Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753059AbaKDKxQ (ORCPT ); Tue, 4 Nov 2014 05:53:16 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:48121 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751256AbaKDKxM (ORCPT ); Tue, 4 Nov 2014 05:53:12 -0500 From: Gabriel FERNANDEZ To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Srinivas Kandagatla , Maxime Coquelin , Patrice Chotard , Russell King , Kishon Vijay Abraham I , Grant Likely Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kernel@stlinux.com, Lee Jones , Gabriel Fernandez Subject: [PATCH v5 0/8] phy: miphy28lp: Introduce support for MiPHY28lp Date: Tue, 4 Nov 2014 11:51:16 +0100 Message-Id: <1415098284-11182-1-git-send-email-gabriel.fernandez@linaro.org> X-Mailer: git-send-email 1.9.1 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.12.52,1.0.28,0.0.0000 definitions=2014-11-04_05:2014-11-03,2014-11-04,1970-01-01 signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Changes in v5: - split TYPE_USB define into TYPE_USB2 & TYPE_USB3 Changes in v4: - use a generic phy header file for dt binding - cosmetic correction - add comments Changes in v3: - split into separate smaller functions and can be resued for sata / pcie and usb - uses macros for registers and values - cosmetic correction from Kishon - create a common file for phy - cosmetic correction in phy-miphy28lp.txt file - change initialization of the registers from Srinivas - rename and simplify a procedure - Add Tx impedance and SSC support for SATA and PCI Hi Kishon, The goal of this series is to add the support of MiPHY28lp Generic PHY. I tried to be as close as possible to the MiPHY365x Lee Jones proposal. Best Regards Gabriel. Gabriel Fernandez (8): phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp phy: miphy28lp: Add PHY header file for DT x Driver defines phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY ARM: DT: STi: STiH407: Add DT node for MiPHY28lp phy: miphy28lp: Add SSC support for SATA phy: miphy28lp: Add SSC support for PCIE phy: miphy28lp: Tune tx impedance across Soc cuts ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY .../devicetree/bindings/phy/phy-miphy28lp.txt | 128 ++ arch/arm/boot/dts/stih407-b2120.dts | 11 + arch/arm/boot/dts/stih407.dtsi | 65 + arch/arm/configs/multi_v7_defconfig | 1 + drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/phy-miphy28lp.c | 1283 ++++++++++++++++++++ include/dt-bindings/phy/phy.h | 18 + 8 files changed, 1515 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt create mode 100644 drivers/phy/phy-miphy28lp.c create mode 100644 include/dt-bindings/phy/phy.h -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/