Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756966AbaJXOqs (ORCPT ); Fri, 24 Oct 2014 10:46:48 -0400 Received: from mail.kapsi.fi ([217.30.184.167]:53830 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756444AbaJXOkz (ORCPT ); Fri, 24 Oct 2014 10:40:55 -0400 From: Mikko Perttunen To: swarren@wwwdotorg.org, thierry.reding@gmail.com, gnurou@gmail.com, pdeschrijver@nvidia.com, rjw@rjwysocki.net, viresh.kumar@linaro.org Cc: mturquette@linaro.org, pwalmsley@nvidia.com, vinceh@nvidia.com, pgaikwad@nvidia.com, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org, linux-arm-kernel@lists.infradead.org, tuomas.tynkkynen@iki.fi, Tuomas Tynkkynen , Mikko Perttunen Subject: [PATCH v5 04/16] clk: tegra: Add functions for parsing CVB tables Date: Fri, 24 Oct 2014 17:39:11 +0300 Message-Id: <1414161563-16812-5-git-send-email-mikko.perttunen@kapsi.fi> X-Mailer: git-send-email 2.1.0 In-Reply-To: <1414161563-16812-1-git-send-email-mikko.perttunen@kapsi.fi> References: <1414161563-16812-1-git-send-email-mikko.perttunen@kapsi.fi> X-SA-Exim-Connect-IP: 2001:708:30:12d0:beee:7bff:fe5b:f272 X-SA-Exim-Mail-From: mikko.perttunen@kapsi.fi X-SA-Exim-Scanned: No (on mail.kapsi.fi); SAEximRunCond expanded to false Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Tuomas Tynkkynen Tegra CVB tables encode the relationship between operating voltage and optimal frequency as a function of the so-called speedo value. The speedo value is written to the on-chip fuses at the factory, which allows the voltage-frequency operating points to be calculated on an per-chip basis. Add utility functions to parse the Tegra-specific tables and export the voltage-frequency pairs to the generic OPP framework for other drivers to use. Signed-off-by: Tuomas Tynkkynen Signed-off-by: Mikko Perttunen --- arch/arm/mach-tegra/Kconfig | 1 + drivers/clk/tegra/cvb.c | 133 ++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/tegra/cvb.h | 67 ++++++++++++++++++++++ 3 files changed, 201 insertions(+) create mode 100644 drivers/clk/tegra/cvb.c create mode 100644 drivers/clk/tegra/cvb.h diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 0953996..0d5832f 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -7,6 +7,7 @@ menuconfig ARCH_TEGRA select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL + select PM_OPP select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS diff --git a/drivers/clk/tegra/cvb.c b/drivers/clk/tegra/cvb.c new file mode 100644 index 0000000..69c74ee --- /dev/null +++ b/drivers/clk/tegra/cvb.c @@ -0,0 +1,133 @@ +/* + * Utility functions for parsing Tegra CVB voltage tables + * + * Copyright (C) 2012-2014 NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ +#include +#include +#include + +#include "cvb.h" + +/* cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0) */ +static inline int get_cvb_voltage(int speedo, int s_scale, + const struct cvb_coefficients *cvb) +{ + int mv; + + /* apply only speedo scale: output mv = cvb_mv * v_scale */ + mv = DIV_ROUND_CLOSEST(cvb->c2 * speedo, s_scale); + mv = DIV_ROUND_CLOSEST((mv + cvb->c1) * speedo, s_scale) + cvb->c0; + return mv; +} + +static int round_cvb_voltage(int mv, int v_scale, + const struct rail_alignment *align) +{ + /* combined: apply voltage scale and round to cvb alignment step */ + int uv; + int step = (align->step_uv ? : 1000) * v_scale; + int offset = align->offset_uv * v_scale; + + uv = max(mv * 1000, offset) - offset; + uv = DIV_ROUND_UP(uv, step) * align->step_uv + align->offset_uv; + return uv / 1000; +} + +enum { + DOWN, + UP +}; + +static int round_voltage(int mv, const struct rail_alignment *align, int up) +{ + if (align->step_uv) { + int uv; + + uv = max(mv * 1000, align->offset_uv) - align->offset_uv; + uv = (uv + (up ? align->step_uv - 1 : 0)) / align->step_uv; + return (uv * align->step_uv + align->offset_uv) / 1000; + } + return mv; +} + +static int build_opp_table(const struct cvb_table *d, + int speedo_value, + unsigned long max_freq, + struct device *opp_dev) +{ + int i, ret, dfll_mv, min_mv, max_mv; + const struct cvb_table_freq_entry *table = NULL; + const struct rail_alignment *align = &d->alignment; + + min_mv = round_voltage(d->min_millivolts, align, UP); + max_mv = round_voltage(d->max_millivolts, align, DOWN); + + for (i = 0; i < MAX_DVFS_FREQS; i++) { + table = &d->cvb_table[i]; + if (!table->freq || (table->freq > max_freq)) + break; + + dfll_mv = get_cvb_voltage( + speedo_value, d->speedo_scale, &table->coefficients); + dfll_mv = round_cvb_voltage(dfll_mv, d->voltage_scale, align); + dfll_mv = clamp(dfll_mv, min_mv, max_mv); + + ret = dev_pm_opp_add(opp_dev, table->freq, dfll_mv * 1000); + if (ret) + return ret; + } + + return 0; +} + +/** + * tegra_cvb_build_opp_table - build OPP table from Tegra CVB tables + * @cvb_tables: array of CVB tables + * @sz: size of the previously mentioned array + * @process_id: process id of the HW module + * @speedo_id: speedo id of the HW module + * @speedo_value: speedo value of the HW module + * @max_rate: highest safe clock rate + * @opp_dev: the struct device * for which the OPP table is built + * + * On Tegra, a CVB table encodes the relationship between operating voltage + * and safe maximal frequency for a given module (e.g. GPU or CPU). This + * function calculates the optimal voltage-frequency operating points + * for the given arguments and exports them via the OPP library for the + * given @opp_dev. Returns a pointer to the struct cvb_table that matched + * or an ERR_PTR on failure. + */ +const struct cvb_table *tegra_cvb_build_opp_table( + const struct cvb_table *cvb_tables, + size_t sz, int process_id, + int speedo_id, int speedo_value, + unsigned long max_rate, + struct device *opp_dev) +{ + int i, ret; + + for (i = 0; i < sz; i++) { + const struct cvb_table *d = &cvb_tables[i]; + + if (d->speedo_id != -1 && d->speedo_id != speedo_id) + continue; + if (d->process_id != -1 && d->process_id != process_id) + continue; + + ret = build_opp_table(d, speedo_value, max_rate, opp_dev); + return ret ? ERR_PTR(ret) : d; + } + + return ERR_PTR(-EINVAL); +} diff --git a/drivers/clk/tegra/cvb.h b/drivers/clk/tegra/cvb.h new file mode 100644 index 0000000..f62cdc4 --- /dev/null +++ b/drivers/clk/tegra/cvb.h @@ -0,0 +1,67 @@ +/* + * Utility functions for parsing Tegra CVB voltage tables + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#ifndef __DRIVERS_CLK_TEGRA_CVB_H +#define __DRIVERS_CLK_TEGRA_CVB_H + +#include + +struct device; + +#define MAX_DVFS_FREQS 40 + +struct rail_alignment { + int offset_uv; + int step_uv; +}; + +struct cvb_coefficients { + int c0; + int c1; + int c2; +}; + +struct cvb_table_freq_entry { + unsigned long freq; + struct cvb_coefficients coefficients; +}; + +struct cvb_cpu_dfll_data { + u32 tune0_low; + u32 tune0_high; + u32 tune1; +}; + +struct cvb_table { + int speedo_id; + int process_id; + + int min_millivolts; + int max_millivolts; + struct rail_alignment alignment; + + int speedo_scale; + int voltage_scale; + struct cvb_table_freq_entry cvb_table[MAX_DVFS_FREQS]; + struct cvb_cpu_dfll_data cpu_dfll_data; +}; + +const struct cvb_table *tegra_cvb_build_opp_table( + const struct cvb_table *cvb_tables, + size_t sz, int process_id, + int speedo_id, int speedo_value, + unsigned long max_rate, + struct device *opp_dev); + +#endif -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/