Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754663AbaJ1VaJ (ORCPT ); Tue, 28 Oct 2014 17:30:09 -0400 Received: from down.free-electrons.com ([37.187.137.238]:36942 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751153AbaJ1VaF (ORCPT ); Tue, 28 Oct 2014 17:30:05 -0400 From: Maxime Ripard To: Vinod Koul , dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Laurent Pinchart , =?UTF-8?q?Antoine=20T=C3=A9nart?= , Russell King , lars@metafoo.de, Maxime Ripard Subject: [PATCH v4 11/58] dmaengine: pl08x: Split device_control Date: Tue, 28 Oct 2014 22:25:26 +0100 Message-Id: <1414531573-18807-12-git-send-email-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1414531573-18807-1-git-send-email-maxime.ripard@free-electrons.com> References: <1414531573-18807-1-git-send-email-maxime.ripard@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Split the device_control callback of the AMBA PL08x DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard --- drivers/dma/amba-pl08x.c | 156 +++++++++++++++++++++++++++-------------------- 1 file changed, 90 insertions(+), 66 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index e34024b000a4..aa99c13b5666 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1386,32 +1386,6 @@ static u32 pl08x_get_cctl(struct pl08x_dma_chan *plchan, return pl08x_cctl(cctl); } -static int dma_set_runtime_config(struct dma_chan *chan, - struct dma_slave_config *config) -{ - struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - struct pl08x_driver_data *pl08x = plchan->host; - - if (!plchan->slave) - return -EINVAL; - - /* Reject definitely invalid configurations */ - if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || - config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) - return -EINVAL; - - if (config->device_fc && pl08x->vd->pl080s) { - dev_err(&pl08x->adev->dev, - "%s: PL080S does not support peripheral flow control\n", - __func__); - return -EINVAL; - } - - plchan->cfg = *config; - - return 0; -} - /* * Slave transactions callback to the slave device to allow * synchronization of slave DMA signals with the DMAC enable @@ -1693,20 +1667,71 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic( return vchan_tx_prep(&plchan->vc, &txd->vd, flags); } -static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, - unsigned long arg) +static int pl08x_config(struct dma_chan *chan, + struct dma_slave_config *config) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_driver_data *pl08x = plchan->host; + + if (!plchan->slave) + return -EINVAL; + + /* Reject definitely invalid configurations */ + if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || + config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) + return -EINVAL; + + if (config->device_fc && pl08x->vd->pl080s) { + dev_err(&pl08x->adev->dev, + "%s: PL080S does not support peripheral flow control\n", + __func__); + return -EINVAL; + } + + plchan->cfg = *config; + + return 0; +} + +static int pl08x_terminate_all(struct dma_chan *chan) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; unsigned long flags; - int ret = 0; - /* Controls applicable to inactive channels */ - if (cmd == DMA_SLAVE_CONFIG) { - return dma_set_runtime_config(chan, - (struct dma_slave_config *)arg); + spin_lock_irqsave(&plchan->vc.lock, flags); + if (!plchan->phychan && !plchan->at) { + spin_unlock_irqrestore(&plchan->vc.lock, flags); + return 0; } + plchan->state = PL08X_CHAN_IDLE; + + if (plchan->phychan) { + /* + * Mark physical channel as free and free any slave + * signal + */ + pl08x_phy_free(plchan); + } + /* Dequeue jobs and free LLIs */ + if (plchan->at) { + pl08x_desc_free(&plchan->at->vd); + plchan->at = NULL; + } + /* Dequeue jobs not yet fired as well */ + pl08x_free_txd_list(pl08x, plchan); + + spin_unlock_irqrestore(&plchan->vc.lock, flags); + + return 0; +} + +static int pl08x_pause(struct dma_chan *chan) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + unsigned long flags; + /* * Anything succeeds on channels with no physical allocation and * no queued transfers. @@ -1717,42 +1742,35 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, return 0; } - switch (cmd) { - case DMA_TERMINATE_ALL: - plchan->state = PL08X_CHAN_IDLE; + pl08x_pause_phy_chan(plchan->phychan); + plchan->state = PL08X_CHAN_PAUSED; - if (plchan->phychan) { - /* - * Mark physical channel as free and free any slave - * signal - */ - pl08x_phy_free(plchan); - } - /* Dequeue jobs and free LLIs */ - if (plchan->at) { - pl08x_desc_free(&plchan->at->vd); - plchan->at = NULL; - } - /* Dequeue jobs not yet fired as well */ - pl08x_free_txd_list(pl08x, plchan); - break; - case DMA_PAUSE: - pl08x_pause_phy_chan(plchan->phychan); - plchan->state = PL08X_CHAN_PAUSED; - break; - case DMA_RESUME: - pl08x_resume_phy_chan(plchan->phychan); - plchan->state = PL08X_CHAN_RUNNING; - break; - default: - /* Unknown command */ - ret = -ENXIO; - break; + spin_unlock_irqrestore(&plchan->vc.lock, flags); + + return 0; +} + +static int pl08x_resume(struct dma_chan *chan) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + unsigned long flags; + + /* + * Anything succeeds on channels with no physical allocation and + * no queued transfers. + */ + spin_lock_irqsave(&plchan->vc.lock, flags); + if (!plchan->phychan && !plchan->at) { + spin_unlock_irqrestore(&plchan->vc.lock, flags); + return 0; } + pl08x_resume_phy_chan(plchan->phychan); + plchan->state = PL08X_CHAN_RUNNING; + spin_unlock_irqrestore(&plchan->vc.lock, flags); - return ret; + return 0; } bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) @@ -2048,7 +2066,10 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) pl08x->memcpy.device_prep_dma_interrupt = pl08x_prep_dma_interrupt; pl08x->memcpy.device_tx_status = pl08x_dma_tx_status; pl08x->memcpy.device_issue_pending = pl08x_issue_pending; - pl08x->memcpy.device_control = pl08x_control; + pl08x->memcpy.device_config = pl08x_config; + pl08x->memcpy.device_pause = pl08x_pause; + pl08x->memcpy.device_resume = pl08x_resume; + pl08x->memcpy.device_terminate_all = pl08x_terminate_all; /* Initialize slave engine */ dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask); @@ -2061,7 +2082,10 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) pl08x->slave.device_issue_pending = pl08x_issue_pending; pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg; pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic; - pl08x->slave.device_control = pl08x_control; + pl08x->slave.device_config = pl08x_config; + pl08x->slave.device_pause = pl08x_pause; + pl08x->slave.device_resume = pl08x_resume; + pl08x->slave.device_terminate_all = pl08x_terminate_all; /* Get the platform data */ pl08x->pd = dev_get_platdata(&adev->dev); -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/