Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932104AbaJ1Vai (ORCPT ); Tue, 28 Oct 2014 17:30:38 -0400 Received: from down.free-electrons.com ([37.187.137.238]:37078 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755026AbaJ1Vae (ORCPT ); Tue, 28 Oct 2014 17:30:34 -0400 From: Maxime Ripard To: Vinod Koul , dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Laurent Pinchart , =?UTF-8?q?Antoine=20T=C3=A9nart?= , Russell King , lars@metafoo.de, Maxime Ripard Subject: [PATCH v4 02/58] serial: at91: Use dmaengine_slave_config API Date: Tue, 28 Oct 2014 22:25:17 +0100 Message-Id: <1414531573-18807-3-git-send-email-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 2.1.1 In-Reply-To: <1414531573-18807-1-git-send-email-maxime.ripard@free-electrons.com> References: <1414531573-18807-1-git-send-email-maxime.ripard@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org We are removing the dmaengine_device_control API, that shouldn't even have been exposed in the first place. Change the callers to use the proper API. Signed-off-by: Maxime Ripard --- drivers/tty/serial/atmel_serial.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index edde3eca055d..10e6b382d68f 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -862,9 +862,8 @@ static int atmel_prepare_tx_dma(struct uart_port *port) config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.dst_addr = port->mapbase + ATMEL_US_THR; - ret = dmaengine_device_control(atmel_port->chan_tx, - DMA_SLAVE_CONFIG, - (unsigned long)&config); + ret = dmaengine_slave_config(atmel_port->chan_tx, + &config); if (ret) { dev_err(port->dev, "DMA tx slave configuration failed\n"); goto chan_err; @@ -1026,9 +1025,8 @@ static int atmel_prepare_rx_dma(struct uart_port *port) config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.src_addr = port->mapbase + ATMEL_US_RHR; - ret = dmaengine_device_control(atmel_port->chan_rx, - DMA_SLAVE_CONFIG, - (unsigned long)&config); + ret = dmaengine_slave_config(atmel_port->chan_rx, + &config); if (ret) { dev_err(port->dev, "DMA rx slave configuration failed\n"); goto chan_err; -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/