Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752576AbaJPODj (ORCPT ); Thu, 16 Oct 2014 10:03:39 -0400 Received: from ns.mm-sol.com ([37.157.136.199]:52246 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752205AbaJPODg (ORCPT ); Thu, 16 Oct 2014 10:03:36 -0400 Message-ID: <1413468225.6148.19.camel@mm-sol.com> Subject: Re: [PATCH v3] thermal: Add QPNP PMIC temperature alarm driver From: "Ivan T. Ivanov" To: Zhang Rui , Eduardo Valentin Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Grant Likely , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, David Collins Date: Thu, 16 Oct 2014 17:03:45 +0300 In-Reply-To: <1412178817-20371-1-git-send-email-iivanov@mm-sol.com> References: <1412178817-20371-1-git-send-email-iivanov@mm-sol.com> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.13.5-fta1 Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org No responses. Probably because maintainers are in CC: and not in To:, fixing this. Ivan On Wed, 2014-10-01 at 18:53 +0300, Ivan T. Ivanov wrote: > Add support for the temperature alarm peripheral found inside > Qualcomm plug-and-play (QPNP) PMIC chips. The temperature alarm > peripheral outputs a pulse on an interrupt line whenever the > thermal over temperature stage value changes. Implement an ISR > to manage this interrupt. > > Register a thermal zone device in sysfs with multiple trip points > corresponding to the physical threshold temperatures between over > temperature stages. The temperature reported by this thermal > zone device should reflect the actual PMIC die temperature if an > ADC is present on the given PMIC. If no ADC is present, then the > reported temperature should be estimated from the over > temperature stage value. > > Send a notification to userspace via sysfs_notify() whenever the > over temperature stage value changes. > > Cc: David Collins > Signed-off-by: Ivan T. Ivanov > --- > > Changes since v2: > > - Fixed review comments from Kiran Padwal > - Files renamed from qpnp-* to qcom-spmi-* to be inline with > other PMIC sub-function drivers like qcom-spmi-iadc and > qcom-spmi-vadc. > > v2: http://www.gossamer-threads.com/lists/linux/kernel/2017366 > > .../bindings/thermal/qcom-spmi-temp-alarm.txt | 26 ++ > drivers/thermal/Kconfig | 13 + > drivers/thermal/Makefile | 1 + > drivers/thermal/qcom-spmi-temp-alarm.c | 517 > +++++++++++++++++++++ > 4 files changed, 557 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt > create mode 100644 drivers/thermal/qcom-spmi-temp-alarm.c > > diff --git > a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt > b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt > new file mode 100644 > index 0000000..afa908c > --- /dev/null > +++ > b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt > @@ -0,0 +1,26 @@ > +Qualcomm QPNP PMIC Temperature Alarm > + > +QPNP temperature alarm peripherals are found inside of Qualcomm > PMIC chips > +that utilize the Qualcomm SPMI implementation. These peripherals > provide an > +interrupt signal and status register to identify high PMIC die > temperature. > + > +Required properties: > +- compatible: Should contain "qcom,spmi-temp-alarm". > +- reg: Specifies the SPMI address and length of the > controller's > + registers. > +- interrupts: PMIC temperature alarm interrupt > + > +Optional properties: > +- io-channels: Should contain IIO channel specifier for the ADC > channel, > + which report chip die temperature. > +- io-channel-names: Should contain "thermal". > + > +Example: > + > +       thermal-alarm@2400 { > + compatible = "qcom,spmi-temp-alarm"; > + reg = <0x2400 0x100>; > + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; > + io-channels = <&pm8941_vadc VADC_DIE_TEMP>; > + io-channel-names = "thermal"; > + }; > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 693208e..6adb661 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -248,4 +248,17 @@ depends on ARCH_STI && OF > source "drivers/thermal/st/Kconfig" > endmenu > > +config QCOM_SPMI_TEMP_ALARM > + tristate "Qualcomm SPMI PMIC Temperature Alarm" > + depends on OF && SPMI && IIO > + select REGMAP_SPMI > + help > + This enables a thermal sysfs driver for Qualcomm > plug-and-play (QPNP) > + PMIC devices. It shows up in sysfs as a thermal zone with > multiple > + trip points. The temperature reported by the thermal zone > reflects the > + real time die temperature if an ADC is present or an > estimate of the > + temperature based upon the over temperature stage value. > Enabling the > + thermal zone device via the mode file results in shifting > PMIC over > + temperature shutdown control from hardware to software. > + > endif > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > index 31e232f..55f6c23 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -33,3 +33,4 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += > intel_soc_dts_thermal.o > obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ > obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o > obj-$(CONFIG_ST_THERMAL) += st/ > +obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o > diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c > b/drivers/thermal/qcom-spmi-temp-alarm.c > new file mode 100644 > index 0000000..5ce0fef > --- /dev/null > +++ b/drivers/thermal/qcom-spmi-temp-alarm.c > @@ -0,0 +1,517 @@ > +/* > + * Copyright (c) 2011-2014, The Linux Foundation. All rights > reserved. > + * > + * This program is free software; you can redistribute it and/or > modify > + * it under the terms of the GNU General Public License version 2 > and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define QPNP_TM_REG_TYPE 0x04 > +#define QPNP_TM_REG_SUBTYPE 0x05 > +#define QPNP_TM_REG_STATUS 0x08 > +#define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40 > +#define QPNP_TM_REG_SHUTDOWN_CTRL2 0x42 > +#define QPNP_TM_REG_ALARM_CTRL 0x46 > + > +#define QPNP_TM_TYPE 0x09 > +#define QPNP_TM_SUBTYPE 0x08 > + > +#define STATUS_STAGE_MASK 0x03 > + > +#define SHUTDOWN_CTRL1_OVERRIDE_STAGE3 0x80 > +#define SHUTDOWN_CTRL1_OVERRIDE_STAGE2 0x40 > +#define SHUTDOWN_CTRL1_THRESHOLD_MASK 0x03 > + > +#define SHUTDOWN_CTRL2_CLEAR_STAGE3 0x80 > +#define SHUTDOWN_CTRL2_CLEAR_STAGE2 0x40 > + > +#define ALARM_CTRL_FORCE_ENABLE 0x80 > +#define ALARM_CTRL_FOLLOW_HW_ENABLE 0x01 > + > +/* > + * Trip point values based on threshold control > + * 0 = {105 C, 125 C, 145 C} > + * 1 = {110 C, 130 C, 150 C} > + * 2 = {115 C, 135 C, 155 C} > + * 3 = {120 C, 140 C, 160 C} > +*/ > +#define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */ > +#define TEMP_STAGE_HYSTERESIS 2000 > + > +#define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */ > +#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */ > + > +#define THRESH_MIN 0 > +#define THRESH_MAX 3 > + > +/* Trip points from most critical to least critical */ > +#define TRIP_STAGE3 0 > +#define TRIP_STAGE2 1 > +#define TRIP_STAGE1 2 > +#define TRIP_NUM 3 > + > +/* Delay between TEMP_STAT IRQ going high and status value changing > in ms */ > +#define READ_DELAY_MS 40 > + > +/* Temperature in Milli Celsius reported during stage 0 if no ADC > is present */ > +#define DEFAULT_TEMP 37000 > + > +struct qpnp_tm_chip { > + struct delayed_workwork; > + struct regmap*map; > + struct device*dev; > + struct thermal_zone_device*tz_dev; > + enum thermal_device_modemode; > + long temp; > + unsigned intthresh; > + unsigned intstage; > + unsigned intprev_stage; > + unsigned intbase; > + struct iio_channel*adc; > +}; > + > +static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 > *data) > +{ > + unsigned int val; > + int ret; > + > + ret = regmap_read(chip->map, chip->base + addr, &val); > + if (ret < 0) > + return ret; > + > + *data = val; > + return 0; > +} > + > +static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 > data) > +{ > + return regmap_write(chip->map, chip->base + addr, data); > +} > + > +static int qpnp_tm_shutdown_override(struct qpnp_tm_chip *chip, > bool enable) > +{ > + u8 reg; > + > + reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK; > + > + if (enable) { > + reg |= SHUTDOWN_CTRL1_OVERRIDE_STAGE2; > + reg |= SHUTDOWN_CTRL1_OVERRIDE_STAGE3; > + } > + > + return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); > +} > + > +/* > + * This function updates the internal temp value based on the > + * current thermal stage and threshold as well as the previous stage > + */ > +static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) > +{ > + unsigned int stage; > + int ret; > + u8 reg = 0; > + > + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); > + if (ret < 0) > + return ret; > + > + stage = reg & STATUS_STAGE_MASK; > + > + if (stage > chip->stage) { > + /* increasing stage, use lower bound */ > + chip->temp = (stage - 1) * TEMP_STAGE_STEP + > + chip->thresh * TEMP_THRESH_STEP + > + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; > + } else if (stage < chip->stage) { > + /* decreasing stage, use upper bound */ > + chip->temp = stage * TEMP_STAGE_STEP + > + chip->thresh * TEMP_THRESH_STEP - > + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; > + } > + > + chip->stage = stage; > + > + return 0; > +} > + > +static int qpnp_tz_get_temp(struct thermal_zone_device *thermal, > + unsigned long *temp) > +{ > + struct qpnp_tm_chip *chip = thermal->devdata; > + int ret, mili_celsius; > + > + if (!temp) > + return -EINVAL; > + > + if (IS_ERR(chip->adc)) { > + ret = qpnp_tm_update_temp_no_adc(chip); > + if (ret < 0) > + return ret; > + } else { > + ret = iio_read_channel_processed(chip->adc, &mili_celsius); > + if (ret < 0) > + return ret; > + > + chip->temp = mili_celsius; > + } > + > + *temp = chip->temp < 0 ? 0 : chip->temp; > + > + return 0; > +} > + > +static int qpnp_tz_get_mode(struct thermal_zone_device *thermal, > + enum thermal_device_mode *mode) > +{ > + struct qpnp_tm_chip *chip = thermal->devdata; > + > + if (!mode) > + return -EINVAL; > + > + *mode = chip->mode; > + > + return 0; > +} > + > +static int qpnp_tz_set_mode(struct thermal_zone_device *thermal, > + enum thermal_device_mode mode) > +{ > + struct qpnp_tm_chip *chip = thermal->devdata; > + int ret; > + > + if (mode == chip->mode) > + return 0; > + > + if (mode == THERMAL_DEVICE_ENABLED) > + ret = qpnp_tm_shutdown_override(chip, true); > + else > + ret = qpnp_tm_shutdown_override(chip, false); > + > + chip->mode = mode; > + > + return ret; > +} > + > +static int qpnp_tz_get_trip_type(struct thermal_zone_device > *thermal, int trip, > + enum thermal_trip_type *type) > +{ > + if (trip < 0 || !type) > + return -EINVAL; > + > + switch (trip) { > + case TRIP_STAGE3: > + *type = THERMAL_TRIP_CRITICAL; > + break; > + case TRIP_STAGE2: > + *type = THERMAL_TRIP_HOT; > + break; > + case TRIP_STAGE1: > + *type = THERMAL_TRIP_HOT; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int qpnp_tz_get_trip_temp(struct thermal_zone_device > *thermal, int trip, > + unsigned long *temp) > +{ > + struct qpnp_tm_chip *chip = thermal->devdata; > + int thresh_temp; > + > + if (trip < 0 || !temp) > + return -EINVAL; > + > + thresh_temp = chip->thresh * TEMP_THRESH_STEP + > TEMP_THRESH_MIN; > + > + switch (trip) { > + case TRIP_STAGE3: > + thresh_temp += 2 * TEMP_STAGE_STEP; > + break; > + case TRIP_STAGE2: > + thresh_temp += TEMP_STAGE_STEP; > + break; > + case TRIP_STAGE1: > + break; > + default: > + return -EINVAL; > + } > + > + *temp = thresh_temp; > + > + return 0; > +} > + > +static int qpnp_tz_get_crit_temp(struct thermal_zone_device > *thermal, > + unsigned long *temp) > +{ > + struct qpnp_tm_chip *chip = thermal->devdata; > + > + if (!temp) > + return -EINVAL; > + > + *temp = chip->thresh * TEMP_THRESH_STEP + TEMP_THRESH_MIN + > + 2 * TEMP_STAGE_STEP; > + > + return 0; > +} > + > +static irqreturn_t qpnp_tm_isr(int irq, void *data) > +{ > + struct qpnp_tm_chip *chip = data; > + > + schedule_delayed_work(&chip->work, > msecs_to_jiffies(READ_DELAY_MS) + 1); > + > + return IRQ_HANDLED; > +} > + > +static void qpnp_tm_work(struct work_struct *work) > +{ > + struct delayed_work *dwork; > + struct qpnp_tm_chip *chip; > + int ret, mili_celsius; > + u8 reg; > + > + dwork = container_of(work, struct delayed_work, work); > + chip = container_of(dwork, struct qpnp_tm_chip, work); > + > + if (IS_ERR(chip->adc)) { > + ret = qpnp_tm_update_temp_no_adc(chip); > + if (ret < 0) > + return; > + } else { > + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); > + if (ret < 0) > + return; > + > + chip->stage = reg & STATUS_STAGE_MASK; > + > + ret = iio_read_channel_processed(chip->adc, &mili_celsius); > + if (ret < 0) > + return; > + > + chip->temp = mili_celsius; > + } > + > + if (chip->stage != chip->prev_stage) { > + chip->prev_stage = chip->stage; > + > + dev_warn(chip->dev, "Thermal alarm stage %u, threshold %u, > temp %ld mC\n", > + chip->stage, chip->thresh, chip->temp); > + > + thermal_zone_device_update(chip->tz_dev); > + > + /* Notify user space */ > + sysfs_notify(&chip->tz_dev->device.kobj, NULL, "type"); > + } > +} > + > +/* > + * This function initializes the internal temp value based on only > the > + * current thermal stage and threshold. Setup threshold control and > + * disable shutdown override. > + */ > +static int qpnp_tm_init(struct qpnp_tm_chip *chip) > +{ > + int ret; > + u8 reg; > + > + chip->thresh = THRESH_MIN; > + chip->temp = DEFAULT_TEMP; > + > + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); > + if (ret < 0) > + return ret; > + > + chip->stage = reg & STATUS_STAGE_MASK; > + > + if (chip->stage) > + chip->temp = chip->thresh * TEMP_THRESH_STEP + > + (chip->stage - 1) * TEMP_STAGE_STEP + > + TEMP_THRESH_MIN; > + > + /* > + * Set threshold and disable software override of stage 2 and > 3 > + * shutdowns. > + */ > + reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK; > + ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); > + if (ret < 0) > + return ret; > + > + /* Enable the thermal alarm PMIC module in always-on mode. */ > + reg = ALARM_CTRL_FORCE_ENABLE; > + ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg); > + > + return ret; > +} > + > +static struct thermal_zone_device_ops qpnp_tz_ops = { > + .get_temp= qpnp_tz_get_temp, > + .get_mode= qpnp_tz_get_mode, > + .set_mode= qpnp_tz_set_mode, > + .get_trip_type= qpnp_tz_get_trip_type, > + .get_trip_temp= qpnp_tz_get_trip_temp, > + .get_crit_temp= qpnp_tz_get_crit_temp, > +}; > + > +static int qpnp_tm_probe(struct platform_device *pdev) > +{ > + struct qpnp_tm_chip *chip; > + struct device_node *node; > + u8 type, subtype; > + int ret, irq, res[2]; > + > + node = pdev->dev.of_node; > + > + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); > + if (!chip) > + return -ENOMEM; > + > + dev_set_drvdata(&pdev->dev, chip); > + > + chip->dev = &pdev->dev; > + INIT_DELAYED_WORK(&chip->work, qpnp_tm_work); > + > + chip->map = dev_get_regmap(chip->dev->parent, NULL); > + if (!chip->map) > + return -ENXIO; > + > + ret = of_property_read_u32_array(node, "reg", res, 2); > + if (ret < 0) > + return ret; > + > + chip->base = res[0]; > + > + ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type); > + if (ret < 0) { > + dev_err(&pdev->dev, "could not read type\n"); > + return ret; > + } > + > + ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype); > + if (ret < 0) { > + dev_err(&pdev->dev, "could not read subtype\n"); > + return ret; > + } > + > + if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) { > + dev_err(&pdev->dev, "invalid type 0x%02x or subtype > 0x%02x\n", > + type, subtype); > + return -ENODEV; > + } > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) > + return irq; > + > + chip->adc = iio_channel_get(chip->dev, "thermal"); > + if (PTR_ERR(chip->adc) == -EPROBE_DEFER) > + return PTR_ERR(chip->adc); > + > + ret = qpnp_tm_init(chip); > + if (ret < 0) { > + dev_err(&pdev->dev, "init failed\n"); > + return ret; > + } > + > + /* Start in HW control. Switch to SW control when user > changes mode. */ > + chip->mode = THERMAL_DEVICE_DISABLED; > + > + chip->tz_dev = thermal_zone_device_register(node->name, > TRIP_NUM, 0, > + chip, &qpnp_tz_ops, NULL, > + 0, 0); > + if (IS_ERR(chip->tz_dev)) { > + dev_err(&pdev->dev, "TZ registration failed\n"); > + return PTR_ERR(chip->tz_dev); > + } > + > + ret = devm_request_irq(chip->dev, irq, qpnp_tm_isr, 0, > node->name, > + chip); > + if (ret < 0) > + thermal_zone_device_unregister(chip->tz_dev); > + > + return ret; > +} > + > +static int qpnp_tm_remove(struct platform_device *pdev) > +{ > + struct qpnp_tm_chip *chip = dev_get_drvdata(&pdev->dev); > + > + cancel_delayed_work_sync(&chip->work); > + thermal_zone_device_unregister(chip->tz_dev); > + qpnp_tm_shutdown_override(chip, false); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int qpnp_tm_suspend(struct device *dev) > +{ > + struct qpnp_tm_chip *chip = dev_get_drvdata(dev); > + > + /* Clear override bits in suspend to allow hardware control > */ > + qpnp_tm_shutdown_override(chip, false); > + > + return 0; > +} > + > +static int qpnp_tm_resume(struct device *dev) > +{ > + struct qpnp_tm_chip *chip = dev_get_drvdata(dev); > + > + /* Override hardware actions so software can control */ > + if (chip->mode == THERMAL_DEVICE_ENABLED) > + qpnp_tm_shutdown_override(chip, true); > + > + return 0; > +} > + > +static const struct dev_pm_ops qpnp_tm_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(qpnp_tm_suspend, qpnp_tm_resume) > +}; > + > +#define QPNP_TM_PM_OPS (&qpnp_tm_pm_ops) > +#else > +#define QPNP_TM_PM_OPS NULL > +#endif > + > +static const struct of_device_id qpnp_tm_match_table[] = { > + { .compatible = "qcom,spmi-temp-alarm" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, qpnp_tm_match_table); > + > +static struct platform_driver qpnp_tm_driver = { > + .driver = { > + .name = "spmi-temp-alarm", > + .of_match_table = qpnp_tm_match_table, > + .pm = QPNP_TM_PM_OPS, > + }, > + .probe = qpnp_tm_probe, > + .remove = qpnp_tm_remove, > +}; > +module_platform_driver(qpnp_tm_driver); > + > +MODULE_ALIAS("platform:spmi-temp-alarm"); > +MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver"); > +MODULE_LICENSE("GPL v2"); > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/