timr; +} + +/* + + * Get the time remaining on a POSIX.1b interval timer. This function + * is ALWAYS called with spin_lock_irq on the timer, thus it must not + * mess with irq. + + * We have a couple of messes to clean up here. First there is the case + * of a timer that has a requeue pending. These timers should appear to + * be in the timer list with an expiry as if we were to requeue them + * now. + + * The second issue is the SIGEV_NONE timer which may be active but is + * not really ever put in the timer list (to save system resources). + * This timer may be expired, and if so, we will do it here. Otherwise + * it is the same as a requeue pending timer WRT to what we should + * report. + + */ +void inline +do_timer_gettime(struct k_itimer *timr, struct itimerspec *cur_setting) +{ + long sub_expires; + unsigned long expires; + struct now_struct now; + + do { + expires = timr->it_timer.expires; + } while ((volatile long) (timr->it_timer.expires) != expires); + + posix_get_now(&now); + + if (expires && (timr->it_sigev_notify & SIGEV_NONE) && !timr->it_incr) { + if (posix_time_before(&timr->it_timer, &now)) { + timr->it_timer.expires = expires = 0; + } + } + if (expires) { + if (timr->it_requeue_pending || + (timr->it_sigev_notify & SIGEV_NONE)) { + while (posix_time_before(&timr->it_timer, &now)) { + posix_bump_timer(timr); + }; + } else { + if (!timer_pending(&timr->it_timer)) { + sub_expires = expires = 0; + } + } + if (expires) { + expires -= now.jiffies; + } + } + jiffies_to_timespec(expires, &cur_setting->it_value); + jiffies_to_timespec(timr->it_incr, &cur_setting->it_interval); + + if (cur_setting->it_value.tv_sec < 0) { + cur_setting->it_value.tv_nsec = 1; + cur_setting->it_value.tv_sec = 0; + } +} +/* Get the time remaining on a POSIX.1b interval timer. */ +asmlinkage int +sys_timer_gettime(timer_t timer_id, struct itimerspec *setting) +{ + struct k_itimer *timr; + struct itimerspec cur_setting; + long flags; + + timr = lock_timer(timer_id, &flags); + if (!timr) + return -EINVAL; + + p_timer_get(&posix_clocks[timr->it_clock], timr, &cur_setting); + + unlock_timer(timr, flags); + + if (copy_to_user(setting, &cur_setting, sizeof (cur_setting))) + return -EFAULT; + + return 0; +} +/* + + * Get the number of overruns of a POSIX.1b interval timer. This is to + * be the overrun of the timer last delivered. At the same time we are + * accumulating overruns on the next timer. The overrun is frozen when + * the signal is delivered, either at the notify time (if the info block + * is not queued) or at the actual delivery time (as we are informed by + * the call back to do_schedule_next_timer(). So all we need to do is + * to pick up the frozen overrun. + + */ + +asmlinkage int +sys_timer_getoverrun(timer_t timer_id) +{ + struct k_itimer *timr; + int overrun; + long flags; + + timr = lock_timer(timer_id, &flags); + if (!timr) + return -EINVAL; + + overrun = timr->it_overrun_last; + unlock_timer(timr, flags); + + return overrun; +} +/* Adjust for absolute time */ +/* + * If absolute time is given and it is not CLOCK_MONOTONIC, we need to + * adjust for the offset between the timer clock (CLOCK_MONOTONIC) and + * what ever clock he is using. + * + * If it is relative time, we need to add the current (CLOCK_MONOTONIC) + * time to it to get the proper time for the timer. + */ +static int +adjust_abs_time(struct k_clock *clock, struct timespec *tp, int abs) +{ + struct timespec now; + struct timespec oc; + do_posix_clock_monotonic_gettime(&now); + + if (abs && + (posix_clocks[CLOCK_MONOTONIC].clock_get == clock->clock_get)) { + } else { + + if (abs) { + do_posix_gettime(clock, &oc); + } else { + oc.tv_nsec = oc.tv_sec = 0; + } + tp->tv_sec += now.tv_sec - oc.tv_sec; + tp->tv_nsec += now.tv_nsec - oc.tv_nsec; + + /* + * Normalize... + */ + if ((tp->tv_nsec - NSEC_PER_SEC) >= 0) { + tp->tv_nsec -= NSEC_PER_SEC; + tp->tv_sec++; + } + if ((tp->tv_nsec) < 0) { + tp->tv_nsec += NSEC_PER_SEC; + tp->tv_sec--; + } + } + /* + * Check if the requested time is prior to now (if so set now) or + * is more than the timer code can handle (if so we error out). + * The (unsigned) catches the case of prior to "now" with the same + * test. Only on failure do we sort out what happened, and then + * we use the (unsigned) to error out negative seconds. + */ + if ((unsigned) (tp->tv_sec - now.tv_sec) > (MAX_JIFFY_OFFSET / HZ)) { + if ((unsigned) tp->tv_sec < now.tv_sec) { + tp->tv_sec = now.tv_sec; + tp->tv_nsec = now.tv_nsec; + } else { + // tp->tv_sec = now.tv_sec + (MAX_JIFFY_OFFSET / HZ); + /* + * This is a considered response, not exactly in + * line with the standard (in fact it is silent on + * possible overflows). We assume such a large + * value is ALMOST always a programming error and + * try not to compound it by setting a really dumb + * value. + */ + return -EINVAL; + } + } + return 0; +} + +/* Set a POSIX.1b interval timer. */ +/* timr->it_lock is taken. */ +static inline int +do_timer_settime(struct k_itimer *timr, int flags, + struct itimerspec *new_setting, struct itimerspec *old_setting) +{ + struct k_clock *clock = &posix_clocks[timr->it_clock]; + + if (old_setting) { + do_timer_gettime(timr, old_setting); + } + + /* disable the timer */ + timr->it_incr = 0; + /* + * careful here. If smp we could be in the "fire" routine which will + * be spinning as we hold the lock. But this is ONLY an SMP issue. + */ +#ifdef CONFIG_SMP + if (timer_active(timr) && !del_timer(&timr->it_timer)) { + /* + * It can only be active if on an other cpu. Since + * we have cleared the interval stuff above, it should + * clear once we release the spin lock. Of course once + * we do that anything could happen, including the + * complete melt down of the timer. So return with + * a "retry" exit status. + */ + return TIMER_RETRY; + } + set_timer_inactive(timr); +#else + del_timer(&timr->it_timer); +#endif + timr->it_requeue_pending = 0; + timr->it_overrun_last = 0; + timr->it_overrun = -1; + /* + *switch off the timer when it_value is zero + */ + if ((new_setting->it_value.tv_sec == 0) && + (new_setting->it_value.tv_nsec == 0)) { + timr->it_timer.expires = 0; + return 0; + } + + if ((flags & TIMER_ABSTIME) && + (clock->clock_get != do_posix_clock_monotonic_gettime)) { + } + if (adjust_abs_time(clock, + &new_setting->it_value, flags & TIMER_ABSTIME)) { + return -EINVAL; + } + tstotimer(new_setting, timr); + + /* + * For some reason the timer does not fire immediately if expires is + * equal to jiffies, so the timer notify function is called directly. + * We do not even queue SIGEV_NONE timers! + */ + if (!(timr->it_sigev_notify & SIGEV_NONE)) { + if (timr->it_timer.expires == jiffies) { + timer_notify_task(timr); + } else + add_timer(&timr->it_timer); + } + return 0; +} + +/* Set a POSIX.1b interval timer */ +asmlinkage int +sys_timer_settime(timer_t timer_id, int flags, + const struct itimerspec *new_setting, + struct itimerspec *old_setting) +{ + struct k_itimer *timr; + struct itimerspec new_spec, old_spec; + int error = 0; + long flag; + struct itimerspec *rtn = old_setting ? &old_spec : NULL; + + if (new_setting == NULL) { + return -EINVAL; + } + + if (copy_from_user(&new_spec, new_setting, sizeof (new_spec))) { + return -EFAULT; + } + + if ((!good_timespec(&new_spec.it_interval)) || + (!good_timespec(&new_spec.it_value))) { + return -EINVAL; + } + retry: + timr = lock_timer(timer_id, &flag); + if (!timr) + return -EINVAL; + + if (!posix_clocks[timr->it_clock].timer_set) { + error = do_timer_settime(timr, flags, &new_spec, rtn); + } else { + error = posix_clocks[timr->it_clock].timer_set(timr, + flags, + &new_spec, rtn); + } + unlock_timer(timr, flag); + if (error == TIMER_RETRY) { + rtn = NULL; // We already got the old time... + goto retry; + } + + if (old_setting && !error) { + if (copy_to_user(old_setting, &old_spec, sizeof (old_spec))) { + error = -EFAULT; + } + } + + return error; +} + +static inline int +do_timer_delete(struct k_itimer *timer) +{ + timer->it_incr = 0; +#ifdef CONFIG_SMP + if (timer_active(timer) && + !del_timer(&timer->it_timer) && !timer->it_requeue_pending) { + /* + * It can only be active if on an other cpu. Since + * we have cleared the interval stuff above, it should + * clear once we release the spin lock. Of course once + * we do that anything could happen, including the + * complete melt down of the timer. So return with + * a "retry" exit status. + */ + return TIMER_RETRY; + } +#else + del_timer(&timer->it_timer); +#endif + return 0; +} + +/* Delete a POSIX.1b interval timer. */ +asmlinkage int +sys_timer_delete(timer_t timer_id) +{ + struct k_itimer *timer; + long flags; + +#ifdef CONFIG_SMP + int error; + retry_delete: +#endif + + timer = lock_timer(timer_id, &flags); + if (!timer) + return -EINVAL; + +#ifdef CONFIG_SMP + error = p_timer_del(&posix_clocks[timer->it_clock], timer); + + if (error == TIMER_RETRY) { + unlock_timer(timer, flags); + goto retry_delete; + } +#else + p_timer_del(&posix_clocks[timer->it_clock], timer); +#endif + + task_lock(timer->it_process); + + list_del(&timer->list); + + task_unlock(timer->it_process); + + /* + * This keeps any tasks waiting on the spin lock from thinking + * they got something (see the lock code above). + */ + timer->it_process = NULL; + unlock_timer(timer, flags); + release_posix_timer(timer); + return 0; +} +/* + * return timer owned by the process, used by exit_itimers + */ +static inline void +itimer_delete(struct k_itimer *timer) +{ + if (sys_timer_delete(timer->it_id)) { + BUG(); + } +} +/* + * This is exported to exit and exec + */ +void +exit_itimers(struct task_struct *tsk) +{ + struct k_itimer *tmr; + + task_lock(tsk); + while (!list_empty(&tsk->posix_timers)) { + tmr = list_entry(tsk->posix_timers.next, struct k_itimer, list); + task_unlock(tsk); + itimer_delete(tmr); + task_lock(tsk); + } + task_unlock(tsk); +} + +/* + * And now for the "clock" calls + + * These functions are called both from timer functions (with the timer + * spin_lock_irq() held and from clock calls with no locking. They must + * use the save flags versions of locks. + */ +static int +do_posix_gettime(struct k_clock *clock, struct timespec *tp) +{ + + if (clock->clock_get) { + return clock->clock_get(tp); + } + + do_gettimeofday((struct timeval *) tp); + tp->tv_nsec *= NSEC_PER_USEC; + return 0; +} + +/* + * We do ticks here to avoid the irq lock ( they take sooo long) + * Note also that the while loop assures that the sub_jiff_offset + * will be less than a jiffie, thus no need to normalize the result. + * Well, not really, if called with ints off :( + */ + +int +do_posix_clock_monotonic_gettime(struct timespec *tp) +{ + long sub_sec; + u64 jiffies_64_f; + +#if (BITS_PER_LONG > 32) + + jiffies_64_f = jiffies_64; + +#elif defined(CONFIG_SMP) + + /* Tricks don't work here, must take the lock. Remember, called + * above from both timer and clock system calls => save flags. + */ + { + unsigned long flags; + read_lock_irqsave(&xtime_lock, flags); + jiffies_64_f = jiffies_64; + + read_unlock_irqrestore(&xtime_lock, flags); + } +#elif ! defined(CONFIG_SMP) && (BITS_PER_LONG < 64) + unsigned long jiffies_f; + do { + jiffies_f = jiffies; + barrier(); + jiffies_64_f = jiffies_64; + } while (unlikely(jiffies_f != jiffies)); + +#endif + tp->tv_sec = div_long_long_rem(jiffies_64_f, HZ, &sub_sec); + + tp->tv_nsec = sub_sec * (NSEC_PER_SEC / HZ); + return 0; +} + +int +do_posix_clock_monotonic_settime(struct timespec *tp) +{ + return -EINVAL; +} + +asmlinkage int +sys_clock_settime(clockid_t which_clock, const struct timespec *tp) +{ + struct timespec new_tp; + + if ((unsigned) which_clock >= MAX_CLOCKS || + !posix_clocks[which_clock].res) return -EINVAL; + if (copy_from_user(&new_tp, tp, sizeof (*tp))) + return -EFAULT; + if (posix_clocks[which_clock].clock_set) { + return posix_clocks[which_clock].clock_set(&new_tp); + } + new_tp.tv_nsec /= NSEC_PER_USEC; + return do_sys_settimeofday((struct timeval *) &new_tp, NULL); +} +asmlinkage int +sys_clock_gettime(clockid_t which_clock, struct timespec *tp) +{ + struct timespec rtn_tp; + int error = 0; + + if ((unsigned) which_clock >= MAX_CLOCKS || + !posix_clocks[which_clock].res) return -EINVAL; + + error = do_posix_gettime(&posix_clocks[which_clock], &rtn_tp); + + if (!error) { + if (copy_to_user(tp, &rtn_tp, sizeof (rtn_tp))) { + error = -EFAULT; + } + } + return error; + +} +asmlinkage int +sys_clock_getres(clockid_t which_clock, struct timespec *tp) +{ + struct timespec rtn_tp; + + if ((unsigned) which_clock >= MAX_CLOCKS || + !posix_clocks[which_clock].res) return -EINVAL; + + rtn_tp.tv_sec = 0; + rtn_tp.tv_nsec = posix_clocks[which_clock].res; + if (tp) { + if (copy_to_user(tp, &rtn_tp, sizeof (rtn_tp))) { + return -EFAULT; + } + } + return 0; + +} +static void +nanosleep_wake_up(unsigned long __data) +{ + struct task_struct *p = (struct task_struct *) __data; + + wake_up_process(p); +} + +/* + * The standard says that an absolute nanosleep call MUST wake up at + * the requested time in spite of clock settings. Here is what we do: + * For each nanosleep call that needs it (only absolute and not on + * CLOCK_MONOTONIC* (as it can not be set)) we thread a little structure + * into the "nanosleep_abs_list". All we need is the task_struct pointer. + * When ever the clock is set we just wake up all those tasks. The rest + * is done by the while loop in clock_nanosleep(). + + * On locking, clock_was_set() is called from update_wall_clock which + * holds (or has held for it) a write_lock_irq( xtime_lock) and is + * called from the timer bh code. Thus we need the irq save locks. + */ +spinlock_t nanosleep_abs_list_lock = SPIN_LOCK_UNLOCKED; + +struct list_head nanosleep_abs_list = LIST_HEAD_INIT(nanosleep_abs_list); + +struct abs_struct { + struct list_head list; + struct task_struct *t; +}; + +void +clock_was_set(void) +{ + struct list_head *pos; + unsigned long flags; + + spin_lock_irqsave(&nanosleep_abs_list_lock, flags); + list_for_each(pos, &nanosleep_abs_list) { + wake_up_process(list_entry(pos, struct abs_struct, list)->t); + } + spin_unlock_irqrestore(&nanosleep_abs_list_lock, flags); +} + +long clock_nanosleep_restart(struct restart_block *restart_block); + +extern long do_clock_nanosleep(clockid_t which_clock, int flags, + struct timespec *t); + +#ifdef FOLD_NANO_SLEEP_INTO_CLOCK_NANO_SLEEP + +asmlinkage long +sys_nanosleep(struct timespec *rqtp, struct timespec *rmtp) +{ + struct timespec t; + long ret; + + if (copy_from_user(&t, rqtp, sizeof (t))) + return -EFAULT; + + ret = do_clock_nanosleep(CLOCK_REALTIME, 0, &t); + + if (ret == -ERESTART_RESTARTBLOCK && rmtp && + copy_to_user(rmtp, &t, sizeof (t))) + return -EFAULT; + return ret; +} +#endif // ! FOLD_NANO_SLEEP_INTO_CLOCK_NANO_SLEEP + +asmlinkage long +sys_clock_nanosleep(clockid_t which_clock, int flags, + const struct timespec *rqtp, struct timespec *rmtp) +{ + struct timespec t; + int ret; + + if ((unsigned) which_clock >= MAX_CLOCKS || + !posix_clocks[which_clock].res) return -EINVAL; + + if (copy_from_user(&t, rqtp, sizeof (struct timespec))) + return -EFAULT; + + if ((unsigned) t.tv_nsec >= NSEC_PER_SEC || t.tv_sec < 0) + return -EINVAL; + + ret = do_clock_nanosleep(which_clock, flags, &t); + + if ((ret == -ERESTART_RESTARTBLOCK) && rmtp && + copy_to_user(rmtp, &t, sizeof (t))) + return -EFAULT; + return ret; + +} + +long +do_clock_nanosleep(clockid_t which_clock, int flags, struct timespec *tsave) +{ + struct timespec t; + struct timer_list new_timer; + struct abs_struct abs_struct = { list:{next:0} }; + int abs; + int rtn = 0; + int active; + struct restart_block *restart_block = + ¤t_thread_info()->restart_block; + + init_timer(&new_timer); + new_timer.expires = 0; + new_timer.data = (unsigned long) current; + new_timer.function = nanosleep_wake_up; + abs = flags & TIMER_ABSTIME; + + if (restart_block->fn == clock_nanosleep_restart) { + /* + * Interrupted by a non-delivered signal, pick up remaining + * time and continue. + */ + restart_block->fn = do_no_restart_syscall; + if (!restart_block->arg2) + return -EINTR; + + new_timer.expires = restart_block->arg2; + if (time_before(new_timer.expires, jiffies)) + return 0; + } + + if (abs && (posix_clocks[which_clock].clock_get != + posix_clocks[CLOCK_MONOTONIC].clock_get)) { + spin_lock_irq(&nanosleep_abs_list_lock); + list_add(&abs_struct.list, &nanosleep_abs_list); + abs_struct.t = current; + spin_unlock_irq(&nanosleep_abs_list_lock); + } + do { + t = *tsave; + if ((abs || !new_timer.expires) && + !(rtn = adjust_abs_time(&posix_clocks[which_clock], + &t, abs))) { + /* + * On error, we don't set up the timer so + * we don't arm the timer so + * del_timer_sync() will return 0, thus + * active is zero... and so it goes. + */ + + tstojiffie(&t, + posix_clocks[which_clock].res, + &new_timer.expires); + } + if (new_timer.expires) { + current->state = TASK_INTERRUPTIBLE; + add_timer(&new_timer); + + schedule(); + } + } + while ((active = del_timer_sync(&new_timer)) && + !test_thread_flag(TIF_SIGPENDING)); + + if (abs_struct.list.next) { + spin_lock_irq(&nanosleep_abs_list_lock); + list_del(&abs_struct.list); + spin_unlock_irq(&nanosleep_abs_list_lock); + } + if (active) { + unsigned long jiffies_f = jiffies; + + /* + * Always restart abs calls from scratch to pick up any + * clock shifting that happened while we are away. + */ + if (abs) + return -ERESTARTNOHAND; + + jiffies_to_timespec(new_timer.expires - jiffies_f, tsave); + + while (tsave->tv_nsec < 0) { + tsave->tv_nsec += NSEC_PER_SEC; + tsave->tv_sec--; + } + if (tsave->tv_sec < 0) { + tsave->tv_sec = 0; + tsave->tv_nsec = 1; + } + restart_block->fn = clock_nanosleep_restart; + restart_block->arg0 = which_clock; + restart_block->arg1 = (int)tsave; + restart_block->arg2 = new_timer.expires; + return -ERESTART_RESTARTBLOCK; + } + + return rtn; +} +/* + * This will restart either clock_nanosleep or clock_nanosleep + */ +long +clock_nanosleep_restart(struct restart_block *restart_block) +{ + struct timespec t; + int ret = do_clock_nanosleep(restart_block->arg0, 0, &t); + + if ((ret == -ERESTART_RESTARTBLOCK) && restart_block->arg1 && + copy_to_user((struct timespec *)(restart_block->arg1), &t, + sizeof (t))) + return -EFAULT; + return ret; +} diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/kernel/signal.c linux/kernel/signal.c --- linux-2.5.50-bk7-kb/kernel/signal.c Sat Dec 7 21:36:44 2002 +++ linux/kernel/signal.c Sat Dec 7 21:37:58 2002 @@ -457,8 +457,6 @@ if (!collect_signal(sig, pending, info)) sig = 0; - /* XXX: Once POSIX.1b timers are in, if si_code == SI_TIMER, - we need to xchg out the timer overrun values. */ } recalc_sigpending(); @@ -473,6 +471,7 @@ */ int dequeue_signal(sigset_t *mask, siginfo_t *info) { + int ret; /* * Here we handle shared pending signals. To implement the full * semantics we need to unqueue and resend them. It will likely @@ -483,7 +482,13 @@ if (signr) __send_sig_info(signr, info, current); } - return __dequeue_signal(¤t->pending, mask, info); + ret = __dequeue_signal(¤t->pending, mask, info); + if ( ret && + ((info->si_code & __SI_MASK) == __SI_TIMER) && + info->si_sys_private){ + do_schedule_next_timer(info); + } + return ret; } static int rm_from_queue(int sig, struct sigpending *s) @@ -622,6 +627,7 @@ static int send_signal(int sig, struct siginfo *info, struct sigpending *signals) { struct sigqueue * q = NULL; + int ret = 0; /* * fast-pathed signals for kernel-internal things like SIGSTOP @@ -665,17 +671,26 @@ copy_siginfo(&q->info, info); break; } - } else if (sig >= SIGRTMIN && info && (unsigned long)info != 1 + } else { + if (sig >= SIGRTMIN && info && (unsigned long)info != 1 && info->si_code != SI_USER) /* * Queue overflow, abort. We may abort if the signal was rt * and sent by user using something other than kill(). */ - return -EAGAIN; + return -EAGAIN; + + if (((unsigned long)info > 1) && (info->si_code == SI_TIMER)) + /* + * Set up a return to indicate that we dropped + * the signal. + */ + ret = info->si_sys_private; + } out_set: sigaddset(&signals->signal, sig); - return 0; + return ret; } /* @@ -715,7 +730,7 @@ { int retval = send_signal(sig, info, &t->pending); - if (!retval && !sigismember(&t->blocked, sig)) + if ((retval >= 0) && !sigismember(&t->blocked, sig)) signal_wake_up(t); return retval; @@ -751,6 +766,12 @@ handle_stop_signal(sig, t); + if (((unsigned long)info > 2) && (info->si_code == SI_TIMER)) + /* + * Set up a return to indicate that we dropped the signal. + */ + ret = info->si_sys_private; + /* Optimize away the signal, if it's a signal that can be handled immediately (ie non-blocked and untraced) and that is ignored (either explicitly or by default). */ @@ -1477,8 +1498,9 @@ err |= __put_user(from->si_uid, &to->si_uid); break; case __SI_TIMER: - err |= __put_user(from->si_timer1, &to->si_timer1); - err |= __put_user(from->si_timer2, &to->si_timer2); + err |= __put_user(from->si_tid, &to->si_tid); + err |= __put_user(from->si_overrun, &to->si_overrun); + err |= __put_user(from->si_ptr, &to->si_ptr); break; case __SI_POLL: err |= __put_user(from->si_band, &to->si_band); diff -urP -I \$Id:.*Exp \$ -X /usr/src/patch.exclude linux-2.5.50-bk7-kb/kernel/timer.c linux/kernel/timer.c --- linux-2.5.50-bk7-kb/kernel/timer.c Sat Dec 7 21:36:44 2002 +++ linux/kernel/timer.c Sat Dec 7 21:37:58 2002 @@ -49,12 +49,11 @@ struct list_head vec[TVR_SIZE]; } tvec_root_t; -typedef struct timer_list timer_t; struct tvec_t_base_s { spinlock_t lock; unsigned long timer_jiffies; - timer_t *running_timer; + struct timer_list *running_timer; tvec_root_t tv1; tvec_t tv2; tvec_t tv3; @@ -67,7 +66,7 @@ /* Fake initialization */ static DEFINE_PER_CPU(tvec_base_t, tvec_bases) = { SPIN_LOCK_UNLOCKED }; -static void check_timer_failed(timer_t *timer) +static void check_timer_failed(struct timer_list *timer) { static int whine_count; if (whine_count < 16) { @@ -85,13 +84,13 @@ timer->magic = TIMER_MAGIC; } -static inline void check_timer(timer_t *timer) +static inline void check_timer(struct timer_list *timer) { if (timer->magic != TIMER_MAGIC) check_timer_failed(timer); } -static inline void internal_add_timer(tvec_base_t *base, timer_t *timer) +static inline void internal_add_timer(tvec_base_t *base, struct timer_list *timer) { unsigned long expires = timer->expires; unsigned long idx = expires - base->timer_jiffies; @@ -143,7 +142,7 @@ * Timers with an ->expired field in the past will be executed in the next * timer tick. It's illegal to add an already pending timer. */ -void add_timer(timer_t *timer) +void add_timer(struct timer_list *timer) { int cpu = get_cpu(); tvec_base_t *base = &per_cpu(tvec_bases, cpu); @@ -201,7 +200,7 @@ * (ie. mod_timer() of an inactive timer returns 0, mod_timer() of an * active timer returns 1.) */ -int mod_timer(timer_t *timer, unsigned long expires) +int mod_timer(struct timer_list *timer, unsigned long expires) { tvec_base_t *old_base, *new_base; unsigned long flags; @@ -278,7 +277,7 @@ * (ie. del_timer() of an inactive timer returns 0, del_timer() of an * active timer returns 1.) */ -int del_timer(timer_t *timer) +int del_timer(struct timer_list *timer) { unsigned long flags; tvec_base_t *base; @@ -317,7 +316,7 @@ * * The function returns whether it has deactivated a pending timer or not. */ -int del_timer_sync(timer_t *timer) +int del_timer_sync(struct timer_list *timer) { tvec_base_t *base; int i, ret = 0; @@ -360,9 +359,9 @@ * detach them individually, just clear the list afterwards. */ while (curr != head) { - timer_t *tmp; + struct timer_list *tmp; - tmp = list_entry(curr, timer_t, entry); + tmp = list_entry(curr, struct timer_list, entry); if (tmp->base != base) BUG(); next = curr->next; @@ -401,9 +400,9 @@ if (curr != head) { void (*fn)(unsigned long); unsigned long data; - timer_t *timer; + struct timer_list *timer; - timer = list_entry(curr, timer_t, entry); + timer = list_entry(curr, struct timer_list, entry); fn = timer->function; data = timer->data; @@ -505,6 +504,7 @@ if (xtime.tv_sec % 86400 == 0) { xtime.tv_sec--; time_state = TIME_OOP; + clock_was_set(); printk(KERN_NOTICE "Clock: inserting leap second 23:59:60 UTC\n"); } break; @@ -513,6 +513,7 @@ if ((xtime.tv_sec + 1) % 86400 == 0) { xtime.tv_sec++; time_state = TIME_WAIT; + clock_was_set(); printk(KERN_NOTICE "Clock: deleting leap second 23:59:59 UTC\n"); } break; @@ -965,7 +966,7 @@ */ signed long schedule_timeout(signed long timeout) { - timer_t timer; + struct timer_list timer; unsigned long expire; switch (timeout) @@ -1020,6 +1021,7 @@ { return current->pid; } +#ifndef FOLD_NANO_SLEEP_INTO_CLOCK_NANO_SLEEP static long nanosleep_restart(struct restart_block *restart) { @@ -1078,6 +1080,7 @@ } return ret; } +#endif // ! FOLD_NANO_SLEEP_INTO_CLOCK_NANO_SLEEP /* * sys_sysinfo - fill in sysinfo struct Binary files linux-2.5.50-bk7-kb/scripts/kallsyms and linux/scripts/kallsyms differ Binary files linux-2.5.50-bk7-kb/scripts/lxdialog/lxdialog and linux/scripts/lxdialog/lxdialog differ Binary files linux-2.5.50-bk7-kb/usr/gen_init_cpio and linux/usr/gen_init_cpio differ Binary files linux-2.5.50-bk7-kb/usr/initramfs_data.cpio.gz and linux/usr/initramfs_data.cpio.gz differ --------------E19E190DBD0FE11DBFEFDE6C-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/