Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751582AbaJPHXn (ORCPT ); Thu, 16 Oct 2014 03:23:43 -0400 Received: from mail1.bemta5.messagelabs.com ([195.245.231.147]:38838 "EHLO mail1.bemta5.messagelabs.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751542AbaJPHXk (ORCPT ); Thu, 16 Oct 2014 03:23:40 -0400 X-Env-Sender: Andreas.Werner@men.de X-Msg-Ref: server-14.tower-180.messagelabs.com!1413444218!36573762!1 X-Originating-IP: [80.255.6.145] X-StarScan-Received: X-StarScan-Version: 6.12.2; banners=-,-,- X-VirusChecked: Checked X-PGP-Universal: processed; by keys.men.de on Thu, 16 Oct 2014 09:23:38 +0200 Date: Thu, 16 Oct 2014 10:15:08 +0200 From: Andreas Werner To: CC: , , , , Subject: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver Message-ID: References: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.23 (2014-03-12) X-Originating-IP: [192.1.1.171] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Added driver to support the MEN Board Information EEPROM. The driver exports the production information as read only sysfs entries, as well as a user section which is read/write accessible. Tested on PPC QorIQ and Intel Atom E680. Tested-by: Johannes Thumshirn Signed-off-by: Andreas Werner --- MAINTAINERS | 6 + drivers/misc/eeprom/Kconfig | 10 + drivers/misc/eeprom/Makefile | 1 + drivers/misc/eeprom/men_eeprod.c | 560 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 577 insertions(+) create mode 100644 drivers/misc/eeprom/men_eeprod.c diff --git a/MAINTAINERS b/MAINTAINERS index 503da28..88ede76 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6029,6 +6029,12 @@ F: drivers/leds/leds-menf21bmc.c F: drivers/hwmon/menf21bmc_hwmon.c F: Documentation/hwmon/menf21bmc +MEN EEPROD (Board information EEPROM) +M: Andreas Werner +S: Supported +F: drivers/misc/eeprom/men_eeprod.c +F: Documentation/ABI/testing/sysfs-bus-i2c-devices-men_eeprod + METAG ARCHITECTURE M: James Hogan L: linux-metag@vger.kernel.org diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 9536852f..e087d08 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -62,6 +62,16 @@ config EEPROM_MAX6875 This driver can also be built as a module. If so, the module will be called max6875. +config EEPROM_MEN_EEPROD + tristate "MEN Board Information EEPROM" + depends on I2C && SYSFS + help + If you say yes here you get support for the MEN Board Information + EEPROM. This driver supports read-only access to the production + data section, and read-write access to the user section. + + This driver can also be built as a module. If so, the module + will be called men_eeprod. config EEPROM_93CX6 tristate "EEPROM 93CX6 support" diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 9507aec..8c70a81 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_EEPROM_AT24) += at24.o obj-$(CONFIG_EEPROM_AT25) += at25.o obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o obj-$(CONFIG_EEPROM_MAX6875) += max6875.o +obj-$(CONFIG_EEPROM_MEN_EEPROD) += men_eeprod.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o obj-$(CONFIG_EEPROM_SUNXI_SID) += sunxi_sid.o diff --git a/drivers/misc/eeprom/men_eeprod.c b/drivers/misc/eeprom/men_eeprod.c new file mode 100644 index 0000000..28264df --- /dev/null +++ b/drivers/misc/eeprom/men_eeprod.c @@ -0,0 +1,560 @@ +/* + * men_eeprod - MEN board information EEPROM driver. + * + * This is the driver for the Board Information EEPROM on almost + * all of the MEN boards. + * The driver exports each of the predefined eeprom sections as sysfs entries + * including an entry for user data. + * + * The EEPROM can be normally found at I2C address 0x57. + * + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/* + * Supports the following EEPROM layouts: + * + * Name eeprod_id user_section size + * ---------------------------------------------- + * EEPROD2 0x0E 232 byte + * + * See Documentation/ABI/testing/sysfs-bus-i2c-devices-men_eeprod + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define EEPROM_ID_ADDR 0x00 +#define EEPROM_SIZE 256 +#define EEPROD2_ID 0x0E + +#define DATE_YEAR_BIAS 1990 + +/* + * Internal structure of the Board Information EEPROM + * production data section + */ +struct eeprom_data { + uint8_t eeprod_id; + + uint8_t revision[3]; + uint32_t serialnr; + uint8_t board_model; + char hw_name[6]; + + uint8_t reserved; + + __be16 prod_date; + __be16 rep_date; + + uint8_t reserved2[4]; +}; + +struct men_eeprod_data { + struct bin_attribute user_section; + struct i2c_client *client; + struct eeprom_data eeprom; + struct mutex lock; + int smb_access; +}; + +static unsigned int i2c_timeout = 25; +module_param(i2c_timeout, uint, 0); +MODULE_PARM_DESC(i2c_timeout, "Time (in ms) to try reads and writes (default 25)"); + +#define OFFSET_TO_USR_SECTION(off) (off + sizeof(struct eeprom_data)) + +static inline int eeprod_get_day(__be16 eeprod_date) +{ + return be16_to_cpu(eeprod_date) & 0x001f; +} + +static inline int eeprod_get_month(__be16 eeprod_date) +{ + return (be16_to_cpu(eeprod_date) >> 5) & 0x000f; +} + +static inline int eeprod_get_year(__be16 eeprod_date) +{ + return ((be16_to_cpu(eeprod_date) >> 9) & 0x007f) + DATE_YEAR_BIAS; +} + +static ssize_t men_eeprom_read(struct men_eeprod_data *drv_data, + char *buf, loff_t offset, size_t count) +{ + struct i2c_client *i2c_client = drv_data->client; + unsigned long timeout, read_time; + int ret_val; + + /* + * Read fail if the previous write did not copmlete yet. + * Therefore we try to read a few times until this succeed. + */ + timeout = jiffies + msecs_to_jiffies(i2c_timeout); + do { + read_time = jiffies; + + /* + * if there is just one byte requested, we use read byte data. + * This will also protect us against a rollover if there is + * just one byte left to read. + */ + if (count == 1) { + ret_val = i2c_smbus_read_byte_data(i2c_client, offset); + if (ret_val >= 0) { + buf[0] = ret_val; + ret_val = 1; + } + goto err_byte; + } + + switch (drv_data->smb_access) { + case I2C_SMBUS_I2C_BLOCK_DATA: + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + + ret_val = i2c_smbus_read_i2c_block_data(i2c_client, + offset, count, + buf); + if (ret_val >= 0) + return count; + break; + case I2C_SMBUS_WORD_DATA: + ret_val = i2c_smbus_read_word_data(i2c_client, offset); + if (ret_val >= 0) { + buf[0] = ret_val & 0xff; + buf[1] = ret_val >> 8; + return 2; + } + break; + default: + ret_val = i2c_smbus_read_byte_data(i2c_client, offset); + if (ret_val >= 0) { + buf[0] = ret_val; + return 1; + } + break; + } + +err_byte: + usleep_range(600, 1000); + } while (time_before(read_time, timeout)); + + return -ETIMEDOUT; + +} + +static ssize_t men_user_section_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct men_eeprod_data *drv_data = dev_get_drvdata(dev); + int user_section_size = attr->size; + ssize_t retval = 0; + int bytes_read; + + if (off > user_section_size) + return 0; + + if (off + count > user_section_size) + count = user_section_size - off; + + off = OFFSET_TO_USR_SECTION(off); + + mutex_lock(&drv_data->lock); + while (count) { + bytes_read = men_eeprom_read(drv_data, buf, off, count); + + if (bytes_read <= 0) { + if (retval == 0) + retval = bytes_read; + break; + } + + buf += bytes_read; + off += bytes_read; + count -= bytes_read; + retval += bytes_read; + } + mutex_unlock(&drv_data->lock); + + return retval; +} + +static ssize_t men_eeprom_write(struct men_eeprod_data *drv_data, + char *buf, loff_t offset, size_t count) +{ + struct i2c_client *i2c_client = drv_data->client; + unsigned long timeout, write_time; + uint16_t word_data; + int ret_val; + + /* + * Write fail if the previous write did not copmlete yet. + * Therefore we try to write a few times until this succeed. + */ + timeout = jiffies + msecs_to_jiffies(i2c_timeout); + do { + write_time = jiffies; + + /* + * if there is just one byte to write, we use write byte data. + * This will also protect us against a rollover if there is + * just one byte left to write. + */ + if (count == 1) { + ret_val = i2c_smbus_write_byte_data(i2c_client, offset, + buf[0]); + if (!ret_val) + return 1; + goto err_byte; + } + + switch (drv_data->smb_access) { + case I2C_SMBUS_I2C_BLOCK_DATA: + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + + ret_val = i2c_smbus_write_i2c_block_data(i2c_client, + offset, count, + buf); + if (!ret_val) + return count; + break; + case I2C_SMBUS_WORD_DATA: + word_data = buf[0] | (buf[1] << 8); + + ret_val = i2c_smbus_write_word_data(i2c_client, offset, + word_data); + if (!ret_val) + return 2; + break; + default: + ret_val = i2c_smbus_write_byte_data(i2c_client, offset, + buf[0]); + if (!ret_val) + return 1; + break; + } +err_byte: + usleep_range(600, 1000); + } while (time_before(write_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t men_user_section_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct men_eeprod_data *drv_data = dev_get_drvdata(dev); + int user_section_size = attr->size; + int bytes_written; + ssize_t retval = 0; + + if (off > user_section_size) + return 0; + + if (off + count > user_section_size) + count = user_section_size - off; + + off = OFFSET_TO_USR_SECTION(off); + + mutex_lock(&drv_data->lock); + while (count) { + bytes_written = men_eeprom_write(drv_data, buf, off, count); + + if (bytes_written <= 0) { + if (retval == 0) + retval = bytes_written; + break; + } + + buf += bytes_written; + off += bytes_written; + count -= bytes_written; + retval += bytes_written; + } + mutex_unlock(&drv_data->lock); + + return retval; +} + +static ssize_t +show_eeprod_id(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct men_eeprod_data *drv_data = dev_get_drvdata(dev); + struct eeprom_data *eeprom = &drv_data->eeprom; + + return sprintf(buf, "0x%02x\n", eeprom->eeprod_id); +} + +static ssize_t +show_revision(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct men_eeprod_data *drv_data = dev_get_drvdata(dev); + struct eeprom_data *eeprom = &drv_data->eeprom; + + return sprintf(buf, "%02d.%02d.%02d\n", eeprom->revision[0], + eeprom->revision[1], eeprom->revision[2]); +} + +static ssize_t +show_serialnr(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct men_eeprod_data *drv_data = dev_get_drvdata(dev); + struct eeprom_data *eeprom = &drv_data->eeprom; + + return sprintf(buf, "%d\n", cpu_to_be32(eeprom->serialnr)); +} + +static ssize_t +show_hw_name(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct men_eeprod_data *drv_data = dev_get_drvdata(dev); + struct eeprom_data *eeprom = &drv_data->eeprom; + + return sprintf(buf, "%s%02d\n", eeprom->hw_name, eeprom->board_model); +} + +static ssize_t +show_prod_date(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct men_eeprod_data *drv_data = dev_get_drvdata(dev); + __be16 eeprod_date = drv_data->eeprom.prod_date; + + return sprintf(buf, "%04d-%02d-%02d\n", + eeprod_get_year(eeprod_date), + eeprod_get_month(eeprod_date), + eeprod_get_day(eeprod_date)); +} + +static ssize_t +show_rep_date(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct men_eeprod_data *drv_data = dev_get_drvdata(dev); + __be16 eeprod_date = drv_data->eeprom.rep_date; + + /* + * could be empty if the board was never send back + * to the repair department. + */ + if (eeprod_date == cpu_to_be16(0xffff)) + return -EINVAL; + + return sprintf(buf, "%04d-%02d-%02d\n", + eeprod_get_year(eeprod_date), + eeprod_get_month(eeprod_date), + eeprod_get_day(eeprod_date)); +} + +static DEVICE_ATTR(eeprod_id, S_IRUGO, show_eeprod_id, NULL); +static DEVICE_ATTR(revision, S_IRUGO, show_revision, NULL); +static DEVICE_ATTR(serial, S_IRUGO, show_serialnr, NULL); +static DEVICE_ATTR(hw_name, S_IRUGO, show_hw_name, NULL); +static DEVICE_ATTR(prod_date, S_IRUGO, show_prod_date, NULL); +static DEVICE_ATTR(rep_date, S_IRUGO, show_rep_date, NULL); + +static struct attribute *eeprod_attrs[] = { + &dev_attr_eeprod_id.attr, + &dev_attr_revision.attr, + &dev_attr_serial.attr, + &dev_attr_hw_name.attr, + &dev_attr_prod_date.attr, + &dev_attr_rep_date.attr, + NULL, +}; + +static struct attribute_group eeprod_attr_group = { + .attrs = eeprod_attrs, +}; + +static struct bin_attribute eeprom_user_attr = { + .attr = { + .name = "user_section", + .mode = S_IRUGO | S_IWUSR, + }, + .size = EEPROM_SIZE - sizeof(struct eeprom_data), + .read = men_user_section_read, + .write = men_user_section_write, +}; + +static int men_eeprod_read_prod_data(struct men_eeprod_data *drv_data) +{ + struct eeprom_data *eeprom = &drv_data->eeprom; + uint8_t *eeprom_byte; + int i, ret; + + eeprom_byte = (uint8_t *)eeprom + 1; + + for (i = 1; i < sizeof(*eeprom); i++) { + ret = i2c_smbus_read_byte_data(drv_data->client, i); + if (ret < 0) + return ret; + + *(eeprom_byte++) = ret; + } + return 0; +} + +static int men_eeprod_calc_parity(struct eeprom_data *eeprom) +{ + uint8_t *eeprom_byte; + int parity, len; + + eeprom_byte = (uint8_t *)eeprom + 1; + len = sizeof(*eeprom) - 1; + parity = 0x0f; + + while (len--) { + parity ^= (*eeprom_byte >> 4); + parity ^= (*eeprom_byte) & 0x0f; + eeprom_byte++; + } + + return parity; +} + +static int men_eeprod_i2c_functionality(struct men_eeprod_data *drv_data) +{ + struct i2c_adapter *i2c_adapter = drv_data->client->adapter; + int ret; + + /* + * As the minimum we need read/write byte data + * which every adapter should support + */ + ret = i2c_check_functionality(i2c_adapter, + I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) + return -ENODEV; + + if (i2c_check_functionality(i2c_adapter, + I2C_FUNC_SMBUS_I2C_BLOCK)) { + drv_data->smb_access = I2C_SMBUS_I2C_BLOCK_DATA; + } else if (i2c_check_functionality(i2c_adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + drv_data->smb_access = I2C_SMBUS_WORD_DATA; + } else { + drv_data->smb_access = I2C_SMBUS_BYTE_DATA; + } + + return 0; +} + +static int +men_eeprod_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct men_eeprod_data *drv_data; + int eeprod_id, eeprod_chksum; + int parity, ret; + + drv_data = devm_kzalloc(&client->dev, sizeof(*drv_data), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + drv_data->client = client; + mutex_init(&drv_data->lock); + + i2c_set_clientdata(client, drv_data); + + ret = men_eeprod_i2c_functionality(drv_data); + if (ret) + return ret; + + eeprod_id = i2c_smbus_read_byte_data(client, EEPROM_ID_ADDR); + if (eeprod_id < 0) + return eeprod_id; + + eeprod_chksum = eeprod_id & 0x0f; + eeprod_id >>= 4; + drv_data->eeprom.eeprod_id = eeprod_id; + + if (eeprod_id == EEPROD2_ID) { + dev_info(&client->dev, + "found MEN Board EEPROM. ID: 0x%02x\n", eeprod_id); + } else { + dev_err(&client->dev, + "board eeprom not supported. ID: 0x%02x\n", eeprod_id); + return -ENXIO; + } + + ret = men_eeprod_read_prod_data(drv_data); + if (ret < 0) { + dev_err(&client->dev, "failed to read EEPROM board data\n"); + return ret; + } + + parity = men_eeprod_calc_parity(&drv_data->eeprom); + if (parity != eeprod_chksum) { + dev_err(&client->dev, "checksum error. eeprom in invalid state\n"); + return -EINVAL; + } + + drv_data->user_section = eeprom_user_attr; + ret = sysfs_create_bin_file(&client->dev.kobj, + &drv_data->user_section); + if (ret) { + dev_err(&client->dev, + "failed to create user_section sysfs entry\n"); + return ret; + } + + ret = sysfs_create_group(&client->dev.kobj, &eeprod_attr_group); + if (ret < 0) { + dev_err(&client->dev, "failed to create sysfs entries\n"); + goto err_sysfs; + } + + dev_info(&client->dev, "MEN Board Information EEPROM registered\n"); + + return 0; + +err_sysfs: + sysfs_remove_bin_file(&client->dev.kobj, &drv_data->user_section); + return ret; +} + +static int men_eeprod_remove(struct i2c_client *client) +{ + struct men_eeprod_data *drv_data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &eeprod_attr_group); + sysfs_remove_bin_file(&client->dev.kobj, &drv_data->user_section); + return 0; +} + +static const struct i2c_device_id men_eeprod_ids[] = { + { "men_eeprod" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, men_eeprod_ids); + +static struct i2c_driver men_eeprod_driver = { + .driver = { + .name = "men_eeprod", + .owner = THIS_MODULE, + }, + .probe = men_eeprod_probe, + .remove = men_eeprod_remove, + .id_table = men_eeprod_ids, +}; + +module_i2c_driver(men_eeprod_driver); + +MODULE_DESCRIPTION("MEN Board Information EEPROM driver"); +MODULE_AUTHOR("Andreas Werner "); +MODULE_LICENSE("GPL v2"); -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/