Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751400AbaJZKUK (ORCPT ); Sun, 26 Oct 2014 06:20:10 -0400 Received: from mout.gmx.net ([212.227.17.22]:65522 "EHLO mout.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751253AbaJZKUH (ORCPT ); Sun, 26 Oct 2014 06:20:07 -0400 Message-ID: <544CCACD.90300@gmx.de> Date: Sun, 26 Oct 2014 11:19:57 +0100 From: Hartmut Knaack User-Agent: Mozilla/5.0 (X11; Linux i686; rv:32.0) Gecko/20100101 Firefox/32.0 SeaMonkey/2.29 MIME-Version: 1.0 To: Karol Wrona , Jonathan Cameron , linux-iio@vger.kernel.org, Arnd Bergmann , linux-kernel@vger.kernel.org CC: Bartlomiej Zolnierkiewicz , Kyungmin Park , Antonio Borneo Subject: Re: [PATCH v3 1/1] misc: st32fwu: Add stm32 upgrade protocol handling References: <1413297465-11039-1-git-send-email-k.wrona@samsung.com> <1413297465-11039-2-git-send-email-k.wrona@samsung.com> In-Reply-To: <1413297465-11039-2-git-send-email-k.wrona@samsung.com> Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit X-Provags-ID: V03:K0:flvSPEEC4o9MKhSyRAoygdwX7uukcjZB4TgqEo1jS5NqKFRzSpc NI4RvuD98r008CZ27KXnjqVWCngED/Jrkr6KNAk7x7LT0q6m+fQyUXqqd1BU2VE/bF+26aA GslnKpP8JJrdPJzQ+1kaxoaRyjdqjqCj44kAUBatI3n7Dbe4gE3GBkLhH5b9ts0bNWVgyWt vHt9EidtCOsXFjkbjllJw== X-UI-Out-Filterresults: notjunk:1; Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Karol Wrona schrieb am 14.10.2014 16:37: > Adds stm32 bootloader protocol handling. > > SPI transfers are done using DMA safe buffer which is allocated once per > spi upgrade life cycle. Now it supports only SPI bus but it looks that UART > or I2C are quite similar and it can be used as start platform for implementing > their handling. > > It was tested on STM32F401 MCU. > Hi, looks pretty good over all. Just a few typos and some multiline comments should be improved. And you could consider to use unsigned for some variables, which will just be used for absolute values (like len, count, retries). See my comments inline. > Change-Id: I5e5b441310c897ff822e65041531d80ea0e7426c > Signed-off-by: Karol Wrona > Acked-by: Kyungmin Park > --- > drivers/misc/Kconfig | 1 + > drivers/misc/Makefile | 1 + > drivers/misc/stm32fwu/Kconfig | 6 + > drivers/misc/stm32fwu/Makefile | 3 + > drivers/misc/stm32fwu/stm32_core.c | 399 ++++++++++++++++++++++++++++++++++++ > drivers/misc/stm32fwu/stm32_core.h | 81 ++++++++ > drivers/misc/stm32fwu/stm32_spi.c | 108 ++++++++++ > include/linux/stm32fwu.h | 47 +++++ > 8 files changed, 646 insertions(+) > create mode 100644 drivers/misc/stm32fwu/Kconfig > create mode 100644 drivers/misc/stm32fwu/Makefile > create mode 100644 drivers/misc/stm32fwu/stm32_core.c > create mode 100644 drivers/misc/stm32fwu/stm32_core.h > create mode 100644 drivers/misc/stm32fwu/stm32_spi.c > create mode 100644 include/linux/stm32fwu.h > > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig > index bbeb451..b2e68c1 100644 > --- a/drivers/misc/Kconfig > +++ b/drivers/misc/Kconfig > @@ -528,4 +528,5 @@ source "drivers/misc/mic/Kconfig" > source "drivers/misc/genwqe/Kconfig" > source "drivers/misc/echo/Kconfig" > source "drivers/misc/cxl/Kconfig" > +source "drivers/misc/stm32fwu/Kconfig" > endmenu > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile > index 7d5c4cd..88c8999 100644 > --- a/drivers/misc/Makefile > +++ b/drivers/misc/Makefile > @@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE) += genwqe/ > obj-$(CONFIG_ECHO) += echo/ > obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o > obj-$(CONFIG_CXL_BASE) += cxl/ > +obj-$(CONFIG_STM32_UPGRADE_PROTOCOL) += stm32fwu/ > diff --git a/drivers/misc/stm32fwu/Kconfig b/drivers/misc/stm32fwu/Kconfig > new file mode 100644 > index 0000000..1484441 > --- /dev/null > +++ b/drivers/misc/stm32fwu/Kconfig > @@ -0,0 +1,6 @@ > +config STM32_UPGRADE_PROTOCOL > + tristate "STM32 upgrade protocol support" > + depends on SPI > + help > + STM32 microcontroller bootloader upgrade protocol. > + Say Y if you want to use it. > diff --git a/drivers/misc/stm32fwu/Makefile b/drivers/misc/stm32fwu/Makefile > new file mode 100644 > index 0000000..9d5935b > --- /dev/null > +++ b/drivers/misc/stm32fwu/Makefile > @@ -0,0 +1,3 @@ > +#EXTRA_CFLAGS+= -O0 > + > +obj-$(CONFIG_STM32_UPGRADE_PROTOCOL) += stm32_core.o stm32_spi.o > diff --git a/drivers/misc/stm32fwu/stm32_core.c b/drivers/misc/stm32fwu/stm32_core.c > new file mode 100644 > index 0000000..a58018a > --- /dev/null > +++ b/drivers/misc/stm32fwu/stm32_core.c > @@ -0,0 +1,399 @@ > +/* > + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include "stm32_core.h" > + > +static inline int stm32fwu_wait_for_ack(struct stm32fwu_fw *fw, int retries) retries could be unsigned. > +{ > + return fw->wait_for_ack(fw, retries); > +} > + > +static inline int stm32fwu_send_cmd(struct stm32fwu_fw *fw, u8 cmd, > + int timeout) timeout could be unsigned. > +{ > + struct stm32fwu_cmd cm = { > + .cmd = cmd, > + .neg_cmd = ~cmd, > + .timeout = timeout, > + }; > + > + return fw->send_cmd(fw, &cm); > +} > + > +static inline int stm32fwu_write(struct stm32fwu_fw *fw, const u8 *buf, > + int len) len could be unsigned. > +{ > + return fw->write(fw, buf, len); > +} > + > +static inline int stm32fwu_read(struct stm32fwu_fw *fw, u8 *buf, int len) len could be unsigned. > +{ > + return fw->read(fw, buf, len); > +} > + > +static int send_addr(struct stm32fwu_fw *fw, u32 addr) > +{ > + int ret; > + u8 *buffer = fw->buffer; > + > + buffer[0] = (addr >> 24) & 0xFF; > + buffer[1] = (addr >> 16) & 0xFF; > + buffer[2] = (addr >> 8) & 0xFF; > + buffer[3] = addr & 0xFF; > + buffer[4] = buffer[0] ^ buffer[1] ^ buffer[2] ^ buffer[3]; > + > + ret = stm32fwu_write(fw, buffer, STM32FWU_ADDR_LEN); > + if (ret < 0) > + return ret; > + > + return stm32fwu_wait_for_ack(fw, STM32FWU_COMMON_COUNT); > +} > + > +static int fwu_write(struct stm32fwu_fw *fw, u32 addr, const u8 *buffer, > + int len) len could be unsigned. > +{ > + int ret, i, aligned_len; i and aligned_len could be unsigned. > + u8 *sbuf = fw->buffer; > + u8 xor = 0; > + > + if (len > STM32FWU_MAX_TRANSFER_SIZE) { > + dev_err(fw->dev, "More than 256 bytes per transfer\n"); > + return -EINVAL; > + } > + > + ret = stm32fwu_send_cmd(fw, STM32FWU_WRITE_MEM_CMD, > + STM32FWU_CMD_COUNT); > + if (ret < 0) > + return ret; > + > + ret = send_addr(fw, addr); > + if (ret < 0) > + return ret; > + > + /* the same buffer is used for commands and data so the order really > + * matters here */ Style of multiline comments here and in many comments below should be according to common coding style. > + memcpy(&sbuf[1], buffer, len); > + > + /* Just in case - check if chunk is a multiple of 4 > + * generally the most of writes will be 256 bytes long. > + * I wonder if bootcode should worry about alignment. > + * According AN4286 it should be a multiple of 2 but other notes > + * say that it should be 4 */ > + aligned_len = ALIGN(len, sizeof(u32)); > + if (aligned_len - len) > + for (i = aligned_len; i > len; --i) > + sbuf[i] = 0xFF; > + > + /* according AN4286 here is sent 0 < N < 255, it looks like max index, > + * not size */ > + sbuf[0] = aligned_len - 1; > + > + /* compute checksum */ > + for (i = 0; i < aligned_len + 1; ++i) > + xor ^= sbuf[i]; > + sbuf[aligned_len + 1] = xor; > + > + /* NOTE AN4286 > + * in some conditions the master has to wait 1 ms here */ > + usleep_range(1000, 1100); > + > + ret = stm32fwu_write(fw, sbuf, aligned_len + 2); > + if (ret < 0) > + return ret; > + > + return stm32fwu_wait_for_ack(fw, STM32FWU_COMMON_COUNT); > +} > + > +static int fwu_erase(struct stm32fwu_fw *fw) > +{ > + int ret; > + u8 *sbuf = fw->buffer; > + > + ret = stm32fwu_send_cmd(fw, STM32FWU_ERASE_CMD, STM32FWU_CMD_COUNT); > + if (ret < 0) > + return ret; > + > + /* global erase */ > + sbuf[0] = 0xFF; > + sbuf[1] = 0xFF; > + sbuf[2] = 0x00; > + > + ret = stm32fwu_write(fw, sbuf, STM32FWU_ERASE_CMD_LEN); > + if (ret < 0) > + return ret; > + > + return stm32fwu_wait_for_ack(fw, STM32FWU_ERASE_COUNT); > +} > + > +/** > + * stm32fwu_get() - gets bootloader information frame > + * @fw: fw object. > + * > + * Read bootloader information: > + * > + * Byte 1 bootloader version (0 < version < 255), example: 0x10 = version 1.0. > + * > + * Byte 2 0x00 (Get command) > + * > + * Byte 3 0x01 (Get Version) > + * > + * Byte 4 0x02 (Get ID) > + * > + * Byte 5 0x11 (Read Memory command) > + * > + * Byte 6 0x21 (Go command) > + * > + * Byte 7 0x31 (Write Memory command) > + * > + * Byte 8 0x44 (Erase command) > + * > + * Byte 9 0x63 (Write Protect command) > + * > + * Byte 10 0x73 (Write Unprotect command) > + * > + * Byte 11 0x82 (Readout Protect command) > + * > + * Byte 12 0x92 (Readout Unprotect command) > + * > + * Return: read byte count or error code. > + */ > +int stm32fwu_get(struct stm32fwu_fw *fw) > +{ > + int ret, count = 0; count doesn't need to be initialized and can be unsigned. > + > + ret = stm32fwu_send_cmd(fw, STM32FWU_GET_CMD, STM32FWU_CMD_COUNT); > + if (ret < 0) > + return ret; > + > + ret = stm32fwu_read(fw, &fw->buffer[STM32FWU_MAX_BUFFER_SIZE], 1); > + if (ret < 0) > + return ret; > + > + count = fw->buffer[STM32FWU_MAX_BUFFER_SIZE]; > + if (count >= STM32FWU_MAX_TRANSFER_SIZE) > + return -EINVAL; > + > + ret = stm32fwu_read(fw, &fw->buffer[STM32FWU_MAX_BUFFER_SIZE], count); > + if (ret < 0) > + return ret; > + > + ret = stm32fwu_wait_for_ack(fw, STM32FWU_COMMON_COUNT); > + if (ret < 0) > + return ret; > + > + return count; > +} > +EXPORT_SYMBOL(stm32fwu_get); > + > +/** > + * stm32fwu_get() - gets bootloader information frame typo: should be stm32fwu_get_version(). > + * @fw: fw object. > + * > + * Return: < 0 - error code, any positive value means success. > + */ > +int stm32fwu_get_version(struct stm32fwu_fw *fw) > +{ > + int ret; > + > + ret = stm32fwu_send_cmd(fw, STM32FWU_GET_CMD, STM32FWU_CMD_COUNT); > + if (ret < 0) > + return ret; > + > + ret = stm32fwu_read(fw, &fw->buffer[STM32FWU_MAX_BUFFER_SIZE], 1); > + if (ret < 0) > + return ret; > + > + ret = stm32fwu_wait_for_ack(fw, STM32FWU_COMMON_COUNT); > + if (ret < 0) > + return ret; > + > + return fw->buffer[STM32FWU_MAX_BUFFER_SIZE]; > +} > +EXPORT_SYMBOL(stm32fwu_get_version); > + > +/** > + * stm32fwu_send_sync() - sends bootloader synchronization frame > + * @fw: fw object. > + * > + * It is used during SPI upgrade. > + * > + * Return: if succeed the number of ack waiting cycles or error code. > + */ > +int stm32fwu_send_sync(struct stm32fwu_fw *fw) > +{ > + int ret; > + > + dev_info(fw->dev, "send sync byte for upgrade\n"); > + > + fw->buffer[0] = STM32FWU_SPI_SOF; > + > + ret = stm32fwu_write(fw, fw->buffer, 1); > + if (ret < 0) > + return ret; > + > + return stm32fwu_wait_for_ack(fw, STM32FWU_CMD_COUNT); > +} > +EXPORT_SYMBOL(stm32fwu_send_sync); > + > +/** > + * stm32fwu_update() - runs all firmware update work > + * @fw: fw object. > + * > + * Return: status code < 0 if error. > + */ > +int stm32fwu_update(struct stm32fwu_fw *fw) > +{ > + int ret = 0, remaining; > + u32 pos = 0; > + u32 fw_addr = STM32FWU_APP_ADDR; > + int block = STM32FWU_MAX_TRANSFER_SIZE; > + int count = 0, err_count = 0, retry_count = 0; remaining, block, count, err_count and retry_count could be unsigned and remaining could already be initialized here during definition. > + > + dev_info(fw->dev, "%s start\n", __func__); > + > + ret = fwu_erase(fw); > + if (ret < 0) { > + dev_err(fw->dev, "%s, fw_erase_stm failed %d\n", __func__, > + ret); > + return ret; > + } > + > + remaining = fw->fw_len; > + > + while (remaining > 0) { > + if (block > remaining) > + block = remaining; > + > + while (retry_count < 3) { > + ret = fwu_write(fw, fw_addr, fw->fw_data + pos, > + block); No need to wrap the last parameter, still sufficient space on the line. > + if (ret < 0) { > + dev_err(fw->dev, > + "Err %d writing to addr 0x%08X\n", > + ret, fw_addr); > + retry_count++; > + err_count++; > + continue; > + } > + retry_count = 0; > + break; > + } > + > + if (ret < 0) { > + dev_err(fw->dev, > + "Writing MEM failed: %d, retry cont: %d\n", Typo: retry count. > + ret, err_count); > + return ret; > + } > + > + remaining -= block; > + pos += block; > + fw_addr += block; > + if (count++ == 20) { > + dev_info(fw->dev, "Updated %u bytes / %u bytes\n", > + pos, fw->fw_len); > + count = 0; > + } > + } > + > + dev_info(fw->dev, > + "Firmware download success.(%d bytes, retry %d)\n", pos, > + err_count); > + > + ret = stm32fwu_send_cmd(fw, STM32FWU_GO_ADDR_CMD, STM32FWU_CMD_COUNT); > + if (ret < 0) > + return ret; > + > + return send_addr(fw, STM32FWU_APP_ADDR); > +} > +EXPORT_SYMBOL(stm32fwu_update); > + > +/** > + * stm32fwu_init() - creates firmware upgrade instance > + * @dev: Pointer to device. > + * @iface: Interface type. > + * @data: Pointer to firmware data. > + * @len: Length of firmware data in bytes. > + * > + * It allocates the place for fwu structure and transfer buffer so it should > + * be deinitialized by stm32fw_destroy(). Firmware upgrade is simple operation > + * and it was assumed that it will be called form one context so there is no Typo: from > + * locking for fwu functions. > + * > + * Return: Pointer to firmware upgrade structure. > + */ > +struct stm32fwu_fw *stm32fwu_init(struct device *dev, > + enum stm32fwu_iface iface, const u8 *data, > + int len) len could be unsigned. > +{ > + struct stm32fwu_fw *fw; > + > + if (iface >= STM32_MAX || iface < 0) { > + dev_err(dev, "wrong iface type\n"); > + return NULL; > + } > + > + fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL); > + if (fw == NULL) > + return NULL; > + > + /* 2 times for tx and rx buffer */ > + fw->buffer = devm_kzalloc(dev, 2 * STM32FWU_MAX_BUFFER_SIZE, > + GFP_KERNEL | GFP_DMA); > + if (fw->buffer == NULL) { > + devm_kfree(dev, fw); > + return NULL; > + } > + > + fw->dev = dev; > + fw->fw_len = len; > + fw->fw_data = data; > + > + switch (iface) { > + case STM32_SPI: > + stm32fwu_spi_init(fw); > + break; > + default: > + pr_err("wrong interface\n"); > + goto _err; > + } > + > + return fw; > +_err: > + devm_kfree(dev, fw->buffer); > + devm_kfree(dev, fw); > + return NULL; > +} > +EXPORT_SYMBOL(stm32fwu_init); > + > +/** > + * stm32fwu_destroy() - cleans up fwu structure and buffer. > + * @fw: Pointer to fwu structure. > + */ > +void stm32fwu_destroy(struct stm32fwu_fw *fw) > +{ > + devm_kfree(fw->dev, fw->buffer); > + devm_kfree(fw->dev, fw); > +} > +EXPORT_SYMBOL(stm32fwu_destroy); > + > +MODULE_AUTHOR("Karol Wrona "); > +MODULE_DESCRIPTION("STM32 upgrade protocol"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/misc/stm32fwu/stm32_core.h b/drivers/misc/stm32fwu/stm32_core.h > new file mode 100644 > index 0000000..717a89d > --- /dev/null > +++ b/drivers/misc/stm32fwu/stm32_core.h > @@ -0,0 +1,81 @@ > +/* > + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef _STM32_CORE_H_ > +#define _STM32_CORE_H_ > + > +#define STM32FWU_ADDR_LEN 5 > +#define STM32FWU_ERASE_CMD_LEN 3 > + > +/* Protocol */ > +#define STM32FWU_SPI_SOF 0x5A > +#define STM32FWU_ACK 0x79 > +#define STM32FWU_ACK2 0xF9 > +#define STM32FWU_NACK 0x1F > + > +#define STM32FWU_MAX_TRANSFER_SIZE 256 > +#define STM32FWU_MAX_BUFFER_SIZE 260 > + > +#define STM32FWU_APP_ADDR 0x08000000 > + > +/* Retries counts */ > +#define STM32FWU_ERASE_COUNT 18000 > +#define STM32FWU_CMD_COUNT 30 > +#define STM32FWU_COMMON_COUNT 20 > + > +/* Commands */ > +#define STM32FWU_WRITE_MEM_CMD 0x31 > +#define STM32FWU_GO_ADDR_CMD 0x21 > +#define STM32FWU_ERASE_CMD 0x44 > +#define STM32FWU_GET_CMD 0x00 > +#define STM32FWU_GET_VERSION_CMD 0x01 > + > +/** > + * struct stm32fwu_cmd - Upgrade command > + * @cmd: Fwu command. > + * @neg_cmd: Bit negation of Fwu command used xor'ed in STM. > + * @timeout: Number of retries. > + */ > +struct stm32fwu_cmd { > + u8 cmd; > + u8 neg_cmd; > + int timeout; timeout could be unsigned. > +}; > + > +/** > + * struct stm32fwu_fw - Generic representation for STM32 fw upgrade > + * @dev: Pointer to device. > + * @wait_for_ack: ACK callback. > + * @send_cmd: Command callback. > + * @write: Write callback. > + * @read: Read callback. > + * @fw_data: Pointer to firmware binary. > + * @fw_len: The length of fw bin. > + * @buffer: Pointer to SPI buffer: should be DMA safe > + */ > +struct stm32fwu_fw { > + int (*wait_for_ack)(struct stm32fwu_fw *fw, int retries); > + int (*send_cmd)(struct stm32fwu_fw *fw, struct stm32fwu_cmd *cmd); > + int (*write)(struct stm32fwu_fw *fw, const u8 *buf, int len); > + int (*read)(struct stm32fwu_fw *fw, u8 *buf, int len); > + const u8 *fw_data; > + int fw_len; fw_len could be unsigned. > + u8 *buffer; > + struct device *dev; > +}; > + > +void stm32fwu_spi_init(struct stm32fwu_fw *fw); > + > +#endif /*_STM32_CORE_H_ */ > diff --git a/drivers/misc/stm32fwu/stm32_spi.c b/drivers/misc/stm32fwu/stm32_spi.c > new file mode 100644 > index 0000000..d095aa6 > --- /dev/null > +++ b/drivers/misc/stm32fwu/stm32_spi.c > @@ -0,0 +1,108 @@ > +/* > + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include "stm32_core.h" > + > +static int stm32fwu_spi_write(struct stm32fwu_fw *fw, const u8 *buf, int len) len could be unsigned. > +{ > + struct spi_device *sdev = to_spi_device(fw->dev); > + > + struct spi_message m; > + struct spi_transfer t = { > + .len = len, > + .tx_buf = buf, > + .bits_per_word = 8, > + }; > + > + spi_message_init(&m); > + spi_message_add_tail(&t, &m); > + return spi_sync(sdev, &m); > +} > + > +static int stm32fwu_spi_read(struct stm32fwu_fw *fw, u8 *buf, int len) len could be unsigned. > +{ > + struct spi_device *sdev = to_spi_device(fw->dev); > + > + struct spi_message m; > + struct spi_transfer t = { > + .len = len, > + .rx_buf = buf, > + .bits_per_word = 8, > + }; > + > + spi_message_init(&m); > + spi_message_add_tail(&t, &m); > + return spi_sync(sdev, &m); > +} > + > +static int stm32fwu_spi_wait_for_ack(struct stm32fwu_fw *fw, int retires) retires should probably be called retries and could be unsigned. > +{ > + int ret, i = 0; > + u8 *buf = &fw->buffer[STM32FWU_MAX_BUFFER_SIZE]; > + > + while (i < retires) { > + ret = stm32fwu_spi_read(fw, buf, 1); > + if (ret < 0) { > + dev_err(fw->dev, > + "firmware upgrade wait for ack fail\n"); > + return ret; > + } > + > + if (fw->buffer[STM32FWU_MAX_BUFFER_SIZE] == STM32FWU_ACK || > + fw->buffer[STM32FWU_MAX_BUFFER_SIZE] == STM32FWU_ACK2) { > + return i; > + } > + > + if (fw->buffer[STM32FWU_MAX_BUFFER_SIZE] == STM32FWU_NACK) > + return -EPROTO; > + > + usleep_range(1000, 1100); > + i++; > + } > + > + dev_err(fw->dev, "fw ack timeout\n"); > + > + return -ETIMEDOUT; > +} > + > +static int stm32fwu_spi_send_cmd(struct stm32fwu_fw *fw, > + struct stm32fwu_cmd *cmd) > +{ > + int ret; > + > + fw->buffer[0] = STM32FWU_SPI_SOF; > + fw->buffer[1] = cmd->cmd; > + fw->buffer[2] = cmd->neg_cmd; > + > + ret = stm32fwu_spi_write(fw, fw->buffer, 3); > + if (ret < 0) { > + dev_err(fw->dev, "fw cmd write fail\n"); > + return ret; > + } > + > + return stm32fwu_spi_wait_for_ack(fw, cmd->timeout); > +} > + > +void stm32fwu_spi_init(struct stm32fwu_fw *fw) > +{ > + fw->write = stm32fwu_spi_write; > + fw->read = stm32fwu_spi_read; > + fw->wait_for_ack = stm32fwu_spi_wait_for_ack; > + fw->send_cmd = stm32fwu_spi_send_cmd; > +} > diff --git a/include/linux/stm32fwu.h b/include/linux/stm32fwu.h > new file mode 100644 > index 0000000..aa830d6 > --- /dev/null > +++ b/include/linux/stm32fwu.h > @@ -0,0 +1,47 @@ > +/* > + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef _STM32FWU_H_ > +#define _STM32FWU_H_ > + > +/** > + * enum stm32fwu_iface - upgrade interfaces for STM32 MCU's > + * @STM32_SPI: SPI interface. > + * @STM32_MAX: terminator. > + */ > +enum stm32fwu_iface { > + STM32_SPI, > + /* Generally for future use, i.e. UART upgrade algorithm looks pretty > + * similar. */ > + STM32_MAX > +}; > + > +struct stm32fwu_fw; > + > +struct stm32fwu_fw *stm32fwu_init(struct device *dev, > + enum stm32fwu_iface iface, const u8 *data, > + int len); > + > +void stm32fwu_destroy(struct stm32fwu_fw *fw); > + > +int stm32fwu_send_sync(struct stm32fwu_fw *fw); > + > +int stm32fwu_update(struct stm32fwu_fw *fw); > + > +int stm32fwu_get(struct stm32fwu_fw *fw); > + > +int stm32fwu_get_version(struct stm32fwu_fw *fw); > + > +#endif /* _STM32FWU_H_ */ > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/