Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752247AbaKCNer (ORCPT ); Mon, 3 Nov 2014 08:34:47 -0500 Received: from tex.lwn.net ([70.33.254.29]:37581 "EHLO vena.lwn.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751390AbaKCNen (ORCPT ); Mon, 3 Nov 2014 08:34:43 -0500 Date: Mon, 3 Nov 2014 08:34:39 -0500 From: Jonathan Corbet To: Stephan Mueller Cc: Herbert Xu , "David S. Miller" , Marek Vasut , Jason Cooper , Grant Likely , Geert Uytterhoeven , Linux Kernel Developers List , linux-crypto@vger.kernel.org Subject: Re: [PATCH v2 01/11] crypto: Documentation - crypto API high level spec Message-ID: <20141103083439.635f5cb6@lwn.net> In-Reply-To: <4163724.RCMDlx8dmE@tachyon.chronox.de> References: <6375771.bx7QqLJLuR@tachyon.chronox.de> <4163724.RCMDlx8dmE@tachyon.chronox.de> Organization: LWN.net X-Mailer: Claws Mail 3.10.1 (GTK+ 2.24.24; x86_64-redhat-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sun, 02 Nov 2014 21:35:11 +0100 Stephan Mueller wrote: > The design of the kernel crypto API as well as hints to program with > the kernel crypto API are given. Cool to see this, thanks. Please forgive me if I go into full grumpy editor mode here. There's a lot of good information here, but I think it could be made better with a bit of effort... > diff --git a/Documentation/crypto/crypto-API-spec.txt b/Documentation/crypto/crypto-API-spec.txt > new file mode 100644 > index 0000000..8a24c98 > --- /dev/null > +++ b/Documentation/crypto/crypto-API-spec.txt > @@ -0,0 +1,721 @@ > +Kernel Crypto API Interface Specification > +========================================= > + > +The kernel crypto API offers a rich set of cryptographic ciphers as well as > +other data transformation mechanisms and methods to invoke these. This document > +contains a description of the API and provides example code. > + > +To understand and properly use the kernel crypto API a brief explanation of its > +structure is given. Based on the architecture, the API can be separated into > +different components. Following the architecture specification, hints to > +developers of ciphers are provided. Pointers to the API function call > +documentation are given at the end. > + > +The kernel crypto API refers to all algorithms as "transformation". Therefore, a transformation*s* > +cipher handle variable usually has the name "tfm". Besides cryptographic > +operations, the kernel crypto API also knows compression transforms and handles > +them the same way as ciphers. Should that be s/transforms/transformations/ to keep the terminology consistent? > +The kernel crypto API serves the following entity types: > + > + * consumers requesting cryptographic services > + > + * data transformation implementations (typically ciphers) that > + can be called by consumers using the kernel crypto API > + > +This specification is intended for consumers of the kernel crypto API as well > +as for developers implementing ciphers. This API specification, however, does > +not discusses all API calls available to data transformation implementations > +((i.e. implementations of ciphers and other transformations (such as CRC or > +even compression algorithms) that can register with the kernel crypto API). > + > +Note: The terms "transformation" and cipher algorithm are used interchangably. > + > + > +Terminology > +----------- > + > +The transformation implementation is an actual code or interface to hardware > +which implements a certain transformation with precisely defined behavior. > + > +The transformation object (TFM) is an instance of a transformation > +implementation. There can be multiple transformation objects associated with > +a single transformation implementation. Each of those transformation objects > +is held by a crypto API consumer or another transformation. Transformation > +object is allocated when a crypto API consumer requests a transformation > +implementation. The consumer is then provided with a structure, which contains > +a transformation object (TFM). It seems like it would be good to show what this object is and how to allocate it here, rather than just teasing the reader saying it's possible? > +The transformation context is private data associated with the transformation > +object. > + > + > +Kernel Crypto API Architecture > +============================== > + > +Cipher algorithm types > +---------------------- > + > +The kernel crypto API provides different API calls for the following cipher > +types: > + > + * Symmetric ciphers > + > + * AEAD ciphers > + > + * Message digest, including keyed message digest > + > + * Random number generation > + > + * User space interface > + > + > +Ciphers and Templates > +--------------------- > + > +The kernel crypto API provides implementations of single block ciphers and > +message digests. In addition, the kernel crypto API provides numerous > +"templates" that can be used in conjunction with the single block ciphers and > +message digests. Templates include all types of block chaining mode, the HMAC > +mechanism, etc. > + > +Single block ciphers and message digests can either be directly used by a > +caller or invoked together with a template to form multi-block ciphers or keyed > +message digests. > + > +A single block cipher may even be called with multiple templates. However, > +templates cannot be used without a single cipher. > + > + > +Synchronous and asynchronous operation > +-------------------------------------- > + > +The kernel crypto API provides synchronous and asynchronous API operations. > + > +When using the synchronous API operation, the caller invokes a cipher operation > +which is performed synchronously by the kernel crypto API. That means, the > +caller waits until the cipher operation completes. Therefore, the kernel crypto > +API calls work like regular function calls. For synchronous operation, the set > +of API calls is small and conceptually similar to any other crypto library. > + > +Asynchronous operation is provided by the kernel crypto API which implies that > +the invocation of a cipher operation will complete almost instantly. That > +invocation triggers the cipher operation but it does not signal its completion. > +Before invoking a cipher operation, the caller must provide a callback function > +the kernel crypto API can invoke to signal the completion of the cipher > +operation. Furthermore, the caller must ensure it can handle such asynchronous > +events by applying appropriate locking around its data. The kernel crypto API > +does not perform any special serialization operation to protect the caller's > +data integrity. > + > + > +Kernel crypto API cipher references and priority > +------------------------------------------------ > + > +A cipher is referenced by the caller with a string. That string has the > +following semantics: > + > + template(single block cipher) > + > +where "template" and "single block cipher" is the aforementioned template and > +single block cipher, respectively. If applicable, additional templates may > +enclose other templates, such as > + > + template1(template2(single block cipher))) I suspect a lot of readers may reach the glaze-over point around here. The discussion is useful but all very abstract and hard to tie to the actual crypto code. A real-world example here would help. > +The kernel crypto API may provide multiple implementations of a template or a > +single block cipher. For example, AES on newer Intel hardware has the following > +implementations: AES-NI, assembler implementation, or straight C. Now, when > +using the string "aes" with the kernel crypto API, which cipher implementation > +is used? The answer to that question is the priority number assigned to each > +cipher implementation by the kernel crypto API. When a caller uses the string to > +refer to a cipher during initialization of a cipher handle, the kernel crypto > +API looks up all implementations providing an implementation with that name and > +selects the implementation with the highest priority. This seems like detail stuff that should go with the actual API description? > +Now, a caller may have the need to refer to a specific cipher implementation and > +thus does not want to rely on the priority-based selection. To accommodate this > +scenario, the kernel crypto API allows the cipher implementation to register a > +unique name in addition to common names. When using that unique name, a caller > +is therefore always sure to refer to the intended cipher implementation. > + > +The list of available ciphers is given in /proc/crypto. When reading that file, > +all available ciphers are listed. However, that list does not specify all Those two sentences repeat each other. Anyway, that's available ciphers in a running kernel, presumably, and not everything that could be build into a kernel. A useful distinction to make. > +possible permutations of templates and ciphers. Each block listed in > +/proc/crypto contains the following information: > + > + * name: the generic name of the cipher that is subject to the > + priority-based selection -- this name can be used by the cipher > + allocation API calls So, it's not just a name, it's a qualified name - "ctr(aes)" rather than just "aes". How is the reader to interpret that extra information? > + * driver: the unique name of the cipher -- this name can be used by the > + cipher allocation API calls > + > + * module: the kernel module providing the cipher implementation (or > + "kernel" for statically linked ciphers) > + > + * priority: the priority value of the cipher implementation > + > + * refcnt: the reference count of the respective cipher (i.e. the number > + of current consumers of this cipher) > + > + * selftest: specification whether the self test for the cipher passed > + > + * type: > + - blkcipher for symmetric block ciphers > + - ablkcipher for asymmetric block ciphers > + - cipher for single block ciphers that may be used with an > + additional template > + - shash for symmetric message digest > + - ahash for asymmetric message digest > + - aead for AEAD cipher type > + - compression for compression type transforms > + - rng for random number generator > + - givcipher for cipher with associated IV generator > + > + * blocksize: blocksize of cipher in bytes > + > + * keysize: key size in bytes > + > + * ivsize: IV size in bytes > + > + * seedsize: required size of seed data for random number generator > + > + * digestsize: output size of the message digest Worth saying that some of these fields won't be present if they are not relevant? > + * geniv: IV generation type: > + - eseqiv for encrypted sequence number based IV generation > + - seqiv for sequence number based IV generation > + - chainiv for chain iv generation > + - is a marker that the cipher implements IV generation > + and handling as it is specific to the given cipher > + > + > +Key sizes > +--------- > + > +When allocating a cipher handle, the caller only specifies the cipher type. > +Symmetric ciphers, however, typically support multiple key sizes (e.g. AES-128 > +vs. AES-192 vs. AES-256). These key sizes are determined with the length of the > +provided key. Thus, the kernel crypto API does not provide a separate way to > +select the particular symmetric cipher key size. > + > + > +Cipher allocation type and masks > +-------------------------------- > + > +The different cipher handle allocation functions allow the specification of a > +type and mask flag. Both parameters have the following meaning (and are > +therefore not covered in the subsequent sections). > + > +The type flag specifies the type of the cipher algorithm. The caller usually > +provides a 0 when the caller wants the default handling. Otherwise, the caller > +may provide the following selections which match the the aforementioned cipher > +types: > + > + * CRYPTO_ALG_TYPE_CIPHER Raw block cipher > + * CRYPTO_ALG_TYPE_COMPRESS Compression > + * CRYPTO_ALG_TYPE_AEAD Authenticated Encryption with Associated Data (MAC) > + * CRYPTO_ALG_TYPE_BLKCIPHER Synchronous multi-block cipher > + * CRYPTO_ALG_TYPE_ABLKCIPHER Asynchronous multi-block cipher > + * CRYPTO_ALG_TYPE_GIVCIPHER What's this one? > + * CRYPTO_ALG_TYPE_DIGEST Raw message digest > + * CRYPTO_ALG_TYPE_HASH Alias for CRYPTO_ALG_TYPE_DIGEST > + * CRYPTO_ALG_TYPE_SHASH Synchronous multi-block hash > + * CRYPTO_ALG_TYPE_AHASH Asynchronous multi-block hash > + * CRYPTO_ALG_TYPE_RNG Random Number Generation > + * CRYPTO_ALG_TYPE_PCOMPRESS What's that last one? > +The mask flag restricts the type of cipher. The only allowed flag is > +CRYPTO_ALG_ASYNC to restrict the cipher lookup function to asynchronous ciphers. > +Usually, a caller provides a 0 for the mask flag. > + > +When the caller provides a mask and type specification, the caller limits the > +kernel crypto API´s search for a suitable cipher implementation for the given > +cipher name. That means, even when a caller uses a cipher name that exists > +during its initialization call, the kernel crypto API may not select it due > +to the used type and mask field. > + > + > +Developing Cipher Algorithms > +============================ > + > +Registering and unregistering transformation > +--------------------------------------------- > + > +There are three distinct types of registration functions in the Crypto API. > +One is used to register a generic cryptographic transformation, while the > +other two are specific to HASH transformations and COMPRESSion. We will > +discuss the latter two in a separate chapter, here we will only look at > +the generic ones. > + > +The generic registration functions can be found in include/linux/crypto.h > +and their definition can be seen below. The former function registers a > +single transformation, while the latter works on an array of transformation > +descriptions. The latter is useful when registering transformations in bulk. > + > + int crypto_register_alg(struct crypto_alg *alg); > + int crypto_register_algs(struct crypto_alg *algs, int count); > + > +The counterparts to those functions are listed below. > + > + int crypto_unregister_alg(struct crypto_alg *alg); > + int crypto_unregister_algs(struct crypto_alg *algs, int count); > + This would be a good place to talk about struct crypto_alg? > +Notice that both registration and unregistration functions do return a value, > +so make sure to handle errors. What is the form of the error return? > +The bulk registration / unregistration functions require that struct crypto_alg > +is an array of count size. These functions simply loop over that array and > +register / unregister each individual algorithm. If an error occurs, the > +loop is terminated at the offending algorithm definition. That means, the > +algorithms prior to the offending algorithm are successfully registered. What is the return value in the error case? How does the caller determine which one failed? > +Single-block ciphers [CIPHER] > +----------------------------- > +Example of transformations: aes, arc4, ... > + > +This section describes the simplest of all transformation implementations, > +that being the CIPHER type. The CIPHER type is used for transformations > +which operate on exactly one block at a time and there are no dependencies > +between blocks at all. > + > +Registration specifics > +...................... > + > +The registration of [CIPHER] algorithm is specific in that struct crypto_alg > +field .cra_type is empty. The .cra_u.cipher has to be filled in with proper > +callbacks to implement this transformation. You haven't really introduced this structure, though, so the reader doesn't really know what fields exist and which should be worried about. > +Fields in struct cipher_alg explained > +..................................... And struct cipher_alg is totally new and could use some introduction. Where is it used? > +This section explains the .cra_u.cipher fields and how they are called. > +All of the fields are mandatory and must be filled: > + > + .cia_min_keysize ... Minimum key size supported by the transformation. > + - This is the smallest key length supported by this > + transformation algorithm. This must be set to one > + of the pre-defined values as this is not hardware > + specific. > + - Possible values for this field can be found via: > + $ git grep "_MIN_KEY_SIZE" include/crypto/ > + .cia_max_keysize ... Maximum key size supported by the transformation. > + - This is the largest key length supported by this > + transformation algorithm. This must be set to one > + of the pre-defined values as this is not hardware > + specific. > + - Possible values for this field can be found via: > + $ git grep "_MAX_KEY_SIZE" include/crypto/ > + .cia_setkey() ...... Set key for the transformation. > + - This function is used to either program a supplied > + key into the hardware or store the key in the > + transformation context for programming it later. Note > + that this function does modify the transformation > + context. > + - This function can be called multiple times during > + the existence of the transformation object, so one > + must make sure the key is properly reprogrammed > + into the hardware. > + - This function is also responsible for checking the > + key length for validity. > + - In case a software fallback was put in place in > + the .cra_init() call, this function might need to > + use the fallback if the algorithm doesn't support > + all of the key sizes. What's this software fallback and cra_init() of which you speak? Most readers will have no clue of what you're talking about here. > + .cia_encrypt() ..... Encrypt a single block. > + - This function is used to encrypt a single block of > + data, which must be .cra_blocksize big. This always > + operates on a full .cra_blocksize and it is not > + possible to encrypt a block of smaller size. The > + supplied buffers must therefore also be at least > + of .cra_blocksize size. This is about where I realize life might be better if you gave full function prototypes. Where is cra_blocksize specified? > + - Both the input and output buffers are always aligned > + to .cra_alignmask . In case either of the input or > + output buffer supplied by user of the crypto API is > + not aligned to .cra_alignmask, the crypto API will > + re-align the buffers. The re-alignment means that a > + new buffer will be allocated, the data will be copied > + into the new buffer, then the processing will happen > + on the new buffer, then the data will be copied back > + into the original buffer and finally the new buffer > + will be freed. > + - In case a software fallback was put in place in > + the .cra_init() call, this function might need to > + use the fallback if the algorithm doesn't support > + all of the key sizes. > + - In case the key was stored in transformation context, > + the key might need to be re-programmed into the > + hardware in this function. > + - This function shall not modify the transformation > + context, as this function may be called in parallel > + with the same transformation object. > + .cia_decrypt() ..... Decrypt a single block. > + - This is a reverse counterpart to .cia_encrypt(), and > + the conditions are exactly the same. > + > +Here are schematics of how these functions are called when operated from > +other part of the kernel. Note that the .cia_setkey() call might happen > +before or after any of these schematics happen, but must not happen during > +any of these are in-flight. > + > + KEY ---. PLAINTEXT ---. > + v v > + .cia_setkey() -> .cia_encrypt() > + | > + '-----> CIPHERTEXT > + > +Please note that a pattern where .cia_setkey() is called multiple times > +is also valid: > + > + KEY1 --. PLAINTEXT1 --. KEY2 --. PLAINTEXT2 --. > + v v v v > + .cia_setkey() -> .cia_encrypt() -> .cia_setkey() -> .cia_encrypt() > + | | > + '---> CIPHERTEXT1 '---> CIPHERTEXT2 > + > + > +Multi-block ciphers [BLKCIPHER] [ABLKCIPHER] > +-------------------------------------------- > + > +Example of transformations: cbc(aes), ecb(arc4), ... > + > +This section describes the multi-block cipher transformation implementations > +for both synchronous [BLKCIPHER] and asynchronous [ABLKCIPHER] case. The > +multi-block ciphers are used for transformations which operate on scatterlists > +of data supplied to the transformation functions. They output the result into > +a scatterlist of data as well. > + > +Registration specifics > +...................... > + > +The registration of [BLKCIPHER] or [ABLKCIPHER] algorithms is one of the most > +standard procedures throughout the crypto API. There are no specifics for > +this case other that re-aligning of input and output buffers does not happen > +automatically within the crypto API, but is the responsibility of the crypto > +API consumer. The crypto API consumer shall use crypto_blkcipher_alignmask() But just above you said that the crypto subsystem would copy data to align it if need be? > +or crypto_ablkcipher_alignmask() respectively to determine the needs of the > +transformation object and prepare the scatterlist with data accordingly. > + > +Fields in struct blkcipher_alg and struct ablkcipher_alg explained > +.................................................................. Where are these structs used? > +This section explains the .cra_u.blkcipher and .cra_u.cra_ablkcipher fields > +and how they are called. Please note that this is very similar to the basic > +CIPHER case for all but minor details. All of the fields but .geniv are > +mandatory and must be filled: > + > + .min_keysize ... Minimum key size supported by the transformation. > + - This is the smallest key length supported by this > + transformation algorithm. This must be set to one > + of the pre-defined values as this is not hardware > + specific. > + - Possible values for this field can be found via: > + $ git grep "_MIN_KEY_SIZE" include/crypto/ > + .max_keysize ... Maximum key size supported by the transformation. > + - This is the largest key length supported by this > + transformation algorithm. This must be set to one > + of the pre-defined values as this is not hardware > + specific. > + - Possible values for this field can be found via: > + $ git grep "_MAX_KEY_SIZE" include/crypto/ > + .setkey() ...... Set key for the transformation. > + - This function is used to either program a supplied > + key into the hardware or store the key in the > + transformation context for programming it later. Note > + that this function does modify the transformation > + context. > + - This function can be called multiple times during > + the existence of the transformation object, so one > + must make sure the key is properly reprogrammed > + into the hardware. > + - This function is also responsible for checking the > + key length for validity. > + - In case a software fallback was put in place in > + the .cra_init() call, this function might need to > + use the fallback if the algorithm doesn't support > + all of the key sizes. > + .encrypt() ..... Encrypt a scatterlist of blocks. > + - This function is used to encrypt the supplied > + scatterlist containing the blocks of data. The crypto > + API consumer is responsible for aligning the entries > + of the scatterlist properly and making sure the > + chunks are correctly sized. > + - In case a software fallback was put in place in > + the .cra_init() call, this function might need to > + use the fallback if the algorithm doesn't support > + all of the key sizes. > + - In case the key was stored in transformation context, > + the key might need to be re-programmed into the > + hardware in this function. > + - This function shall not modify the transformation > + context, as this function may be called in parallel > + with the same transformation object. > + .decrypt() ..... Decrypt a single block. > + - This is a reverse counterpart to .encrypt(), and the > + conditions are exactly the same. > + > +Please refer to the single block cipher description for schematics of the block > +cipher usage. The usage patterns are exactly the same for [ABLKCIPHER] and > +[BLKCIPHER] as they are for plain [CIPHER]. > + > +Specifics of asynchronous multi-block cipher > +............................................ > + > +There are a couple of specifics to the [ABLKCIPHER] interface. > + > +First of all, some of the drivers will want to use the Generic ScatterWalk > +in case the hardware needs to be fed separate chunks of the scatterlist > +which contains the plaintext and will contain the ciphertext. Please refer > +below for a description and usage of the Generic ScatterWalk interface. > + > +It is recommended to enqueue cryptographic transformation requests into > +generic crypto queues. This allows for these requests to be processed in > +sequence as the cryptographic hardware becomes free. What's a generic crypto queue? That's a new concept. > +Hashing [HASH] > +-------------- > + > +Example of transformations: crc32, md5, sha1, sha256,... > + > +Registering and unregistering the transformation > +................................................ > + > +There are multiple ways to register a HASH transformation, depending on > +whether the transformation is synchronous [SHASH] or asynchronous [AHASH] > +and the amount of HASH transformations we are registering. You can find s/amount/number/ > +the prototypes defined in include/crypto/internal/hash.h : > + > + int crypto_register_ahash(struct ahash_alg *alg); > + > + int crypto_register_shash(struct shash_alg *alg); > + int crypto_register_shashes(struct shash_alg *algs, int count); Yay, full prototypes. But can we introduce that structure too? I guess you sort-of do that below. > +The respective counterparts for unregistering the HASH transformation are > +as follows: > + > + int crypto_unregister_ahash(struct ahash_alg *alg); > + > + int crypto_unregister_shash(struct shash_alg *alg); > + int crypto_unregister_shashes(struct shash_alg *algs, int count); > + > +Common fields of struct shash_alg and ahash_alg explained > +......................................................... > + > +For definition of these structures, please refer to include/crypto/hash.h . > +We will now explain the meaning of each field: > + > + .init() ......... Initialize the transformation context. > + - Intended only to initialize the state of the HASH > + transformation at the begining. This shall fill in > + the internal structures used during the entire duration > + of the whole transformation. > + - No data processing happens at this point. > + .update() ....... Push chunk of data into the driver for transformation. Push *a* chunk... > + - This function actually pushes blocks of data from upper > + layers into the driver, which then passes those to the > + hardware as seen fit. > + - This function must not finalize the HASH transformation, What does "finalize" mean in this context? > + this only adds more data into the transformation. > + - This function shall not modify the transformation > + context, as this function may be called in parallel > + with the same transformation object. > + - Data processing can happen synchronously [SHASH] or > + asynchronously [AHASH] at this point. > + .final() ....... Retrieve result from the driver. > + - This function finalizes the transformation and retrieves > + the resulting hash from the driver and pushes it back to > + upper layers. > + - No data processing happens at this point. > + .finup() ........ Combination of update()+final() . > + - This function is effectively a combination of update() > + and final() calls issued in sequence. > + - As some hardware cannot do update() and final() > + separately, this callback was added to allow such > + hardware to be used at least by IPsec. > + - Data processing can happen synchronously [SHASH] or > + asynchronously [AHASH] at this point. > + .digest() ....... Combination of init()+update()+final() . > + - This function effectively behaves as the entire chain > + of operations, init(), update() and final() issued in > + sequence. > + - Just like .finup(), this was added for hardware which > + cannot do even the .finup(), but can only do the whole > + transformation in one run. > + - Data processing can happen synchronously [SHASH] or > + asynchronously [AHASH] at this point. Are functions like these mandatory, or will the crypto core call the sequence separately if need be? > + .setkey() ....... Set optional key used by the hashing algorithm . > + - Intended to push optional key used by the hashing > + algorithm from upper layers into the driver. > + - This function can store the key in the transformation > + context or can outright program it into the hardware. > + In the former case, one must be careful to program > + the key into the hardware at appropriate time and one > + must be careful that .setkey() can be called multiple > + times during the existence of the transformation > + object. > + - Not all hashing algorithms do implement this function. > + -> SHAx/MDx/CRCx do NOT implement this function. > + -> HMAC(MDx)/HMAC(SHAx) do implement this function. > + - This function must be called before any other of the > + init()/update()/final()/finup()/digest() is called. > + - No data processing happens at this point. > + > + .export() ....... Export partial state of the transformation . > + - This function dumps the entire state of the ongoing > + transformation into a provided block of data so it > + can be .import()ed back later on. > + - This is useful in case you want to save partial result > + of the transformation after processing certain amount > + of data and reload this partial result multiple times > + later on for multiple re-use. > + - No data processing happens at this point. > + .import() ....... Import partial state of the transformation . > + - This function loads the entire state of the ongoing > + transformation from a provided block of data so the > + transformation can continue from this point onward. > + - No data processing happens at this point. > + > +Here are schematics of how these functions are called when operated from > +other part of the kernel. Note that the .setkey() call might happen before > +or after any of these schematics happen, but must not happen during any of > +these are in-flight. Please note that calling .init() followed immediatelly > +by .finish() is also a perfectly valid transformation. > + > + I) DATA -----------. > + v > + .init() -> .update() -> .final() ! .update() might not be called > + ^ | | at all in this scenario. > + '----' '---> HASH > + > + II) DATA -----------.-----------. > + v v > + .init() -> .update() -> .finup() ! .update() may not be called > + ^ | | at all in this scenario. > + '----' '---> HASH > + > + III) DATA -----------. > + v > + .digest() ! The entire process is handled > + | by the .digest() call. > + '---------------> HASH > + > +Here is a schematic of how the .export()/.import() functions are called when > +used from another part of the kernel. > + > + KEY--. DATA--. > + v v ! .update() may not be called > + .setkey() -> .init() -> .update() -> .export() at all in this scenario. > + ^ | | > + '-----' '--> PARTIAL_HASH > + > + ----------- other transformations happen here ----------- > + > + PARTIAL_HASH--. DATA1--. > + v v > + .import -> .update() -> .final() ! .update() may not be called > + ^ | | at all in this scenario. > + '----' '--> HASH1 > + > + PARTIAL_HASH--. DATA2-. > + v v > + .import -> .finup() > + | > + '---------------> HASH2 > + > +The struct hash_alg_common fields and it's mirror in struct shash_alg > +..................................................................... > + > +This structure defines various size constraints and generic properties of > +the hashing algorithm that is being implemented. Let us first inspect the > +size properties: Where is this structure used? > + digestsize .... Size of the result of the transformation. > + - A buffer of this size must be available to the .final() > + and .finup() calls, so they can store the resulting hash > + into it. > + - For various predefined sizes, search include/crypto/ > + using 'git grep _DIGEST_SIZE include/crypto' . > + statesize ..... Size of the block for partial state of the transformation. > + - A buffer of this size must be passed to the .export() > + function as it will save the partial state of the > + transformation into it. On the other side, the .import() > + function will load the state from a buffer of this size > + as well. > + > + > +Specifics of asynchronous HASH transformation > +............................................. > + > +There are a couple of specifics to the [AHASH] interface. > + > +First of all, some of the drivers will want to use the Generic ScatterWalk > +in case the hardware needs to be fed separate chunks of the scatterlist > +which contains the input data. The buffer containing the resulting hash will > +always be properly aligned to .cra_alignmask so there is no need to worry > +about this. Please refer to the section 9.1) of this document of the > +description and usage of the Generic ScatterWalk interface. > + > +It is recommended to enqueue cryptographic transformation requests into > +generic crypto queues. This allows for these requests to be processed in > +sequence as the cryptographic hardware becomes free. > + > + > +Single block cipher API > +======================= > + > +See source code comments for the *_cipher* calls in include/linux/crypto.h. > + > + > +Synchronous block cipher API > +============================ > + > +See source code comments for the *_blkcipher* calls in include/linux/crypto.h. > + > + > +Asynchronous block cipher API > +============================= > + > +See source code comments for the *_ablkcipher* calls and "ablkcipher_request_* > +calls in include/linux/crypto.h. > + > + > +Synchronous message digest API > +============================== > + > +See source code comments for the *_hash* calls in include/linux/crypto.h. > + > + > +Synchronous message digest API with caller-accessible state space > +================================================================= > + > +See source code comments for the *_shash* calls in include/crypto/hash.h. > + > + > +Asynchronous message digest API > +=============================== > + > +See source code comments for the *_ahash* calls and "ahash_request_* > +calls in include/crypto/hash.h. > + > + > +Random number generation API > +============================ > + > +See source code comments for the *_rng* calls in include/crypto/hash.h. > + > + > +AEAD asynchronous cipher API > +============================ > + > +See source code comments for the *_aead* calls and "aead_request_* > +calls in include/linux/crypto.h. These are all useful. But I wonder if it would be worth the effort to turn this inti a proper docbook document that automatically has everything together in one place? > + > +Authors > +======= > + > +Stephan Mueller > +Marek Vasut jon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/