Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 9 Feb 2001 10:59:35 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 9 Feb 2001 10:59:15 -0500 Received: from expanse.dds.nl ([194.109.10.118]:23815 "EHLO expanse.dds.nl") by vger.kernel.org with ESMTP id ; Fri, 9 Feb 2001 10:59:06 -0500 Date: Fri, 9 Feb 2001 16:58:37 +0100 From: Ookhoi To: elmer@ylenurme.ee Cc: linux-kernel@vger.kernel.org Subject: aironet4500_card (2.4.1-ac8), The PCI BIOS has not enabled this device! Message-ID: <20010209165837.K4103@ookhoi.dds.nl> Reply-To: ookhoi@dds.nl Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.14i X-Uptime: 3:35pm up 10 days, 2:39, 15 users, load average: 0.07, 0.35, 0.19 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, When I insmod aironet4500_core and aironet4500_card, the last one disables the pci342 nic (the leds go out). root@tilde:~# uname -r 2.4.1-ac8 root@tilde:~# insmod aironet4500_core Using /lib/modules/2.4.1-ac8/kernel/drivers/net/aironet4500_core.o Warning: /lib/modules/2.4.1-ac8/kernel/drivers/net/aironet4500_core.o symbol for parameter rx_queue_len not found root@tilde:~# insmod aironet4500_card Using /lib/modules/2.4.1-ac8/kernel/drivers/net/aironet4500_card.o This is in /var/log/syslog: Feb 9 16:43:25 tilde kernel: aironet4500.c v0.1 1/1/99 Elmer Joandi, elmer@ylenurme.ee. Feb 9 16:43:34 tilde kernel: aironet4500_cards.c v0.2 Feb 27, 2000 Elmer Joandi, elmer@ylenurme.ee. Feb 9 16:43:34 tilde kernel: Feb 9 16:43:34 tilde kernel: <6> The PCI BIOS has not enabled this device! Updating PCI command 0003->0103. Feb 9 16:43:34 tilde kernel: eth1: 340 Series 802.11 Direct Sequence found @ 0x6100 irq 10 firmwareVersion 920 Until I insmod the aironet4500_card, the yellow led is on. A rmmod doesn't change a thing. According to the documentation, both leds off means "no power" or "an error". -ac7 is the same (there is extra stuff for aironet4500 in -ac8). I compile the kernel on a different computer, and then transfer bzImage, the modules directory and System.map to the computer with the pci card. I don't think it should make a difference though. root@tilde:~# lspci -v 00:00.0 Host bridge: Intel Corporation 430VX - 82437VX TVX [Triton VX] (rev 01) Flags: bus master, medium devsel, latency 32 00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01) Flags: bus master, medium devsel, latency 0 00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 32 I/O ports at f000 [size=16] 00:08.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54) (prog-if 00 [VGA]) Flags: medium devsel, IRQ 11 Memory at e0000000 (32-bit, non-prefetchable) [size=64M] Expansion ROM at [disabled] [size=64K] 00:0b.0 Network controller: AIRONET Wireless Communications: Unknown device 4800 (rev 01) Flags: medium devsel, IRQ 10 Memory at e4000000 (32-bit, non-prefetchable) [size=128] I/O ports at 6000 [size=128] I/O ports at 6100 [size=64] Can I provide more info on this? What can I do to help to solve this? Ookhoi - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/