Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752830AbaKBUoR (ORCPT ); Sun, 2 Nov 2014 15:44:17 -0500 Received: from mail.eperm.de ([89.247.134.16]:54251 "EHLO mail.eperm.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752788AbaKBUoI convert rfc822-to-8bit (ORCPT ); Sun, 2 Nov 2014 15:44:08 -0500 X-AuthUser: sm@eperm.de From: Stephan Mueller To: Herbert Xu Cc: "David S. Miller" , Marek Vasut , Jason Cooper , Grant Likely , Geert Uytterhoeven , Linux Kernel Developers List , linux-crypto@vger.kernel.org Subject: [PATCH v2 01/11] crypto: Documentation - crypto API high level spec Date: Sun, 02 Nov 2014 21:35:11 +0100 Message-ID: <4163724.RCMDlx8dmE@tachyon.chronox.de> User-Agent: KMail/4.14.1 (Linux/3.17.1-302.fc21.x86_64; KDE/4.14.1; x86_64; ; ) In-Reply-To: <6375771.bx7QqLJLuR@tachyon.chronox.de> References: <6375771.bx7QqLJLuR@tachyon.chronox.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8BIT Content-Type: text/plain; charset="iso-8859-1" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The design of the kernel crypto API as well as hints to program with the kernel crypto API are given. The documentation contains: * design aspects of crypto API * develper specific hints * references to the API function description Signed-off-by: Stephan Mueller CC: Marek Vasut --- Documentation/crypto/crypto-API-spec.txt | 721 +++++++++++++++++++++++++++++++ 1 file changed, 721 insertions(+) create mode 100644 Documentation/crypto/crypto-API-spec.txt diff --git a/Documentation/crypto/crypto-API-spec.txt b/Documentation/crypto/crypto-API-spec.txt new file mode 100644 index 0000000..8a24c98 --- /dev/null +++ b/Documentation/crypto/crypto-API-spec.txt @@ -0,0 +1,721 @@ +Kernel Crypto API Interface Specification +========================================= + +The kernel crypto API offers a rich set of cryptographic ciphers as well as +other data transformation mechanisms and methods to invoke these. This document +contains a description of the API and provides example code. + +To understand and properly use the kernel crypto API a brief explanation of its +structure is given. Based on the architecture, the API can be separated into +different components. Following the architecture specification, hints to +developers of ciphers are provided. Pointers to the API function call +documentation are given at the end. + +The kernel crypto API refers to all algorithms as "transformation". Therefore, a +cipher handle variable usually has the name "tfm". Besides cryptographic +operations, the kernel crypto API also knows compression transforms and handles +them the same way as ciphers. + +The kernel crypto API serves the following entity types: + + * consumers requesting cryptographic services + + * data transformation implementations (typically ciphers) that + can be called by consumers using the kernel crypto API + +This specification is intended for consumers of the kernel crypto API as well +as for developers implementing ciphers. This API specification, however, does +not discusses all API calls available to data transformation implementations +((i.e. implementations of ciphers and other transformations (such as CRC or +even compression algorithms) that can register with the kernel crypto API). + +Note: The terms "transformation" and cipher algorithm are used interchangably. + + +Terminology +----------- + +The transformation implementation is an actual code or interface to hardware +which implements a certain transformation with precisely defined behavior. + +The transformation object (TFM) is an instance of a transformation +implementation. There can be multiple transformation objects associated with +a single transformation implementation. Each of those transformation objects +is held by a crypto API consumer or another transformation. Transformation +object is allocated when a crypto API consumer requests a transformation +implementation. The consumer is then provided with a structure, which contains +a transformation object (TFM). + +The transformation context is private data associated with the transformation +object. + + +Kernel Crypto API Architecture +============================== + +Cipher algorithm types +---------------------- + +The kernel crypto API provides different API calls for the following cipher +types: + + * Symmetric ciphers + + * AEAD ciphers + + * Message digest, including keyed message digest + + * Random number generation + + * User space interface + + +Ciphers and Templates +--------------------- + +The kernel crypto API provides implementations of single block ciphers and +message digests. In addition, the kernel crypto API provides numerous +"templates" that can be used in conjunction with the single block ciphers and +message digests. Templates include all types of block chaining mode, the HMAC +mechanism, etc. + +Single block ciphers and message digests can either be directly used by a +caller or invoked together with a template to form multi-block ciphers or keyed +message digests. + +A single block cipher may even be called with multiple templates. However, +templates cannot be used without a single cipher. + + +Synchronous and asynchronous operation +-------------------------------------- + +The kernel crypto API provides synchronous and asynchronous API operations. + +When using the synchronous API operation, the caller invokes a cipher operation +which is performed synchronously by the kernel crypto API. That means, the +caller waits until the cipher operation completes. Therefore, the kernel crypto +API calls work like regular function calls. For synchronous operation, the set +of API calls is small and conceptually similar to any other crypto library. + +Asynchronous operation is provided by the kernel crypto API which implies that +the invocation of a cipher operation will complete almost instantly. That +invocation triggers the cipher operation but it does not signal its completion. +Before invoking a cipher operation, the caller must provide a callback function +the kernel crypto API can invoke to signal the completion of the cipher +operation. Furthermore, the caller must ensure it can handle such asynchronous +events by applying appropriate locking around its data. The kernel crypto API +does not perform any special serialization operation to protect the caller's +data integrity. + + +Kernel crypto API cipher references and priority +------------------------------------------------ + +A cipher is referenced by the caller with a string. That string has the +following semantics: + + template(single block cipher) + +where "template" and "single block cipher" is the aforementioned template and +single block cipher, respectively. If applicable, additional templates may +enclose other templates, such as + + template1(template2(single block cipher))) + +The kernel crypto API may provide multiple implementations of a template or a +single block cipher. For example, AES on newer Intel hardware has the following +implementations: AES-NI, assembler implementation, or straight C. Now, when +using the string "aes" with the kernel crypto API, which cipher implementation +is used? The answer to that question is the priority number assigned to each +cipher implementation by the kernel crypto API. When a caller uses the string to +refer to a cipher during initialization of a cipher handle, the kernel crypto +API looks up all implementations providing an implementation with that name and +selects the implementation with the highest priority. + +Now, a caller may have the need to refer to a specific cipher implementation and +thus does not want to rely on the priority-based selection. To accommodate this +scenario, the kernel crypto API allows the cipher implementation to register a +unique name in addition to common names. When using that unique name, a caller +is therefore always sure to refer to the intended cipher implementation. + +The list of available ciphers is given in /proc/crypto. When reading that file, +all available ciphers are listed. However, that list does not specify all +possible permutations of templates and ciphers. Each block listed in +/proc/crypto contains the following information: + + * name: the generic name of the cipher that is subject to the + priority-based selection -- this name can be used by the cipher + allocation API calls + + * driver: the unique name of the cipher -- this name can be used by the + cipher allocation API calls + + * module: the kernel module providing the cipher implementation (or + "kernel" for statically linked ciphers) + + * priority: the priority value of the cipher implementation + + * refcnt: the reference count of the respective cipher (i.e. the number + of current consumers of this cipher) + + * selftest: specification whether the self test for the cipher passed + + * type: + - blkcipher for symmetric block ciphers + - ablkcipher for asymmetric block ciphers + - cipher for single block ciphers that may be used with an + additional template + - shash for symmetric message digest + - ahash for asymmetric message digest + - aead for AEAD cipher type + - compression for compression type transforms + - rng for random number generator + - givcipher for cipher with associated IV generator + + * blocksize: blocksize of cipher in bytes + + * keysize: key size in bytes + + * ivsize: IV size in bytes + + * seedsize: required size of seed data for random number generator + + * digestsize: output size of the message digest + + * geniv: IV generation type: + - eseqiv for encrypted sequence number based IV generation + - seqiv for sequence number based IV generation + - chainiv for chain iv generation + - is a marker that the cipher implements IV generation + and handling as it is specific to the given cipher + + +Key sizes +--------- + +When allocating a cipher handle, the caller only specifies the cipher type. +Symmetric ciphers, however, typically support multiple key sizes (e.g. AES-128 +vs. AES-192 vs. AES-256). These key sizes are determined with the length of the +provided key. Thus, the kernel crypto API does not provide a separate way to +select the particular symmetric cipher key size. + + +Cipher allocation type and masks +-------------------------------- + +The different cipher handle allocation functions allow the specification of a +type and mask flag. Both parameters have the following meaning (and are +therefore not covered in the subsequent sections). + +The type flag specifies the type of the cipher algorithm. The caller usually +provides a 0 when the caller wants the default handling. Otherwise, the caller +may provide the following selections which match the the aforementioned cipher +types: + + * CRYPTO_ALG_TYPE_CIPHER Raw block cipher + * CRYPTO_ALG_TYPE_COMPRESS Compression + * CRYPTO_ALG_TYPE_AEAD Authenticated Encryption with Associated Data (MAC) + * CRYPTO_ALG_TYPE_BLKCIPHER Synchronous multi-block cipher + * CRYPTO_ALG_TYPE_ABLKCIPHER Asynchronous multi-block cipher + * CRYPTO_ALG_TYPE_GIVCIPHER + * CRYPTO_ALG_TYPE_DIGEST Raw message digest + * CRYPTO_ALG_TYPE_HASH Alias for CRYPTO_ALG_TYPE_DIGEST + * CRYPTO_ALG_TYPE_SHASH Synchronous multi-block hash + * CRYPTO_ALG_TYPE_AHASH Asynchronous multi-block hash + * CRYPTO_ALG_TYPE_RNG Random Number Generation + * CRYPTO_ALG_TYPE_PCOMPRESS + +The mask flag restricts the type of cipher. The only allowed flag is +CRYPTO_ALG_ASYNC to restrict the cipher lookup function to asynchronous ciphers. +Usually, a caller provides a 0 for the mask flag. + +When the caller provides a mask and type specification, the caller limits the +kernel crypto API?s search for a suitable cipher implementation for the given +cipher name. That means, even when a caller uses a cipher name that exists +during its initialization call, the kernel crypto API may not select it due +to the used type and mask field. + + +Developing Cipher Algorithms +============================ + +Registering and unregistering transformation +--------------------------------------------- + +There are three distinct types of registration functions in the Crypto API. +One is used to register a generic cryptographic transformation, while the +other two are specific to HASH transformations and COMPRESSion. We will +discuss the latter two in a separate chapter, here we will only look at +the generic ones. + +The generic registration functions can be found in include/linux/crypto.h +and their definition can be seen below. The former function registers a +single transformation, while the latter works on an array of transformation +descriptions. The latter is useful when registering transformations in bulk. + + int crypto_register_alg(struct crypto_alg *alg); + int crypto_register_algs(struct crypto_alg *algs, int count); + +The counterparts to those functions are listed below. + + int crypto_unregister_alg(struct crypto_alg *alg); + int crypto_unregister_algs(struct crypto_alg *algs, int count); + +Notice that both registration and unregistration functions do return a value, +so make sure to handle errors. + +The bulk registration / unregistration functions require that struct crypto_alg +is an array of count size. These functions simply loop over that array and +register / unregister each individual algorithm. If an error occurs, the +loop is terminated at the offending algorithm definition. That means, the +algorithms prior to the offending algorithm are successfully registered. + +Single-block ciphers [CIPHER] +----------------------------- +Example of transformations: aes, arc4, ... + +This section describes the simplest of all transformation implementations, +that being the CIPHER type. The CIPHER type is used for transformations +which operate on exactly one block at a time and there are no dependencies +between blocks at all. + +Registration specifics +...................... + +The registration of [CIPHER] algorithm is specific in that struct crypto_alg +field .cra_type is empty. The .cra_u.cipher has to be filled in with proper +callbacks to implement this transformation. + +Fields in struct cipher_alg explained +..................................... + +This section explains the .cra_u.cipher fields and how they are called. +All of the fields are mandatory and must be filled: + + .cia_min_keysize ... Minimum key size supported by the transformation. + - This is the smallest key length supported by this + transformation algorithm. This must be set to one + of the pre-defined values as this is not hardware + specific. + - Possible values for this field can be found via: + $ git grep "_MIN_KEY_SIZE" include/crypto/ + .cia_max_keysize ... Maximum key size supported by the transformation. + - This is the largest key length supported by this + transformation algorithm. This must be set to one + of the pre-defined values as this is not hardware + specific. + - Possible values for this field can be found via: + $ git grep "_MAX_KEY_SIZE" include/crypto/ + .cia_setkey() ...... Set key for the transformation. + - This function is used to either program a supplied + key into the hardware or store the key in the + transformation context for programming it later. Note + that this function does modify the transformation + context. + - This function can be called multiple times during + the existence of the transformation object, so one + must make sure the key is properly reprogrammed + into the hardware. + - This function is also responsible for checking the + key length for validity. + - In case a software fallback was put in place in + the .cra_init() call, this function might need to + use the fallback if the algorithm doesn't support + all of the key sizes. + .cia_encrypt() ..... Encrypt a single block. + - This function is used to encrypt a single block of + data, which must be .cra_blocksize big. This always + operates on a full .cra_blocksize and it is not + possible to encrypt a block of smaller size. The + supplied buffers must therefore also be at least + of .cra_blocksize size. + - Both the input and output buffers are always aligned + to .cra_alignmask . In case either of the input or + output buffer supplied by user of the crypto API is + not aligned to .cra_alignmask, the crypto API will + re-align the buffers. The re-alignment means that a + new buffer will be allocated, the data will be copied + into the new buffer, then the processing will happen + on the new buffer, then the data will be copied back + into the original buffer and finally the new buffer + will be freed. + - In case a software fallback was put in place in + the .cra_init() call, this function might need to + use the fallback if the algorithm doesn't support + all of the key sizes. + - In case the key was stored in transformation context, + the key might need to be re-programmed into the + hardware in this function. + - This function shall not modify the transformation + context, as this function may be called in parallel + with the same transformation object. + .cia_decrypt() ..... Decrypt a single block. + - This is a reverse counterpart to .cia_encrypt(), and + the conditions are exactly the same. + +Here are schematics of how these functions are called when operated from +other part of the kernel. Note that the .cia_setkey() call might happen +before or after any of these schematics happen, but must not happen during +any of these are in-flight. + + KEY ---. PLAINTEXT ---. + v v + .cia_setkey() -> .cia_encrypt() + | + '-----> CIPHERTEXT + +Please note that a pattern where .cia_setkey() is called multiple times +is also valid: + + KEY1 --. PLAINTEXT1 --. KEY2 --. PLAINTEXT2 --. + v v v v + .cia_setkey() -> .cia_encrypt() -> .cia_setkey() -> .cia_encrypt() + | | + '---> CIPHERTEXT1 '---> CIPHERTEXT2 + + +Multi-block ciphers [BLKCIPHER] [ABLKCIPHER] +-------------------------------------------- + +Example of transformations: cbc(aes), ecb(arc4), ... + +This section describes the multi-block cipher transformation implementations +for both synchronous [BLKCIPHER] and asynchronous [ABLKCIPHER] case. The +multi-block ciphers are used for transformations which operate on scatterlists +of data supplied to the transformation functions. They output the result into +a scatterlist of data as well. + +Registration specifics +...................... + +The registration of [BLKCIPHER] or [ABLKCIPHER] algorithms is one of the most +standard procedures throughout the crypto API. There are no specifics for +this case other that re-aligning of input and output buffers does not happen +automatically within the crypto API, but is the responsibility of the crypto +API consumer. The crypto API consumer shall use crypto_blkcipher_alignmask() +or crypto_ablkcipher_alignmask() respectively to determine the needs of the +transformation object and prepare the scatterlist with data accordingly. + +Fields in struct blkcipher_alg and struct ablkcipher_alg explained +.................................................................. + +This section explains the .cra_u.blkcipher and .cra_u.cra_ablkcipher fields +and how they are called. Please note that this is very similar to the basic +CIPHER case for all but minor details. All of the fields but .geniv are +mandatory and must be filled: + + .min_keysize ... Minimum key size supported by the transformation. + - This is the smallest key length supported by this + transformation algorithm. This must be set to one + of the pre-defined values as this is not hardware + specific. + - Possible values for this field can be found via: + $ git grep "_MIN_KEY_SIZE" include/crypto/ + .max_keysize ... Maximum key size supported by the transformation. + - This is the largest key length supported by this + transformation algorithm. This must be set to one + of the pre-defined values as this is not hardware + specific. + - Possible values for this field can be found via: + $ git grep "_MAX_KEY_SIZE" include/crypto/ + .setkey() ...... Set key for the transformation. + - This function is used to either program a supplied + key into the hardware or store the key in the + transformation context for programming it later. Note + that this function does modify the transformation + context. + - This function can be called multiple times during + the existence of the transformation object, so one + must make sure the key is properly reprogrammed + into the hardware. + - This function is also responsible for checking the + key length for validity. + - In case a software fallback was put in place in + the .cra_init() call, this function might need to + use the fallback if the algorithm doesn't support + all of the key sizes. + .encrypt() ..... Encrypt a scatterlist of blocks. + - This function is used to encrypt the supplied + scatterlist containing the blocks of data. The crypto + API consumer is responsible for aligning the entries + of the scatterlist properly and making sure the + chunks are correctly sized. + - In case a software fallback was put in place in + the .cra_init() call, this function might need to + use the fallback if the algorithm doesn't support + all of the key sizes. + - In case the key was stored in transformation context, + the key might need to be re-programmed into the + hardware in this function. + - This function shall not modify the transformation + context, as this function may be called in parallel + with the same transformation object. + .decrypt() ..... Decrypt a single block. + - This is a reverse counterpart to .encrypt(), and the + conditions are exactly the same. + +Please refer to the single block cipher description for schematics of the block +cipher usage. The usage patterns are exactly the same for [ABLKCIPHER] and +[BLKCIPHER] as they are for plain [CIPHER]. + +Specifics of asynchronous multi-block cipher +............................................ + +There are a couple of specifics to the [ABLKCIPHER] interface. + +First of all, some of the drivers will want to use the Generic ScatterWalk +in case the hardware needs to be fed separate chunks of the scatterlist +which contains the plaintext and will contain the ciphertext. Please refer +below for a description and usage of the Generic ScatterWalk interface. + +It is recommended to enqueue cryptographic transformation requests into +generic crypto queues. This allows for these requests to be processed in +sequence as the cryptographic hardware becomes free. + + +Hashing [HASH] +-------------- + +Example of transformations: crc32, md5, sha1, sha256,... + +Registering and unregistering the transformation +................................................ + +There are multiple ways to register a HASH transformation, depending on +whether the transformation is synchronous [SHASH] or asynchronous [AHASH] +and the amount of HASH transformations we are registering. You can find +the prototypes defined in include/crypto/internal/hash.h : + + int crypto_register_ahash(struct ahash_alg *alg); + + int crypto_register_shash(struct shash_alg *alg); + int crypto_register_shashes(struct shash_alg *algs, int count); + +The respective counterparts for unregistering the HASH transformation are +as follows: + + int crypto_unregister_ahash(struct ahash_alg *alg); + + int crypto_unregister_shash(struct shash_alg *alg); + int crypto_unregister_shashes(struct shash_alg *algs, int count); + +Common fields of struct shash_alg and ahash_alg explained +......................................................... + +For definition of these structures, please refer to include/crypto/hash.h . +We will now explain the meaning of each field: + + .init() ......... Initialize the transformation context. + - Intended only to initialize the state of the HASH + transformation at the begining. This shall fill in + the internal structures used during the entire duration + of the whole transformation. + - No data processing happens at this point. + .update() ....... Push chunk of data into the driver for transformation. + - This function actually pushes blocks of data from upper + layers into the driver, which then passes those to the + hardware as seen fit. + - This function must not finalize the HASH transformation, + this only adds more data into the transformation. + - This function shall not modify the transformation + context, as this function may be called in parallel + with the same transformation object. + - Data processing can happen synchronously [SHASH] or + asynchronously [AHASH] at this point. + .final() ....... Retrieve result from the driver. + - This function finalizes the transformation and retrieves + the resulting hash from the driver and pushes it back to + upper layers. + - No data processing happens at this point. + .finup() ........ Combination of update()+final() . + - This function is effectively a combination of update() + and final() calls issued in sequence. + - As some hardware cannot do update() and final() + separately, this callback was added to allow such + hardware to be used at least by IPsec. + - Data processing can happen synchronously [SHASH] or + asynchronously [AHASH] at this point. + .digest() ....... Combination of init()+update()+final() . + - This function effectively behaves as the entire chain + of operations, init(), update() and final() issued in + sequence. + - Just like .finup(), this was added for hardware which + cannot do even the .finup(), but can only do the whole + transformation in one run. + - Data processing can happen synchronously [SHASH] or + asynchronously [AHASH] at this point. + + .setkey() ....... Set optional key used by the hashing algorithm . + - Intended to push optional key used by the hashing + algorithm from upper layers into the driver. + - This function can store the key in the transformation + context or can outright program it into the hardware. + In the former case, one must be careful to program + the key into the hardware at appropriate time and one + must be careful that .setkey() can be called multiple + times during the existence of the transformation + object. + - Not all hashing algorithms do implement this function. + -> SHAx/MDx/CRCx do NOT implement this function. + -> HMAC(MDx)/HMAC(SHAx) do implement this function. + - This function must be called before any other of the + init()/update()/final()/finup()/digest() is called. + - No data processing happens at this point. + + .export() ....... Export partial state of the transformation . + - This function dumps the entire state of the ongoing + transformation into a provided block of data so it + can be .import()ed back later on. + - This is useful in case you want to save partial result + of the transformation after processing certain amount + of data and reload this partial result multiple times + later on for multiple re-use. + - No data processing happens at this point. + .import() ....... Import partial state of the transformation . + - This function loads the entire state of the ongoing + transformation from a provided block of data so the + transformation can continue from this point onward. + - No data processing happens at this point. + +Here are schematics of how these functions are called when operated from +other part of the kernel. Note that the .setkey() call might happen before +or after any of these schematics happen, but must not happen during any of +these are in-flight. Please note that calling .init() followed immediatelly +by .finish() is also a perfectly valid transformation. + + I) DATA -----------. + v + .init() -> .update() -> .final() ! .update() might not be called + ^ | | at all in this scenario. + '----' '---> HASH + + II) DATA -----------.-----------. + v v + .init() -> .update() -> .finup() ! .update() may not be called + ^ | | at all in this scenario. + '----' '---> HASH + + III) DATA -----------. + v + .digest() ! The entire process is handled + | by the .digest() call. + '---------------> HASH + +Here is a schematic of how the .export()/.import() functions are called when +used from another part of the kernel. + + KEY--. DATA--. + v v ! .update() may not be called + .setkey() -> .init() -> .update() -> .export() at all in this scenario. + ^ | | + '-----' '--> PARTIAL_HASH + + ----------- other transformations happen here ----------- + + PARTIAL_HASH--. DATA1--. + v v + .import -> .update() -> .final() ! .update() may not be called + ^ | | at all in this scenario. + '----' '--> HASH1 + + PARTIAL_HASH--. DATA2-. + v v + .import -> .finup() + | + '---------------> HASH2 + +The struct hash_alg_common fields and it's mirror in struct shash_alg +..................................................................... + +This structure defines various size constraints and generic properties of +the hashing algorithm that is being implemented. Let us first inspect the +size properties: + + digestsize .... Size of the result of the transformation. + - A buffer of this size must be available to the .final() + and .finup() calls, so they can store the resulting hash + into it. + - For various predefined sizes, search include/crypto/ + using 'git grep _DIGEST_SIZE include/crypto' . + statesize ..... Size of the block for partial state of the transformation. + - A buffer of this size must be passed to the .export() + function as it will save the partial state of the + transformation into it. On the other side, the .import() + function will load the state from a buffer of this size + as well. + + +Specifics of asynchronous HASH transformation +............................................. + +There are a couple of specifics to the [AHASH] interface. + +First of all, some of the drivers will want to use the Generic ScatterWalk +in case the hardware needs to be fed separate chunks of the scatterlist +which contains the input data. The buffer containing the resulting hash will +always be properly aligned to .cra_alignmask so there is no need to worry +about this. Please refer to the section 9.1) of this document of the +description and usage of the Generic ScatterWalk interface. + +It is recommended to enqueue cryptographic transformation requests into +generic crypto queues. This allows for these requests to be processed in +sequence as the cryptographic hardware becomes free. + + +Single block cipher API +======================= + +See source code comments for the *_cipher* calls in include/linux/crypto.h. + + +Synchronous block cipher API +============================ + +See source code comments for the *_blkcipher* calls in include/linux/crypto.h. + + +Asynchronous block cipher API +============================= + +See source code comments for the *_ablkcipher* calls and "ablkcipher_request_* +calls in include/linux/crypto.h. + + +Synchronous message digest API +============================== + +See source code comments for the *_hash* calls in include/linux/crypto.h. + + +Synchronous message digest API with caller-accessible state space +================================================================= + +See source code comments for the *_shash* calls in include/crypto/hash.h. + + +Asynchronous message digest API +=============================== + +See source code comments for the *_ahash* calls and "ahash_request_* +calls in include/crypto/hash.h. + + +Random number generation API +============================ + +See source code comments for the *_rng* calls in include/crypto/hash.h. + + +AEAD asynchronous cipher API +============================ + +See source code comments for the *_aead* calls and "aead_request_* +calls in include/linux/crypto.h. + + +Authors +======= + +Stephan Mueller +Marek Vasut -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/