Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757453AbaJaQOT (ORCPT ); Fri, 31 Oct 2014 12:14:19 -0400 Received: from mail-ie0-f170.google.com ([209.85.223.170]:52115 "EHLO mail-ie0-f170.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751457AbaJaQOR (ORCPT ); Fri, 31 Oct 2014 12:14:17 -0400 MIME-Version: 1.0 Reply-To: cw00.choi@samsung.com In-Reply-To: References: <1414759083-4555-1-git-send-email-a.kesavan@samsung.com> <545384D3.5050000@samsung.com> Date: Sat, 1 Nov 2014 01:14:16 +0900 Message-ID: Subject: Re: [PATCH] iio: adc: exynos_adc: Add support for ADCv3 on exynos7 From: Chanwoo Choi To: Abhilash Kesavan Cc: linux-iio@vger.kernel.org, jic23@kernel.org, Naveen Krishna , "linux-kernel@vger.kernel.org" Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Abhilash, On Fri, Oct 31, 2014 at 11:01 PM, Abhilash Kesavan wrote: > Hi Chanwoo, > > Thanks for the quick response. > > On Fri, Oct 31, 2014 at 6:17 PM, Chanwoo Choi wrote: >> Hi Abhilash, >> >> On 10/31/2014 09:38 PM, Abhilash Kesavan wrote: >>> The ADC on exynos7 is quite similar to ADCv2. The differences are as >>> follows: >>> - v3 has 8 input channels (10 in v2). >>> - v3 does not include an ADC PHY control register. >>> - Some ADC_CON2 register bits being used in v2 are listed as >>> reserved in v3. This results in a different init_hw function >>> for v3. >>> >>> Signed-off-by: Abhilash Kesavan >>> --- >>> - Based on Naveen's "iio: exynos-adc: use syscon instead of ioremap" patchset >>> http://comments.gmane.org/gmane.linux.kernel.iio/13943 >>> >>> .../devicetree/bindings/arm/samsung/exynos-adc.txt | 2 ++ >>> drivers/iio/adc/exynos_adc.c | 32 ++++++++++++++++++++ >>> 2 files changed, 34 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt >>> index c368210..a11e32c 100644 >>> --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt >>> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt >>> @@ -14,6 +14,8 @@ Required properties: >>> for exynos4412/5250 and s5pv210 controllers. >>> Must be "samsung,exynos-adc-v2" for >>> future controllers. >>> + Must be "samsung,exynos-adc-v3" for >>> + the ADC in Exynos7 and compatibles >> >> I prefer to use 'exynos7-adc' instead of 'exynos-adc-v3'. >> Exynos7 has little different from existing ADCv2. > > Sure, I'll change it. The reason for my choosing v3 was that reading > the version register (0x20 offset) showed a value of 0x80000009 in > Exynos7 as against 0x80000008 in both 5420 and 3250. >> >> Also, If you want to use 'exynos-adc-v3' compatible, >> Exynos7's TRM have to include the correct version(v3) infromation. > > I could not see any mention of the ADC controller version in the > Exynos7 UM other than the version register. Does that mean it is v2 ? So am I. I don't see any version number of ADC in Exynos TRM. Additionally, I have a question about Exynos7. If you possible, did you tell me about full name of Exynos7 SoC (e.g., Exynos5433, Exynos52..)? Best Regards, Chanwoo Choi > > Regards, > Abhilash >> >> Thanks, >> Chanwoo Choi >> >> >> >>> Must be "samsung,exynos3250-adc" for >>> controllers compatible with ADC of Exynos3250. >>> Must be "samsung,s3c2410-adc" for >>> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c >>> index fe03177..74d0a9d 100644 >>> --- a/drivers/iio/adc/exynos_adc.c >>> +++ b/drivers/iio/adc/exynos_adc.c >>> @@ -390,6 +390,35 @@ static const struct exynos_adc_data exynos3250_adc_data = { >>> .start_conv = exynos_adc_v2_start_conv, >>> }; >>> >>> +static void exynos_adc_v3_init_hw(struct exynos_adc *info) >>> +{ >>> + u32 con1, con2; >>> + >>> + if (info->data->needs_adc_phy) >>> + regmap_write(info->pmu_map, info->data->phy_offset, 1); >>> + >>> + con1 = ADC_V2_CON1_SOFT_RESET; >>> + writel(con1, ADC_V2_CON1(info->regs)); >>> + >>> + con2 = readl(ADC_V2_CON2(info->regs)); >>> + con2 &= ~ADC_V2_CON2_C_TIME(7); >>> + con2 |= ADC_V2_CON2_C_TIME(0); >>> + writel(con2, ADC_V2_CON2(info->regs)); >>> + >>> + /* Enable interrupts */ >>> + writel(1, ADC_V2_INT_EN(info->regs)); >>> +} >>> + >>> +static const struct exynos_adc_data exynos_adc_v3_data = { >>> + .num_channels = MAX_ADC_V1_CHANNELS, >>> + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ >>> + >>> + .init_hw = exynos_adc_v3_init_hw, >>> + .exit_hw = exynos_adc_v2_exit_hw, >>> + .clear_irq = exynos_adc_v2_clear_irq, >>> + .start_conv = exynos_adc_v2_start_conv, >>> +}; >>> + >>> static const struct of_device_id exynos_adc_match[] = { >>> { >>> .compatible = "samsung,s3c2410-adc", >>> @@ -413,6 +442,9 @@ static const struct of_device_id exynos_adc_match[] = { >>> .compatible = "samsung,exynos-adc-v2", >>> .data = &exynos_adc_v2_data, >>> }, { >>> + .compatible = "samsung,exynos-adc-v3", >>> + .data = &exynos_adc_v3_data, >>> + }, { >>> .compatible = "samsung,exynos3250-adc", >>> .data = &exynos3250_adc_data, >>> }, >>> >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/