Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751948AbaJ0AKh (ORCPT ); Sun, 26 Oct 2014 20:10:37 -0400 Received: from mailout.micron.com ([137.201.242.129]:26906 "EHLO mailout.micron.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751645AbaJ0AKg convert rfc822-to-8bit (ORCPT ); Sun, 26 Oct 2014 20:10:36 -0400 From: bpqw To: Marek Vasut , "dwmw2@infradead.org" , Brian Norris CC: "shijie8@gmail.com" , "geert+renesas@glider.be" , "grmoore@altera.com" , "linux-mtd@lists.infradead.org" , "linux-kernel@vger.kernel.org" , bpqw Subject: [PATCH 1/1 v3] driver:mtd:spi-nor: Add quad I/O support for Micron spi nor Thread-Topic: [PATCH 1/1 v3] driver:mtd:spi-nor: Add quad I/O support for Micron spi nor Thread-Index: AQHP2KkjagwG2in0R7+6ioZ2PHnYSpwTG1RugAKuPPCAAgpzkIADfZeAgBhBsxCABMQ/MIAGOkDwgASw+FA= Date: Mon, 27 Oct 2014 00:09:50 +0000 Message-ID: References: <201409251211.57183.marex@denx.de> <201409261046.07132.marex@denx.de> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.167.84.5] X-TM-AS-Product-Ver: SMEX-10.0.0.4152-7.000.1014-21056.003 X-TM-AS-Result: No-0.104300-0.000000-31 X-TM-AS-User-Approved-Sender: Yes X-TM-AS-User-Blocked-Sender: No x-mt-checkinternalsenderrule: True Content-Type: text/plain; charset="iso-2022-jp" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds code which enables Quad I/O mode on Micron SPI NOR flashes. For Micron SPI NOR flash, enabling or disabling quad I/O protocol is controlled by EVCR (Enhanced Volatile Configuration Register), Quad I/O protocol bit 7. When EVCR bit 7 is reset to 0, the SPI NOR flash will operate in quad I/O mode. Signed-off-by: bean huo Acked-by: Marek Vasut --- v1-v2:modified to that capture wait_till_ready() return value,if error,directly return its the value. v2-v3:directly use the reurning error value of read_reg and write_reg,instead of -EINVAL. drivers/mtd/spi-nor/spi-nor.c | 46 +++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/spi-nor.h | 6 ++++++ 2 files changed, 52 insertions(+) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index b5ad6be..486b167 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -878,6 +878,45 @@ static int spansion_quad_enable(struct spi_nor *nor) return 0; } +static int micron_quad_enable(struct spi_nor *nor) { + int ret, val; + + ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1); + if (ret < 0) { + dev_err(nor->dev, "error %d reading EVCR\n", ret); + return ret; + } + + write_enable(nor); + + /* set EVCR ,enable quad I/O */ + nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON; + ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0); + if (ret < 0) { + dev_err(nor->dev, + "error while writing EVCR register\n"); + return ret; + } + + ret = wait_till_ready(nor); + if (ret) + return ret; + + /* read EVCR and check it */ + ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1); + if (ret < 0) { + dev_err(nor->dev, "error %d reading EVCR\n", ret); + return ret; + } + if (val & EVCR_QUAD_EN_MICRON) { + dev_err(nor->dev, "Micron EVCR Quad bit not clear\n"); + return -EINVAL; + } + + return 0; +} + static int set_quad_mode(struct spi_nor *nor, u32 jedec_id) { int status; @@ -890,6 +929,13 @@ static int set_quad_mode(struct spi_nor *nor, u32 jedec_id) return -EINVAL; } return status; + case CFI_MFR_ST: + status = micron_quad_enable(nor); + if (status) { + dev_err(nor->dev, "Micron quad-read not enabled\n"); + return -EINVAL; + } + return status; default: status = spansion_quad_enable(nor); if (status) { diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 9e6294f..d71b659 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -56,6 +56,10 @@ /* Used for Spansion flashes only. */ #define SPINOR_OP_BRWR 0x17 /* Bank register write */ +/* Used for Micron flashes only. */ +#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ +#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ + /* Status Register bits. */ #define SR_WIP 1 /* Write in progress */ #define SR_WEL 2 /* Write enable latch */ @@ -67,6 +71,8 @@ #define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ +#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */ + /* Flag Status Register bits */ #define FSR_READY 0x80 -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/