Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751703AbaKCKJR (ORCPT ); Mon, 3 Nov 2014 05:09:17 -0500 Received: from mail-bn1on0115.outbound.protection.outlook.com ([157.56.110.115]:54780 "EHLO na01-bn1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751012AbaKCKJM convert rfc822-to-8bit (ORCPT ); Mon, 3 Nov 2014 05:09:12 -0500 From: Yao Yuan To: "wsa@the-dreams.de" , "marex@denx.de" CC: "mark.rutland@arm.com" , "linux-kernel@vger.kernel.org" , "linux-i2c@vger.kernel.org" , "fugang.duan@freescale.com" , "shawn.guo@linaro.org" , "linux-arm-kernel@lists.infradead.org" , "LW@KARO-electronics.de" Subject: RE: [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c driver Thread-Topic: [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c driver Thread-Index: AQHP5UJmutB+SZP4EUmRPSL8mRUifZxOxUpw Date: Mon, 3 Nov 2014 09:35:25 +0000 Message-ID: <09b65b43c32b410993a8fcdc3c591b89@BL2PR03MB338.namprd03.prod.outlook.com> References: <1413025032-14958-1-git-send-email-yao.yuan@freescale.com> <1413025032-14958-4-git-send-email-yao.yuan@freescale.com> In-Reply-To: <1413025032-14958-4-git-send-email-yao.yuan@freescale.com> Accept-Language: en-US, zh-CN Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [123.151.195.50] x-microsoft-antispam: BCL:0;PCL:0;RULEID:;SRVR:BL2PR03MB371; x-exchange-antispam-report-test: UriScan:; x-forefront-prvs: 0384275935 x-forefront-antispam-report: SFV:NSPM;SFS:(10019020)(6009001)(51704005)(377454003)(13464003)(189002)(199003)(19580395003)(19580405001)(101416001)(122556002)(50986999)(107046002)(31966008)(105586002)(40100003)(54356999)(76176999)(106356001)(120916001)(106116001)(108616004)(95666004)(99286002)(77156002)(4396001)(15975445006)(21056001)(99396003)(87936001)(33646002)(2656002)(15202345003)(76576001)(97736003)(2501002)(66066001)(46102003)(62966003)(64706001)(20776003)(575784001)(92566001)(86362001)(24736002);DIR:OUT;SFP:1102;SCL:1;SRVR:BL2PR03MB371;H:BL2PR03MB338.namprd03.prod.outlook.com;FPR:;MLV:sfv;PTR:InfoNoRecords;MX:1;A:1;LANG:en; Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 X-OriginatorOrg: freescale.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Wolfram, I have fixed the issues in v9. Could you please help to review this patch? Thanks & Regards Yuan Yao > -----Original Message----- > From: linux-arm-kernel [mailto:linux-arm-kernel- > bounces@lists.infradead.org] On Behalf Of Yuan Yao > Sent: Saturday, October 11, 2014 6:57 PM > To: wsa@the-dreams.de; marex@denx.de > Cc: mark.rutland@arm.com; linux-kernel@vger.kernel.org; linux- > i2c@vger.kernel.org; Duan Fugang-B38611; shawn.guo@linaro.org; linux-arm- > kernel@lists.infradead.org; LW@KARO-electronics.de > Subject: [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c > driver > > Add dma support for i2c. This function depend on DMA driver. > You can turn on it by write both the dmas and dma-name properties in dts > node. > DMA is optional, even DMA request unsuccessfully, i2c can also work well. > > Signed-off-by: Yuan Yao > --- > drivers/i2c/busses/i2c-imx.c | 327 > ++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 325 insertions(+), 2 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c > index 2452b57..e58c771 100644 > --- a/drivers/i2c/busses/i2c-imx.c > +++ b/drivers/i2c/busses/i2c-imx.c > @@ -38,7 +38,11 @@ > > ************************************************************************* > ******/ > > #include > +#include > #include > +#include > +#include > +#include > #include > #include > #include > @@ -49,6 +53,7 @@ > #include > #include > #include > +#include > #include #include > #include @@ -63,6 +68,13 @@ > /* Default value */ > #define IMX_I2C_BIT_RATE 100000 /* 100kHz */ > > +/* > + * Enable DMA if transfer byte size is bigger than this threshold. > + * As the hardware request, it must bigger than 4 bytes. > + */ > +#define IMX_I2C_DMA_THRESHOLD 16 > +#define IMX_I2C_DMA_TIMEOUT 1000 > + > /* IMX I2C registers: > * the I2C register offset is different between SoCs, > * to provid support for all these chips, split the @@ -88,6 +100,7 @@ > #define I2SR_IBB 0x20 > #define I2SR_IAAS 0x40 > #define I2SR_ICF 0x80 > +#define I2CR_DMAEN 0x02 > #define I2CR_RSTA 0x04 > #define I2CR_TXAK 0x08 > #define I2CR_MTX 0x10 > @@ -174,6 +187,17 @@ struct imx_i2c_hwdata { > unsigned i2cr_ien_opcode; > }; > > +struct imx_i2c_dma { > + struct dma_chan *chan_tx; > + struct dma_chan *chan_rx; > + struct dma_chan *chan_using; > + struct completion cmd_complete; > + dma_addr_t dma_buf; > + unsigned int dma_len; > + unsigned int dma_transfer_dir; > + unsigned int dma_data_dir; > +}; > + > struct imx_i2c_struct { > struct i2c_adapter adapter; > struct clk *clk; > @@ -186,6 +210,8 @@ struct imx_i2c_struct { > unsigned int cur_clk; > unsigned int bitrate; > const struct imx_i2c_hwdata *hwdata; > + > + struct imx_i2c_dma *dma; > }; > > static const struct imx_i2c_hwdata imx1_i2c_hwdata = { @@ -256,6 > +282,132 @@ static inline unsigned char imx_i2c_read_reg(struct > imx_i2c_struct *i2c_imx, > return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift)); } > > +/* Functions for DMA support */ > +static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, > + dma_addr_t phy_addr) > +{ > + struct imx_i2c_dma *dma; > + struct dma_slave_config dma_sconfig; > + struct device *dev = &i2c_imx->adapter.dev; > + int ret; > + > + dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); > + if (!dma) > + return -ENOMEM; > + > + dma->chan_tx = dma_request_slave_channel(dev, "tx"); > + if (!dma->chan_tx) { > + dev_dbg(dev, "can't request DMA tx channel\n"); > + ret = -ENODEV; > + goto fail_al; > + } > + > + dma_sconfig.dst_addr = phy_addr + > + (IMX_I2C_I2DR << i2c_imx->hwdata->regshift); > + dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; > + dma_sconfig.dst_maxburst = 1; > + dma_sconfig.direction = DMA_MEM_TO_DEV; > + ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig); > + if (ret < 0) { > + dev_dbg(dev, "can't configure tx channel\n"); > + goto fail_tx; > + } > + > + dma->chan_rx = dma_request_slave_channel(dev, "rx"); > + if (!dma->chan_rx) { > + dev_dbg(dev, "can't request DMA rx channel\n"); > + ret = -ENODEV; > + goto fail_tx; > + } > + > + dma_sconfig.src_addr = phy_addr + > + (IMX_I2C_I2DR << i2c_imx->hwdata->regshift); > + dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; > + dma_sconfig.src_maxburst = 1; > + dma_sconfig.direction = DMA_DEV_TO_MEM; > + ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig); > + if (ret < 0) { > + dev_dbg(dev, "can't configure rx channel\n"); > + goto fail_rx; > + } > + > + i2c_imx->dma = dma; > + init_completion(&dma->cmd_complete); > + dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n", > + dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx)); > + > + return 0; > + > +fail_rx: > + dma_release_channel(dma->chan_rx); > +fail_tx: > + dma_release_channel(dma->chan_tx); > +fail_al: > + devm_kfree(dev, dma); > + dev_info(dev, "can't use DMA\n"); > + > + return ret; > +} > + > +static void i2c_imx_dma_callback(void *arg) { > + struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg; > + struct imx_i2c_dma *dma = i2c_imx->dma; > + > + dma_unmap_single(dma->chan_using->device->dev, dma->dma_buf, > + dma->dma_len, dma->dma_data_dir); > + complete(&dma->cmd_complete); > +} > + > +static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx, > + struct i2c_msg *msgs) > +{ > + struct imx_i2c_dma *dma = i2c_imx->dma; > + struct dma_async_tx_descriptor *txdesc; > + struct device *dev = &i2c_imx->adapter.dev; > + struct device *chan_dev = dma->chan_using->device->dev; > + > + dma->dma_buf = dma_map_single(chan_dev, msgs->buf, > + dma->dma_len, dma->dma_data_dir); > + if (dma_mapping_error(chan_dev, dma->dma_buf)) { > + dev_err(dev, "DMA mapping failed\n"); > + return -EINVAL; > + } > + > + txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf, > + dma->dma_len, dma->dma_transfer_dir, > + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); > + if (!txdesc) { > + dev_err(dev, "Not able to get desc for DMA xfer\n"); > + dma_unmap_single(chan_dev, dma->dma_buf, > + dma->dma_len, dma->dma_data_dir); > + return -EINVAL; > + } > + > + txdesc->callback = i2c_imx_dma_callback; > + txdesc->callback_param = i2c_imx; > + dmaengine_submit(txdesc); > + dma_async_issue_pending(dma->chan_using); > + > + return 0; > +} > + > +static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) { > + struct imx_i2c_dma *dma = i2c_imx->dma; > + > + dma->dma_buf = 0; > + dma->dma_len = 0; > + > + dma_release_channel(dma->chan_tx); > + dma->chan_tx = NULL; > + > + dma_release_channel(dma->chan_rx); > + dma->chan_rx = NULL; > + > + dma->chan_using = NULL; > +} > + > /** Functions for IMX I2C adapter driver > *************************************** > > ************************************************************************* > ******/ > > @@ -387,6 +539,7 @@ static int i2c_imx_start(struct imx_i2c_struct > *i2c_imx) > i2c_imx->stopped = 0; > > temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK; > + temp &= ~I2CR_DMAEN; > imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); > return result; > } > @@ -400,6 +553,8 @@ static void i2c_imx_stop(struct imx_i2c_struct > *i2c_imx) > dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); > temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); > temp &= ~(I2CR_MSTA | I2CR_MTX); > + if (i2c_imx->dma) > + temp &= ~I2CR_DMAEN; > imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); > } > if (is_imx1_i2c(i2c_imx)) { > @@ -440,6 +595,159 @@ static irqreturn_t i2c_imx_isr(int irq, void > *dev_id) > return IRQ_NONE; > } > > +static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx, > + struct i2c_msg *msgs) > +{ > + int result; > + unsigned int temp = 0; > + unsigned long orig_jiffies = jiffies; > + struct imx_i2c_dma *dma = i2c_imx->dma; > + struct device *dev = &i2c_imx->adapter.dev; > + > + dma->chan_using = dma->chan_tx; > + dma->dma_transfer_dir = DMA_MEM_TO_DEV; > + dma->dma_data_dir = DMA_TO_DEVICE; > + dma->dma_len = msgs->len - 1; > + result = i2c_imx_dma_xfer(i2c_imx, msgs); > + if (result) > + return result; > + > + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); > + temp |= I2CR_DMAEN; > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); > + > + /* > + * Write slave address. > + * The first byte must be transmitted by the CPU. > + */ > + imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR); > + reinit_completion(&i2c_imx->dma->cmd_complete); > + result = wait_for_completion_interruptible_timeout( > + &i2c_imx->dma->cmd_complete, > + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT)); > + if (result <= 0) { > + dmaengine_terminate_all(dma->chan_using); > + return result ?: -ETIMEDOUT; > + } > + > + /* Waiting for transfer complete. */ > + while (1) { > + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR); > + if (temp & I2SR_ICF) > + break; > + if (time_after(jiffies, orig_jiffies + > + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT))) { > + dev_dbg(dev, "<%s> Timeout\n", __func__); > + return -ETIMEDOUT; > + } > + schedule(); > + } > + > + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); > + temp &= ~I2CR_DMAEN; > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); > + > + /* The last data byte must be transferred by the CPU. */ > + imx_i2c_write_reg(msgs->buf[msgs->len-1], > + i2c_imx, IMX_I2C_I2DR); > + result = i2c_imx_trx_complete(i2c_imx); > + if (result) > + return result; > + > + result = i2c_imx_acked(i2c_imx); > + if (result) > + return result; > + > + return 0; > +} > + > +static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, > + struct i2c_msg *msgs, bool is_lastmsg) { > + int result; > + unsigned int temp; > + unsigned long orig_jiffies; > + struct imx_i2c_dma *dma = i2c_imx->dma; > + struct device *dev = &i2c_imx->adapter.dev; > + > + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); > + temp |= I2CR_DMAEN; > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); > + > + dma->chan_using = dma->chan_rx; > + dma->dma_transfer_dir = DMA_DEV_TO_MEM; > + dma->dma_data_dir = DMA_FROM_DEVICE; > + /* The last two data bytes must be transferred by the CPU. */ > + dma->dma_len = msgs->len - 2; > + result = i2c_imx_dma_xfer(i2c_imx, msgs); > + if (result) > + return result; > + > + reinit_completion(&i2c_imx->dma->cmd_complete); > + result = wait_for_completion_interruptible_timeout( > + &i2c_imx->dma->cmd_complete, > + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT)); > + if (result <= 0) { > + dmaengine_terminate_all(dma->chan_using); > + return result ?: -ETIMEDOUT; > + } > + > + /* waiting for transfer complete. */ > + while (1) { > + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR); > + if (temp & I2SR_ICF) > + break; > + if (time_after(jiffies, orig_jiffies + > + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT))) { > + dev_dbg(dev, "<%s> Timeout\n", __func__); > + return -ETIMEDOUT; > + } > + schedule(); > + } > + > + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); > + temp &= ~I2CR_DMAEN; > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); > + > + /* read n-1 byte data */ > + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); > + temp |= I2CR_TXAK; > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); > + > + msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); > + /* read n byte data */ > + result = i2c_imx_trx_complete(i2c_imx); > + if (result) > + return result; > + > + if (is_lastmsg) { > + /* > + * It must generate STOP before read I2DR to prevent > + * controller from generating another clock cycle > + */ > + dev_dbg(dev, "<%s> clear MSTA\n", __func__); > + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); > + temp &= ~(I2CR_MSTA | I2CR_MTX); > + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); > + i2c_imx_bus_busy(i2c_imx, 0); > + i2c_imx->stopped = 1; > + } else { > + /* > + * For i2c master receiver repeat restart operation like: > + * read -> repeat MSTA -> read/write > + * The controller must set MTX before read the last byte in > + * the first read operation, otherwise the first read cost > + * one extra clock cycle. > + */ > + temp = readb(i2c_imx->base + IMX_I2C_I2CR); > + temp |= I2CR_MTX; > + writeb(temp, i2c_imx->base + IMX_I2C_I2CR); > + } > + msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); > + > + return 0; > +} > + > static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg > *msgs) { > int i, result; > @@ -509,6 +817,9 @@ static int i2c_imx_read(struct imx_i2c_struct > *i2c_imx, struct i2c_msg *msgs, bo > > dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__); > > + if (i2c_imx->dma && msgs->len >= IMX_I2C_DMA_THRESHOLD > && !block_data) > + return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg); > + > /* read data */ > for (i = 0; i < msgs->len; i++) { > u8 len = 0; > @@ -623,8 +934,12 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, > #endif > if (msgs[i].flags & I2C_M_RD) > result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg); > - else > - result = i2c_imx_write(i2c_imx, &msgs[i]); > + else { > + if (i2c_imx->dma && msgs[i].len >= > IMX_I2C_DMA_THRESHOLD) > + result = i2c_imx_dma_write(i2c_imx, &msgs[i]); > + else > + result = i2c_imx_write(i2c_imx, &msgs[i]); > + } > if (result) > goto fail0; > } > @@ -659,6 +974,7 @@ static int i2c_imx_probe(struct platform_device *pdev) > struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev); > void __iomem *base; > int irq, ret; > + dma_addr_t phy_addr; > > dev_dbg(&pdev->dev, "<%s>\n", __func__); > > @@ -673,6 +989,7 @@ static int i2c_imx_probe(struct platform_device *pdev) > if (IS_ERR(base)) > return PTR_ERR(base); > > + phy_addr = (dma_addr_t)res->start; > i2c_imx = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_struct), > GFP_KERNEL); > if (!i2c_imx) > @@ -748,6 +1065,9 @@ static int i2c_imx_probe(struct platform_device > *pdev) > i2c_imx->adapter.name); > dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); > > + /* Init DMA config if support*/ > + i2c_imx_dma_request(i2c_imx, phy_addr); > + > return 0; /* Return OK */ > > clk_disable: > @@ -763,6 +1083,9 @@ static int i2c_imx_remove(struct platform_device > *pdev) > dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n"); > i2c_del_adapter(&i2c_imx->adapter); > > + if (i2c_imx->dma) > + i2c_imx_dma_free(i2c_imx); > + > /* setup chip registers to defaults */ > imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR); > imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR); > -- > 2.1.0.27.g96db324 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/