Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752097AbaJPMNX (ORCPT ); Thu, 16 Oct 2014 08:13:23 -0400 Received: from regular1.263xmail.com ([211.150.99.131]:54998 "EHLO regular1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750805AbaJPMNU (ORCPT ); Thu, 16 Oct 2014 08:13:20 -0400 X-263anti-spam: KSV:0; X-MAIL-GRAY: 0 X-MAIL-DELIVERY: 1 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-RL-SENDER: caesar.wang@rock-chips.com X-FST-TO: zhengsq@rock-chips.com X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: caesar.wang@rock-chips.com X-UNIQUE-TAG: <3973291a9c3231385a0b8bef9a3fa94d> X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 Message-ID: <543FB651.8090106@rock-chips.com> Date: Thu, 16 Oct 2014 20:13:05 +0800 From: Caesar Wang User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.1.2 MIME-Version: 1.0 To: Vladimir Zapolskiy , heiko@sntech.de, rui.zhang@intel.com, edubezval@gmail.com, arnd@arndb.de CC: zyf@rock-chips.com, dianders@chromium.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, cf@rock-chips.com, dmitry.torokhov@gmail.com, dbasehore@chromium.org, huangtao@rock-chips.com, cjf@rock-chips.com, zhengsq@rock-chips.com Subject: Re: [PATCH v10 1/5] thermal: rockchip: add driver for thermal References: <1413306608-11498-1-git-send-email-caesar.wang@rock-chips.com> <1413306608-11498-2-git-send-email-caesar.wang@rock-chips.com> <543D6695.7070009@mentor.com> In-Reply-To: <543D6695.7070009@mentor.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Vladimir, 在 2014年10月15日 02:08, Vladimir Zapolskiy 写道: > On 14.10.2014 20:10, Caesar Wang wrote: >> Thermal is TS-ADC Controller module supports >> user-defined mode and automatic mode. >> >> User-defined mode refers,TSADC all the control signals entirely by >> software writing to register for direct control. >> >> Automaic mode refers to the module automatically poll TSADC output, >> and the results were checked.If you find that the temperature High >> in a period of time,an interrupt is generated to the processor >> down-measures taken;If the temperature over a period of time High, >> the resulting TSHUT gave CRU module,let it reset the entire chip, >> or via GPIO give PMIC. >> >> Signed-off-by: zhaoyifeng >> Signed-off-by: Caesar Wang >> --- >> drivers/thermal/Kconfig | 9 + >> drivers/thermal/Makefile | 1 + >> drivers/thermal/rockchip_thermal.c | 667 >> +++++++++++++++++++++++++++++++++++++ >> 3 files changed, 677 insertions(+) >> create mode 100644 drivers/thermal/rockchip_thermal.c >> >> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig >> index ef5587f..5efcf73 100644 >> --- a/drivers/thermal/Kconfig >> +++ b/drivers/thermal/Kconfig >> @@ -133,6 +133,15 @@ config SPEAR_THERMAL >> Enable this to plug the SPEAr thermal sensor driver into the >> Linux >> thermal framework. >> >> +config ROCKCHIP_THERMAL >> + tristate "Rockchip thermal driver" >> + depends on ARCH_ROCKCHIP >> + help >> + Rockchip thermal driver provides support for Temperature sensor >> + ADC (TS-ADC) found on Rockchip SoCs. It supports one critical >> + trip point. Cpufreq is used as the cooling device and will >> throttle >> + CPUs when the Temperature crosses the passive trip point. >> + >> config RCAR_THERMAL >> tristate "Renesas R-Car thermal driver" >> depends on ARCH_SHMOBILE || COMPILE_TEST >> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile >> index 31e232f..21da0a8 100644 >> --- a/drivers/thermal/Makefile >> +++ b/drivers/thermal/Makefile >> @@ -19,6 +19,7 @@ thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o >> >> # platform thermal drivers >> obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o >> +obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o >> obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o >> obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o >> obj-y += samsung/ >> diff --git a/drivers/thermal/rockchip_thermal.c >> b/drivers/thermal/rockchip_thermal.c >> new file mode 100644 >> index 0000000..926611b >> --- /dev/null >> +++ b/drivers/thermal/rockchip_thermal.c >> @@ -0,0 +1,667 @@ >> +/* >> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd >> + * >> + * This program is free software; you can redistribute it and/or >> modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope it will be useful, but >> WITHOUT >> + * ANY WARRANTY; without even the implied warranty of >> MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public >> License for >> + * more details. >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +/** >> + * If the temperature over a period of time High, >> + * the resulting TSHUT gave CRU module,let it reset the entire chip, >> + * or via GPIO give PMIC. >> + */ >> +enum reset_mode { >> + CRU = 0, >> + GPIO, >> +}; >> + >> +/** >> + * The system has three Teperture Sensors. >> + * channel0 is reserve,channel1 is for CPU,and >> + * channel channel 2 is for GPU. >> + */ >> +enum sensor_id { >> + RESERVE = 0, >> + CPU, >> + GPU, >> + SENSOR_ID_END, >> +}; >> + >> +struct rockchip_thermal_data { >> + const struct rockchip_tsadc_platform_data *pdata; >> + struct thermal_zone_device *tz[SENSOR_ID_END]; >> + struct thermal_cooling_device *cdev; >> + void __iomem *regs; >> + >> + unsigned long temp_passive; >> + unsigned long hw_shut_temp; >> + unsigned long alarm_temp; >> + bool irq_enabled; >> + int irq; >> + int reset_mode; >> + int chn; >> + >> + struct clk *clk; >> + struct clk *pclk; >> +}; >> + >> +struct rockchip_tsadc_platform_data { >> + unsigned long temp_passive; >> + unsigned long hw_shut_temp; >> + int reset_mode; >> + >> + void (*irq_handle)(void __iomem *reg); >> + void (*initialize)(int reset_mode, int chn, void __iomem *reg, >> + unsigned long hw_shut_temp); >> + int (*control)(void __iomem *reg, bool on); >> + int (*code_to_temp)(u32 code); >> + u32 (*temp_to_code)(int temp); >> + void (*set_alarm_temp)(int chn, void __iomem *reg, >> + unsigned long alarm_temp); >> +}; >> + >> +/* TSADC V2 Sensor info define: */ >> +#define TSADCV2_AUTO_CON 0x04 >> +#define TSADCV2_INT_EN 0x08 >> +#define TSADCV2_INT_PD 0x0c >> +#define TSADCV2_DATA(chn) (0x20 + (chn) * 0x04) >> +#define TSADCV2_COMP_INT(chn) (0x30 + (chn) * 0x04) >> +#define TSADCV2_COMP_SHUT(chn) (0x40 + (chn) * 0x04) >> +#define TSADCV2_HIGHT_INT_DEBOUNCE 0x60 >> +#define TSADCV2_HIGHT_TSHUT_DEBOUNCE 0x64 >> +#define TSADCV2_AUTO_PERIOD 0x68 >> +#define TSADCV2_AUTO_PERIOD_HT 0x6c >> + >> +#define TSADCV2_AUTO_EN BIT(0) >> +#define TSADCV2_AUTO_DISABLE ~BIT(0) >> +#define TSADCV2_AUTO_SRC_EN(chn) (0xf << (4 + chn)) >> +#define TSADCV2_AUTO_TSHUT_POLARITY_HIGH BIT(8) >> +#define TSADCV2_AUTO_TSHUT_POLARITY_LOW ~BIT(8) >> + >> +#define TSADCV2_INT_SRC_EN(chn) BIT(chn) >> +#define TSADCV2_SHUT_2GPIO_SRC_EN(chn) (0xf << (4 + chn)) >> +#define TSADCV2_SHUT_2CRU_SRC_EN(chn) (0xf << (8 + chn)) >> + >> +#define TSADCV2_INT_PD_CLEAR ~BIT(8) >> + >> +#define TSADCV2_DATA_MASK 0xfff >> +#define TSADCV2_HIGHT_INT_DEBOUNCE_TIME 0x0a >> +#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_TIME 0x0a >> +#define TSADCV2_AUTO_PERIOD_TIME 0x03e8 >> +#define TSADCV2_AUTO_PERIOD_HT_TIME 0x64 >> + >> +struct tsadc_table { >> + unsigned long code; >> + int temp; >> +}; >> + >> +static const struct tsadc_table v2_code_table[] = { >> + {TSADCV2_DATA_MASK, -40000}, >> + {3800, -40000}, >> + {3792, -35000}, >> + {3783, -30000}, >> + {3774, -25000}, >> + {3765, -20000}, >> + {3756, -15000}, >> + {3747, -10000}, >> + {3737, -5000}, >> + {3728, 0}, >> + {3718, 5000}, >> + {3708, 10000}, >> + {3698, 15000}, >> + {3688, 20000}, >> + {3678, 25000}, >> + {3667, 30000}, >> + {3656, 35000}, >> + {3645, 40000}, >> + {3634, 45000}, >> + {3623, 50000}, >> + {3611, 55000}, >> + {3600, 60000}, >> + {3588, 65000}, >> + {3575, 70000}, >> + {3563, 75000}, >> + {3550, 80000}, >> + {3537, 85000}, >> + {3524, 90000}, >> + {3510, 95000}, >> + {3496, 100000}, >> + {3482, 105000}, >> + {3467, 110000}, >> + {3452, 115000}, >> + {3437, 120000}, >> + {3421, 125000}, >> + {0, 125000}, >> +}; >> + >> +static void rk_tsadcv2_irq_handle(void __iomem *regs) >> +{ >> + u32 val; >> + >> + val = readl_relaxed(regs + TSADCV2_INT_PD); >> + writel_relaxed(val & TSADCV2_INT_PD_CLEAR, regs + TSADCV2_INT_PD); >> +} >> + >> +static u32 rk_tsadcv2_temp_to_code(int temp) >> +{ >> + int high, low, mid; >> + >> + low = 0; >> + high = ARRAY_SIZE(v2_code_table) - 1; >> + mid = (high + low) / 2; >> + >> + if (temp < v2_code_table[low].temp || temp > >> v2_code_table[high].temp) >> + return 0; >> + >> + while (low <= high) { >> + if (temp == v2_code_table[mid].temp) >> + return v2_code_table[mid].code; >> + else if (temp < v2_code_table[mid].temp) >> + high = mid - 1; >> + else >> + low = mid + 1; >> + mid = (low + high) / 2; >> + } >> + >> + return 0; >> +} >> + >> +static int rk_tsadcv2_code_to_temp(u32 code) >> +{ >> + int high, low, mid; >> + >> + low = 0; >> + high = ARRAY_SIZE(v2_code_table) - 1; >> + mid = (high + low) / 2; >> + >> + if (code > v2_code_table[low].code || code < >> v2_code_table[high].code) >> + return 125000; /* No code available,return max temperture */ >> + >> + while (low <= high) { >> + if (code >= v2_code_table[mid].code && code < >> + v2_code_table[mid - 1].code) >> + return v2_code_table[mid].temp; >> + else if (code < v2_code_table[mid].code) >> + low = mid + 1; >> + else >> + high = mid - 1; >> + mid = (low + high) / 2; >> + } >> + >> + return 125000; >> +} >> + >> +/** >> + * rk_tsadcv2_get_tshut_polarity_high - get the tshut polarity high >> + * the bit 8 is tshut polarity. >> + * 0: low active, 1: high active >> + */ >> +static bool rk_tsadcv2_get_tshut_polarity_high(void __iomem *regs) >> +{ >> + u32 val; >> + bool tshut_polarity; >> + >> + val = readl_relaxed(regs + TSADCV2_AUTO_CON); >> + tshut_polarity = (val & TSADCV2_AUTO_TSHUT_POLARITY_HIGH) ? true : >> + false; >> + >> + return tshut_polarity; >> +} >> + >> +/** >> + * rk_tsadcv2_initialize - init configure for TASDC Controller >> + * with the following step: >> + * (1) Set TSADCV2_AUTO_PERIOD, configure the interleave between >> every two >> + * accessing of TSADC in normal operation. >> + * (2) Set TSADCV2_AUTO_PERIOD_HT, configure the interleave between >> every >> + * two accessing of TSADC after the temperature is higher than COM_SHUT >> + * or COM_INT. >> + * (3) Set TSADCV2_COMn_SHUT(chn),configure the super high >> temperature level, >> + * if tsadc output is smaller than the value, means the temperature >> is too >> + * high, TSHUT will be asserted. >> + * (4) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE, >> if the >> + * temperature is higher than COMP_INT or COMP_SHUT for "debounce" >> times, >> + * TSADC controller will generate interrupt or TSHUT. >> + * (5) Set TSADCV2_INT_EN,you can enable the high temperature >> interrupt for >> + * the channel, and you can set TSHUT output to gpio to reset the >> whole chip; >> + * and you can set TSHUT output to cru to reset the whole chip. >> + * (6) sET tsadc_auto_con, enable the TSADC controller. >> + */ >> +static void rk_tsadcv2_initialize(int reset_mode, int chn, void >> __iomem *regs, >> + unsigned long hw_shut_temp) >> +{ >> + u32 shutdown_value; >> + bool tshut_polarity; >> + >> + shutdown_value = rk_tsadcv2_temp_to_code(hw_shut_temp); >> + tshut_polarity = rk_tsadcv2_get_tshut_polarity_high(regs); >> + >> + writel_relaxed(0, regs + TSADCV2_AUTO_CON); >> + writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + >> TSADCV2_AUTO_PERIOD); >> + writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME, regs + >> + TSADCV2_AUTO_PERIOD_HT); >> + writel_relaxed(shutdown_value, regs + TSADCV2_COMP_SHUT(chn)); >> + writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_TIME, regs + >> + TSADCV2_HIGHT_INT_DEBOUNCE); >> + writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_TIME, regs + >> + TSADCV2_HIGHT_TSHUT_DEBOUNCE); >> + >> + if (reset_mode == GPIO) >> + writel_relaxed(TSADCV2_SHUT_2GPIO_SRC_EN(chn) | >> + TSADCV2_INT_SRC_EN(chn), regs + >> + TSADCV2_INT_EN); >> + else >> + writel_relaxed(TSADCV2_SHUT_2CRU_SRC_EN(chn) | >> + TSADCV2_INT_SRC_EN(chn), regs + >> + TSADCV2_INT_EN); >> + >> + if (tshut_polarity) >> + writel_relaxed(TSADCV2_AUTO_EN | (TSADCV2_AUTO_SRC_EN(chn) & >> + TSADCV2_AUTO_TSHUT_POLARITY_HIGH), regs + >> + TSADCV2_AUTO_CON); >> + else >> + writel_relaxed(TSADCV2_AUTO_EN | (TSADCV2_AUTO_SRC_EN(chn) & >> + TSADCV2_AUTO_TSHUT_POLARITY_LOW), regs + >> + TSADCV2_AUTO_CON); >> +} >> + >> +static int rk_tsadcv2_control(void __iomem *regs, bool on) >> +{ >> + u32 val; >> + >> + if (on) { >> + val = readl_relaxed(regs + TSADCV2_AUTO_CON); >> + writel_relaxed(val | TSADCV2_AUTO_EN, regs + TSADCV2_AUTO_CON); >> + } else { >> + val = readl_relaxed(regs + TSADCV2_AUTO_CON); >> + writel_relaxed(val & TSADCV2_AUTO_DISABLE, >> + regs + TSADCV2_AUTO_CON); >> + } >> + >> + return 0; >> +} >> + >> +static void rk_tsadcv2_alarm_temp(int chn, void __iomem *regs, >> + unsigned long alarm_temp) >> +{ >> + u32 alarm_value; >> + >> + alarm_value = rk_tsadcv2_temp_to_code(alarm_temp); >> + >> + writel_relaxed(alarm_value & TSADCV2_DATA_MASK, regs + >> + TSADCV2_COMP_INT(chn)); >> +} >> + >> +static const struct rockchip_tsadc_platform_data rk3288_tsadc_data = { >> + .reset_mode = GPIO, /* default TSHUT via GPIO give PMIC */ >> + .temp_passive = 80000, >> + .hw_shut_temp = 120000, >> + .irq_handle = rk_tsadcv2_irq_handle, >> + .initialize = rk_tsadcv2_initialize, >> + .control = rk_tsadcv2_control, >> + .code_to_temp = rk_tsadcv2_code_to_temp, >> + .temp_to_code = rk_tsadcv2_temp_to_code, >> + .set_alarm_temp = rk_tsadcv2_alarm_temp, >> +}; >> + >> +static const struct of_device_id of_rockchip_thermal_match[] = { >> + { >> + .compatible = "rockchip,rk3288-tsadc", >> + .data = (void *)&rk3288_tsadc_data, >> + }, >> + { /* end */ }, >> +}; >> +MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match); >> + >> +static void rockchip_set_alarm_temp(struct rockchip_thermal_data *data, >> + int alarm_temp) >> +{ >> + const struct rockchip_tsadc_platform_data *tsadc = data->pdata; >> + >> + data->alarm_temp = alarm_temp; >> + if (tsadc->set_alarm_temp) >> + tsadc->set_alarm_temp(data->chn, data->regs, alarm_temp); >> +} >> + >> +static int rockchip_thermal_initialize(struct rockchip_thermal_data >> *data) >> +{ >> + const struct rockchip_tsadc_platform_data *tsadc = data->pdata; >> + >> + if (data->chn == RESERVE) >> + return 0; >> + >> + tsadc->initialize(tsadc->reset_mode, data->chn, data->regs, >> + data->hw_shut_temp); >> + >> + rockchip_set_alarm_temp(data, data->temp_passive); >> + >> + return 0; >> +} >> + >> +static void rockchip_thermal_control(struct rockchip_thermal_data >> *data, >> + bool on) >> +{ >> + const struct rockchip_tsadc_platform_data *tsadc = data->pdata; >> + >> + if (tsadc->control) >> + tsadc->control(data->regs, on); >> + >> + if (on) { >> + data->irq_enabled = true; >> + data->tz[data->chn]->ops->set_mode(data->tz[data->chn], >> + THERMAL_DEVICE_ENABLED); >> + } else { >> + data->irq_enabled = false; >> + data->tz[data->chn]->ops->set_mode(data->tz[data->chn], >> + THERMAL_DEVICE_DISABLED); >> + } >> +} >> + >> +static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void >> *dev) >> +{ >> + struct rockchip_thermal_data *data = dev; >> + const struct rockchip_tsadc_platform_data *tsadc = data->pdata; >> + int chn; >> + >> + tsadc->irq_handle(data->regs); >> + >> + for (chn = CPU; chn < SENSOR_ID_END; chn++) >> + thermal_zone_device_update(data->tz[chn]); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int rockchip_thermal_set_trips(void *zone, long low, long high) >> +{ >> + struct rockchip_thermal_data *data = zone; >> + const struct rockchip_tsadc_platform_data *tsadc = data->pdata; >> + >> + low = clamp_val(low, LONG_MIN, LONG_MAX); >> + high = clamp_val(high, LONG_MIN, LONG_MAX); >> + >> + /* channel0 is RESERVE, not need to set trips*/ >> + if (data->chn == RESERVE) >> + return 0; >> + >> + /* Update alarm value to next higher trip point */ >> + if (data->alarm_temp == data->temp_passive && high <= >> + tsadc->temp_to_code(data->temp_passive)) >> + high = data->hw_shut_temp; >> + >> + if (data->alarm_temp >= data->temp_passive && high > >> + tsadc->temp_to_code(data->temp_passive)) { >> + high = data->temp_passive; >> + } >> + >> + return 0; >> +} >> + >> +static int rockchip_thermal_get_temp(void *zone, long *out_temp) >> +{ >> + struct rockchip_thermal_data *data = zone; >> + const struct rockchip_tsadc_platform_data *tsadc = data->pdata; >> + u32 val; >> + >> + if (data->chn == RESERVE) >> + return 0; >> + >> + /* the A/D value of the channel last conversion need some time */ >> + val = readl_relaxed(data->regs + TSADCV2_DATA(data->chn)); >> + if (val == 0) >> + return -EPROBE_DEFER; >> + >> + *out_temp = tsadc->code_to_temp(val); >> + >> + return 0; >> +} >> + >> +static int rockchip_configure_from_dt(struct device *dev, >> + struct device_node *np, >> + struct rockchip_thermal_data *data) >> +{ >> + int shut_temp, reset_mode; >> + >> + if (of_property_read_u32(np, "hw-shut-temp", &shut_temp)) { >> + dev_warn(dev, "Missing default shutdown temp property\n"); >> + data->hw_shut_temp = data->pdata->hw_shut_temp; >> + } else { >> + data->hw_shut_temp = shut_temp; >> + } >> + >> + if (of_property_read_u32(np, "tsadc-ht-reset-mode", &reset_mode)) { >> + dev_warn(dev, "Missing default reset mode property\n"); >> + data->reset_mode = data->pdata->reset_mode; >> + } else { >> + data->reset_mode = reset_mode; >> + } >> + >> + data->temp_passive = data->pdata->temp_passive; >> + >> + return 0; >> +} >> + >> +static int rockchip_thermal_probe(struct platform_device *pdev) >> +{ >> + struct rockchip_thermal_data *data; >> + const struct rockchip_tsadc_platform_data *tsadc; >> + const struct of_device_id *match; >> + >> + struct cpumask clip_cpus; >> + struct resource *res; >> + struct device_node *np = pdev->dev.of_node; >> + >> + int ret, err, chn; >> + >> + data = devm_kzalloc(&pdev->dev, sizeof(struct >> rockchip_thermal_data), >> + GFP_KERNEL); >> + if (!data) >> + return -ENOMEM; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + data->regs = devm_ioremap_resource(&pdev->dev, res); >> + if (IS_ERR(data->regs)) { >> + dev_err(&pdev->dev, "Could not get tsadc source, %p\n", >> + data->regs); >> + return PTR_ERR(data->regs); >> + } >> + >> + match = of_match_node(of_rockchip_thermal_match, np); >> + if (!match) >> + return -ENXIO; >> + data->pdata = (const struct rockchip_tsadc_platform_data >> *)match->data; >> + if (!data->pdata) >> + return -EINVAL; >> + tsadc = data->pdata; >> + >> + data->clk = devm_clk_get(&pdev->dev, "tsadc"); >> + if (IS_ERR(data->clk)) { >> + dev_err(&pdev->dev, "failed to get tsadc clock\n"); >> + return PTR_ERR(data->clk); >> + } >> + >> + data->pclk = devm_clk_get(&pdev->dev, "apb_pclk"); >> + if (IS_ERR(data->pclk)) { >> + dev_err(&pdev->dev, "failed to get tsadc pclk\n"); >> + return PTR_ERR(data->pclk); >> + } >> + >> + /** >> + * Use a default of 10KHz for the converter clock. >> + * This may become user-configurable in the future. >> + * Need to judge the data->clk is Divided by xin32k. >> + * Need to retry it if the pmic hasn't output the xin32k. >> + */ >> + if (clk_get_rate(data->clk) == 0) >> + return -EPROBE_DEFER; >> + ret = clk_set_rate(data->clk, 10000); >> + if (ret < 0) { >> + dev_err(&pdev->dev, "failed to set tsadc clk rate, %d\n", ret); >> + return ret; >> + } >> + >> + ret = clk_prepare_enable(data->clk); >> + if (ret < 0) { >> + dev_err(&pdev->dev, "failed to enable converter clock\n"); >> + goto err_clk; >> + } >> + >> + ret = clk_prepare_enable(data->pclk); >> + if (ret < 0) { >> + dev_err(&pdev->dev, "failed to enable pclk\n"); >> + goto err_pclk; >> + } >> + >> + cpumask_set_cpu(0, &clip_cpus); >> + data->cdev = of_cpufreq_cooling_register(np, &clip_cpus); >> + if (IS_ERR(data->cdev)) { >> + dev_err(&pdev->dev, "failed to register cpufreq cooling >> device\n"); >> + goto disable_clk; >> + } >> + >> + data->irq = platform_get_irq(pdev, 0); >> + if (data->irq < 0) { >> + dev_err(&pdev->dev, "no irq resource?\n"); >> + goto disable_clk; > > From here goto cpufreq_cooling_unregister() line. > Fixed. >> + } >> + >> + ret = devm_request_threaded_irq(&pdev->dev, data->irq, NULL, >> + &rockchip_thermal_alarm_irq_thread, >> + IRQF_ONESHOT, "rockchip_thermal", >> + data); >> + if (ret < 0) { >> + dev_err(&pdev->dev, >> + "failed to request tsadc irq: %d\n", ret); >> + goto disable_clk; > > Same as above. > Ditto. >> + } >> + >> + ret = rockchip_configure_from_dt(&pdev->dev, np, data); >> + if (ret) >> + dev_err(&pdev->dev, "Parsing device tree data error.\n"); >> + >> + /* The system three Teperture Sensors be registered */ >> + for (chn = RESERVE; chn < SENSOR_ID_END; chn++) { >> + data->chn = chn; >> + >> + data->tz[chn] = thermal_zone_of_sensor_register( >> + &pdev->dev, data->chn, >> + data, rockchip_thermal_get_temp, >> + NULL, >> + rockchip_thermal_set_trips); >> + if (IS_ERR(data->tz[chn])) { >> + err = PTR_ERR(data->tz[chn]); >> + dev_err(&pdev->dev, "failed to register sensor: %d\n", >> + err); >> + chn--; >> + goto unregister_tzs; >> + } >> + >> + platform_set_drvdata(pdev, data); > > Why is platform_set_drvdata() called in the loop? Both pointers are > fixed. > Ditto. >> + >> + rockchip_thermal_initialize(data); >> + rockchip_thermal_control(data, true); > > It looks like "data->chn" is fixed all over the core and I guess it is > (SENSOR_ID_END-1). The whole "data->chn" idea is broken wherever you > it here in the driver's code. > It seemed to... Fixed. Thanks your comments. >> + } >> + return 0; >> + >> +unregister_tzs: >> + for (; chn >= RESERVE; chn--) >> + thermal_zone_of_sensor_unregister(&pdev->dev, data->tz[chn]); >> + cpufreq_cooling_unregister(data->cdev); >> + >> +disable_clk: >> +err_pclk: >> + clk_disable_unprepare(data->pclk); >> +err_clk: >> + clk_disable_unprepare(data->clk); >> + >> + return ret; >> +} >> + >> +static int rockchip_thermal_remove(struct platform_device *pdev) >> +{ >> + struct rockchip_thermal_data *data = platform_get_drvdata(pdev); >> + >> + rockchip_thermal_control(data, false); >> + >> + for (; data->chn >= RESERVE; data->chn--) >> + thermal_zone_of_sensor_unregister(&pdev->dev, >> + data->tz[data->chn]); >> + cpufreq_cooling_unregister(data->cdev); >> + >> + clk_disable_unprepare(data->clk); >> + clk_disable_unprepare(data->pclk); >> + >> + return 0; >> +} >> + >> +#ifdef CONFIG_PM_SLEEP >> +static int rockchip_thermal_suspend(struct device *dev) >> +{ >> + struct platform_device *pdev = to_platform_device(dev); >> + struct rockchip_thermal_data *data = platform_get_drvdata(pdev); >> + >> + rockchip_thermal_control(data, false); >> + >> + clk_disable(data->clk); >> + clk_disable(data->pclk); >> + >> + return 0; >> +} >> + >> +static int rockchip_thermal_resume(struct device *dev) >> +{ >> + struct platform_device *pdev = to_platform_device(dev); >> + struct rockchip_thermal_data *data = platform_get_drvdata(pdev); >> + int ret; >> + >> + ret = clk_enable(data->pclk); >> + if (ret) >> + return ret; >> + >> + ret = clk_enable(data->clk); >> + if (ret) >> + return ret; >> + >> + rockchip_thermal_initialize(data); >> + rockchip_thermal_control(data, true); >> + >> + return 0; >> +} >> +#endif >> + >> +static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops, >> + rockchip_thermal_suspend, rockchip_thermal_resume); >> + >> +static struct platform_driver rockchip_thermal_driver = { >> + .driver = { >> + .name = "rockchip-thermal", >> + .owner = THIS_MODULE, >> + .pm = &rockchip_thermal_pm_ops, >> + .of_match_table = of_rockchip_thermal_match, >> + }, >> + .probe = rockchip_thermal_probe, >> + .remove = rockchip_thermal_remove, >> +}; >> + >> +module_platform_driver(rockchip_thermal_driver); >> + >> +MODULE_DESCRIPTION("ROCKCHIP THERMAL Driver"); >> +MODULE_AUTHOR("Rockchip, Inc."); >> +MODULE_LICENSE("GPL v2"); >> +MODULE_ALIAS("platform:rockchip-thermal"); >> > > > > -- Best regards, Caesar -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/