Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751601AbaJQJNa (ORCPT ); Fri, 17 Oct 2014 05:13:30 -0400 Received: from mail-bl2on0114.outbound.protection.outlook.com ([65.55.169.114]:56493 "EHLO na01-bl2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751231AbaJQJN1 convert rfc822-to-8bit (ORCPT ); Fri, 17 Oct 2014 05:13:27 -0400 X-Greylist: delayed 818 seconds by postgrey-1.27 at vger.kernel.org; Fri, 17 Oct 2014 05:13:26 EDT X-WSS-ID: 0NDKZMH-08-TLJ-02 X-M-MSG: From: Huang Rui To: Felipe Balbi , Alan Stern , Bjorn Helgaas , Greg Kroah-Hartman CC: Paul Zimmerman , Heikki Krogerus , Vincent Wan , Tony Li , , , , Huang Rui Subject: [PATCH v2 00/16] usb: dwc3: add support for AMD NL SoC Date: Fri, 17 Oct 2014 16:53:25 +0800 Message-ID: <1413536021-4886-1-git-send-email-ray.huang@amd.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain; charset="yes" Content-Transfer-Encoding: 8BIT X-EOPAttributedMessage: 0 X-Forefront-Antispam-Report: CIP:165.204.84.222;CTRY:US;IPV:NLI;EFV:NLI;SFV:NSPM;SFS:(10019020)(6009001)(428002)(189002)(199003)(164054003)(97736003)(50226001)(102836001)(53416004)(92726001)(86362001)(44976005)(62966002)(31966008)(20776003)(68736004)(101416001)(19580405001)(19580395003)(47776003)(92566001)(105586002)(77096002)(93916002)(84676001)(64706001)(36756003)(229853001)(87286001)(87936001)(88136002)(85306004)(85852003)(4396001)(120916001)(104166001)(77156001)(89996001)(80022003)(46102003)(95666004)(76482002)(107046002)(50466002)(99396003)(21056001)(50986999)(33646002)(106466001)(2171001);DIR:OUT;SFP:1102;SCL:1;SRVR:BY2PR02MB201;H:atltwp02.amd.com;FPR:;MLV:sfv;PTR:InfoDomainNonexistent;MX:1;A:1;LANG:en; X-Microsoft-Antispam: UriScan:; X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;SRVR:BY2PR02MB201; X-Exchange-Antispam-Report-Test: UriScan:; X-Forefront-PRVS: 0367A50BB1 Authentication-Results: spf=none (sender IP is 165.204.84.222) smtp.mailfrom=Ray.Huang@amd.com; X-OriginatorOrg: amd4.onmicrosoft.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, The series of patches add AMD NL SoC support for DesignWare USB3 OTG IP with PCI bus glue layer. This controller supported hibernation, LPM erratum and used the 2.80a IP version and amd own phy. Current implementation support both simulation and SoC platform. And already tested with gadget zero and msc tool. It works well on file storage gadget. These patches are generated on balbi/testing/next Changes from v1 -> v2 - remove dual role function temporarily - add pci quirk to avoid to bind with xhci driver - distinguish between simulation board and soc - break down all the special quirks Patch 1: - add PCI device id into pci bus glue Patch 2: - add PCI quirk to avoid to bind with xhci Patch 3: - enable hibernation Patch 4: - distinguish between simulation board and soc Patch 5: - add quirks flag to be compatible for kinds of soc Patch 6 - 16: - as felipe's suggestion, break down all the special quirks of amd nl Patch set already passed all the MSC testing, detailed result is below: root@hr-ub:/home/ray/felipe/usb-tools# ./msc.sh -o /dev/sdb1 Starting test suite: 2014年 10月 09日 星期四 18:02:41 CST test 0a: simple 4k read/write test 0: sent 3.91 MB read 0.03 MB/s write 0.03 MB/s ... success test 0b: simple 8k read/write test 0: sent 7.81 MB read 6.15 MB/s write 5.96 MB/s ... success test 0c: simple 16k read/write test 0: sent 15.62 MB read 14.30 MB/s write 12.97 MB/s ... success test 0d: simple 32k read/write test 0: sent 31.25 MB read 18.26 MB/s write 17.10 MB/s ... success test 0e: simple 64k read/write test 0: sent 62.50 MB read 22.00 MB/s write 16.33 MB/s ... success test 1: simple 1-sector read/write test 1: sent 500.00 kB read 1.05 MB/s write 0.93 MB/s ... success test 2: simple 8-sectors read/write test 2: sent 3.91 MB read 6.52 MB/s write 6.10 MB/s ... success test 3: simple 32-sectors read/write test 3: sent 15.62 MB read 14.33 MB/s write 13.14 MB/s ... success test 4: simple 64-sectors read/write test 4: sent 31.25 MB read 17.79 MB/s write 16.38 MB/s ... success test 5a: scatter/gather for 2-sectors buflen 4k test 5: sent 1000.00 kB read 1.85 MB/s write 1.56 MB/s ... success test 5b: scatter/gather for 2-sectors buflen 8k test 5: sent 1000.00 kB read 1.91 MB/s write 1.63 MB/s ... success test 5c: scatter/gather for 2-sectors buflen 16k test 5: sent 1000.00 kB read 1.94 MB/s write 1.62 MB/s ... success test 5d: scatter/gather for 2-sectors buflen 32k test 5: sent 1000.00 kB read 1.93 MB/s write 1.64 MB/s ... success test 5e: scatter/gather for 2-sectors buflen 64k test 5: sent 1000.00 kB read 1.96 MB/s write 1.68 MB/s ... success test 6a: scatter/gather for 8-sectors buflen 4k test 6: sent 3.91 MB read 6.53 MB/s write 6.05 MB/s ... success test 6b: scatter/gather for 8-sectors buflen 8k test 6: sent 3.91 MB read 6.56 MB/s write 5.98 MB/s ... success test 6c: scatter/gather for 8-sectors buflen 16k test 6: sent 3.91 MB read 6.55 MB/s write 6.15 MB/s ... success test 6d: scatter/gather for 8-sectors buflen 32k test 6: sent 3.91 MB read 6.51 MB/s write 6.06 MB/s ... success test 6e: scatter/gather for 8-sectors buflen 64k test 6: sent 3.91 MB read 6.50 MB/s write 6.06 MB/s ... success test 7a: scatter/gather for 32-sectors buflen 16k test 7: sent 15.62 MB read 14.23 MB/s write 12.99 MB/s ... success test 7b: scatter/gather for 32-sectors buflen 32k test 7: sent 15.62 MB read 14.27 MB/s write 12.91 MB/s ... success test 7c: scatter/gather for 32-sectors buflen 64k test 7: sent 15.62 MB read 14.73 MB/s write 13.00 MB/s ... success test 8a: scatter/gather for 64-sectors buflen 32k test 8: sent 31.25 MB read 18.42 MB/s write 16.65 MB/s ... success test 8b: scatter/gather for 64-sectors buflen 64k test 8: sent 31.25 MB read 17.70 MB/s write 16.39 MB/s ... success test 9: scatter/gather for 128-sectors buflen 64k test 9: sent 62.50 MB read 21.14 MB/s write 16.07 MB/s ... success test 10: read over the end of the block device test 10: sent 62.01 MB read 0.00 MB/s write 0.00 MB/s ... success test 11: lseek past the end of the block device test 11: sent 0.00 B read 0.00 MB/s write 0.00 MB/s ... success test 12: write over the end of the block device test 12: sent 0.00 B read 0.00 MB/s write 0.00 MB/s ... success test 13: write 1 sg, read 8 random size sgs test 13: sent 62.50 MB read 21.61 MB/s write 16.21 MB/s ... success test 14: write 8 random size sgs, read 1 sg test 14: sent 62.50 MB read 22.52 MB/s write 18.61 MB/s ... success test 15: write and read 8 random size sgs test 15: sent 62.50 MB read 22.31 MB/s write 19.28 MB/s ... success test 16a: read with heap allocated buffer test 16: sent 62.50 MB read 21.69 MB/s write 0.00 MB/s ... success test 16b: read with stack allocated buffer test 16: sent 62.50 MB read 21.42 MB/s write 0.00 MB/s ... success test 17a: write with heap allocated buffer test 17: sent 0.00 B read 0.00 MB/s write 19.94 MB/s ... success test 17b: write with stack allocated buffer test 17: sent 0.00 B read 0.00 MB/s write 20.09 MB/s ... success test 18a: write 0x00 and read it back test 18: sent 62.50 MB read 21.94 MB/s write 16.96 MB/s ... success test 18b: write 0xff and read it back test 18: sent 62.50 MB read 19.89 MB/s write 15.51 MB/s ... success test 18c: write 0x55 and read it back test 18: sent 62.50 MB read 22.00 MB/s write 16.62 MB/s ... success test 18d: write 0xaa and read it back test 18: sent 62.50 MB read 21.81 MB/s write 16.53 MB/s ... success test 18e: write 0x11 and read it back test 18: sent 62.50 MB read 22.33 MB/s write 17.00 MB/s ... success test 18f: write 0x22 and read it back test 18: sent 62.50 MB read 21.66 MB/s write 16.44 MB/s ... success test 18g: write 0x44 and read it back test 18: sent 62.50 MB read 22.23 MB/s write 17.08 MB/s ... success test 18h: write 0x88 and read it back test 18: sent 62.50 MB read 21.54 MB/s write 16.17 MB/s ... success test 18i: write 0x33 and read it back test 18: sent 62.50 MB read 21.20 MB/s write 16.58 MB/s ... success test 18j: write 0x66 and read it back test 18: sent 62.50 MB read 21.82 MB/s write 16.13 MB/s ... success test 18k: write 0x99 and read it back test 18: sent 62.50 MB read 21.92 MB/s write 16.36 MB/s ... success test 18l: write 0xcc and read it back test 18: sent 62.50 MB read 22.37 MB/s write 16.74 MB/s ... success test 18m: write 0x77 and read it back test 18: sent 62.50 MB read 22.34 MB/s write 16.24 MB/s ... success test 18n: write 0xbb and read it back test 18: sent 62.50 MB read 21.82 MB/s write 16.23 MB/s ... success test 18o: write 0xdd and read it back test 18: sent 62.50 MB read 21.38 MB/s write 16.48 MB/s ... success test 18p: write 0xee and read it back test 18: sent 62.50 MB read 22.33 MB/s write 16.15 MB/s ... success Test suite ended: 2014年 10月 09日 星期四 18:13:36 CST Thanks, Rui Huang Rui (16): usb: dwc3: add AMD NL support pci: quirks: add quirk to avoid AMD NL to bind with xhci usb: dwc3: enable hibernation if to be supported usb: dwc3: add a flag to check if it is fpga board usb: dwc3: add quirks support to be compatible for kinds of SoCs usb: dwc3: add disscramble quirk usb: dwc3: add lpm erratum support usb: dwc3: add u2exit lfps quirk usb: dwc3: add P3 in U2 SS inactive quirk usb: dwc3: add request p1p2p3 quirk usb: dwc3: add delay p1p2p3 quirk usb: dwc3: add delay phy power change quirk usb: dwc3: add lfps filter quirk usb: dwc3: enable rx_detect to polling lfps quirk usb: dwc3: add tx demphasis quirk usb: dwc3: enable usb suspend phy drivers/pci/quirks.c | 20 ++++++++++++ drivers/usb/dwc3/core.c | 66 +++++++++++++++++++++++++++++++++++++++- drivers/usb/dwc3/core.h | 42 +++++++++++++++++++------ drivers/usb/dwc3/dwc3-pci.c | 26 ++++++++++++++++ drivers/usb/dwc3/gadget.c | 7 +++++ drivers/usb/dwc3/platform_data.h | 16 ++++++++++ 6 files changed, 167 insertions(+), 10 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/