Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932089AbaKEJf2 (ORCPT ); Wed, 5 Nov 2014 04:35:28 -0500 Received: from mail-ie0-f182.google.com ([209.85.223.182]:50753 "EHLO mail-ie0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751241AbaKEJfX (ORCPT ); Wed, 5 Nov 2014 04:35:23 -0500 MIME-Version: 1.0 In-Reply-To: <1415081773.665.1.camel@plaes.org> References: <1415074039-16590-1-git-send-email-wens@csie.org> <1415074039-16590-4-git-send-email-wens@csie.org> <1415081773.665.1.camel@plaes.org> From: Chen-Yu Tsai Date: Wed, 5 Nov 2014 17:35:02 +0800 X-Google-Sender-Auth: J7_SkQK1Rzp2MSmyj6PaizRu34I Message-ID: Subject: Re: [linux-sunxi] [PATCH 3/6] phy: Add driver to support individual USB PHYs on sun9i To: Priit Laes Cc: linux-sunxi , Maxime Ripard , Kishon Vijay Abraham I , Mike Turquette , Grant Likely , Rob Herring , Hans de Goede , linux-arm-kernel , linux-kernel Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, On Tue, Nov 4, 2014 at 2:16 PM, Priit Laes wrote: > > On Tue, 2014-11-04 at 12:07 +0800, Chen-Yu Tsai wrote: >> Unlike previous Allwinner SoCs, there is no central PHY control block >> on the A80. Also, OTG support is completely split off into a >> different >> controller. >> >> This adds a new driver to support the regular USB PHYs. >> >> Signed-off-by: Chen-Yu Tsai >> --- >> .../devicetree/bindings/phy/sun9i-usb-phy.txt | 34 +++ >> drivers/phy/Kconfig | 12 ++ >> drivers/phy/Makefile | 1 + >> drivers/phy/phy-sun9i-usb.c | 227 >> +++++++++++++++++++++ >> 4 files changed, 274 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/sun9i-usb- >> phy.txt >> create mode 100644 drivers/phy/phy-sun9i-usb.c >> >> diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt >> b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt >> new file mode 100644 >> index 0000000..27a6067 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt >> @@ -0,0 +1,34 @@ >> +Allwinner sun9i USB PHY >> +----------------------- >> + >> +Required properties: >> +- compatible : should be one of >> + * allwinner,sun9i-a80-usb-phy >> +- reg : a list of offset + length pairs >> +- #phy-cells : from the generic phy bindings, must be 0 >> +- clocks : phandle + clock specifier for the phy clocks >> +- clock-names : >> + * "phy" for normal USB >> + * "hsic_480M", "hsic_12M" for HSIC >> +- resets : a list of phandle + reset specifier pairs >> +- reset-names : >> + * "phy" for normal USB >> + * "hsic" for HSIC >> +- phy_type : "hsic" for HSIC usage; >> + other values or >> absence of this property indicates normal USB >> + >> +It is recommended to list all clocks and resets available. >> +The driver will only use those matching the phy_type. >> + >> +Example: >> + usbphy1: phy@00a01800 { >> + compatible = "allwinner,sun9i-a80-usb-phy"; >> + reg = <0x00a01800 0x4>; >> + clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, >> + >> <&usb_phy_clk 3>; >> + clock-names = "hsic_480M", "hsic_12M", "phy"; >> + resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; >> + reset-names = "hsic", "phy"; >> + status = "disabled"; >> + #phy-cells = <0>; >> + }; >> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >> index 2a436e6..f5b7fbb 100644 >> --- a/drivers/phy/Kconfig >> +++ b/drivers/phy/Kconfig >> @@ -153,6 +153,18 @@ config PHY_SUN4I_USB >> This driver controls the entire USB PHY >> block, both the USB OTG >> parts, as well as the 2 regular USB 2 host >> PHYs. >> >> +config PHY_SUN9I_USB >> + tristate "Allwinner sun9i SoC USB PHY driver" > > Adding 'A80' to the user visible data makes things a bit easier for > end users: > "AllWinner sun9i (A80) SoC USB PHY driver" We explicitly left out "A80" from the description of the MACH_SUN9I Kconfig option. Keeping it the same here. But I will add a few more patches to this series to enable this by default in (sunxi and multiv7) defconfigs. >> + depends on ARCH_SUNXI && HAS_IOMEM && OF >> + depends on RESET_CONTROLLER >> + select USB_PHY >> + select GENERIC_PHY >> + help >> + Enable this to support the transceiver that >> is part of Allwinner >> + sun9i SoCs. > > And extra 'A80' here wouldn't hurt either. > >> + >> + This driver controls each individual USB 2 >> host PHY. >> + >> config PHY_SAMSUNG_USB2 >> tristate "Samsung USB 2.0 PHY driver" >> depends on HAS_IOMEM >> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile >> index c4590fc..c3977dc 100644 >> --- a/drivers/phy/Makefile >> +++ b/drivers/phy/Makefile >> @@ -17,6 +17,7 @@ obj-$(CONFIG_TWL4030_USB) += phy- >> twl4030-usb.o >> obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o >> obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o >> obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o >> +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o >> obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o >> phy-exynos-usb2-y += phy-samsung-usb2.o >> phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210- >> usb2.o >> diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/phy-sun9i- >> usb.c >> new file mode 100644 >> index 0000000..f9085d9 >> --- /dev/null >> +++ b/drivers/phy/phy-sun9i-usb.c >> @@ -0,0 +1,227 @@ >> +/* >> + * Allwinner sun9i USB phy driver >> + * >> + * Copyright (C) 2014 Chen-Yu Tsai >> + * >> + * Based on phy-sun9i.c from >> + * Hans de Goede >> + * >> + * and code from >> + * Allwinner Technology Co., Ltd. >> + * >> + * This program is free software; you can redistribute it and/or >> modify >> + * it under the terms of the GNU General Public License as >> published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#define SUNXI_AHB_ICHR8_EN BIT(10) >> +#define SUNXI_AHB_INCR4_BURST_EN BIT(9) >> +#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) >> +#define SUNXI_ULPI_BYPASS_EN BIT(0) >> + >> +struct sun9i_usb_phy { >> + struct phy *phy; >> + void __iomem *pmu; >> + struct regulator *vbus; >> + struct reset_control *reset; >> + struct clk *clk; >> + struct clk *hsic_clk; >> +}; >> + >> +static void sun9i_usb_phy_passby(struct sun9i_usb_phy *phy, int >> enable) >> +{ >> + u32 bits, reg_value; >> + >> + bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN | >> + SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; >> + >> + reg_value = readl(phy->pmu); >> + >> + if (enable) >> + reg_value |= bits; >> + else >> + reg_value &= ~bits; >> + >> + writel(reg_value, phy->pmu); >> +} >> + >> +static int sun9i_usb_phy_init(struct phy *_phy) >> +{ >> + struct sun9i_usb_phy *phy = phy_get_drvdata(_phy); >> + int ret; >> + >> + ret = clk_prepare_enable(phy->clk); >> + if (ret) >> + return ret; >> + >> + if (phy->hsic_clk) { >> + ret = clk_prepare_enable(phy->hsic_clk); >> + if (ret) { >> + clk_disable_unprepare(phy->clk); >> + return ret; >> + } >> + } >> + >> + ret = reset_control_deassert(phy->reset); >> + if (ret) { >> + if (phy->hsic_clk) >> + clk_disable_unprepare(phy->hsic_clk); >> + clk_disable_unprepare(phy->clk); >> + return ret; >> + } >> + >> + sun9i_usb_phy_passby(phy, 1); >> + >> + return 0; >> +} >> + >> +static int sun9i_usb_phy_exit(struct phy *_phy) >> +{ >> + struct sun9i_usb_phy *phy = phy_get_drvdata(_phy); >> + >> + sun9i_usb_phy_passby(phy, 0); >> + reset_control_assert(phy->reset); >> + if (phy->hsic_clk) >> + clk_disable_unprepare(phy->hsic_clk); >> + clk_disable_unprepare(phy->clk); >> + >> + return 0; >> +} >> + >> +static int sun9i_usb_phy_power_on(struct phy *_phy) >> +{ >> + struct sun9i_usb_phy *phy = phy_get_drvdata(_phy); >> + int ret = 0; >> + >> + if (phy->vbus) >> + ret = regulator_enable(phy->vbus); >> + >> + return ret; >> +} >> + >> +static int sun9i_usb_phy_power_off(struct phy *_phy) >> +{ >> + struct sun9i_usb_phy *phy = phy_get_drvdata(_phy); >> + >> + if (phy->vbus) >> + regulator_disable(phy->vbus); >> + >> + return 0; >> +} >> + >> +static struct phy_ops sun9i_usb_phy_ops = { >> + .init = sun9i_usb_phy_init, >> + .exit = sun9i_usb_phy_exit, >> + .power_on= sun9i_usb_phy_power_on, >> + .power_off= sun9i_usb_phy_power_off, >> + .owner = THIS_MODULE, >> +}; >> + >> +static int sun9i_usb_phy_probe(struct platform_device *pdev) >> +{ >> + struct sun9i_usb_phy *phy; >> + struct device *dev = &pdev->dev; >> + struct device_node *np = dev->of_node; >> + struct phy_provider *phy_provider; >> + struct resource *res; >> + enum usb_phy_interface phy_type; >> + >> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); >> + if (!phy) >> + return -ENOMEM; >> + >> + phy->vbus = devm_regulator_get_optional(dev, "vbus"); >> + if (IS_ERR(phy->vbus)) { >> + if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) >> + return -EPROBE_DEFER; >> + phy->vbus = NULL; >> + } >> + >> + phy_type = of_usb_get_phy_mode(np); >> + if (phy_type == USBPHY_INTERFACE_MODE_HSIC) { >> + phy->clk = devm_clk_get(dev, "hsic_480M"); >> + if (IS_ERR(phy->clk)) { >> + dev_err(dev, "failed to get hsic_480M >> clock\n"); >> + return PTR_ERR(phy->clk); >> + } >> + >> + phy->hsic_clk = devm_clk_get(dev, "hsic_12M"); >> + if (IS_ERR(phy->clk)) { >> + dev_err(dev, "failed to get hsic_12M >> clock\n"); >> + return PTR_ERR(phy->clk); >> + } >> + >> + phy->reset = devm_reset_control_get(dev, "hsic"); >> + if (IS_ERR(phy->reset)) { >> + dev_err(dev, "failed to get reset >> control\n"); >> + return PTR_ERR(phy->reset); >> + } >> + } else { >> + phy->clk = devm_clk_get(dev, "phy"); >> + if (IS_ERR(phy->clk)) { >> + dev_err(dev, "failed to get phy clock\n"); >> + return PTR_ERR(phy->clk); >> + } >> + >> + phy->reset = devm_reset_control_get(dev, "phy"); >> + if (IS_ERR(phy->reset)) { >> + dev_err(dev, "failed to get reset >> control\n"); >> + return PTR_ERR(phy->reset); >> + } >> + } >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + phy->pmu = devm_ioremap_resource(dev, res); >> + if (IS_ERR(phy->pmu)) >> + return PTR_ERR(phy->pmu); >> + >> + phy->phy = devm_phy_create(dev, NULL, &sun9i_usb_phy_ops, >> NULL); >> + if (IS_ERR(phy->phy)) { >> + dev_err(dev, "failed to create PHY\n"); >> + return PTR_ERR(phy->phy); >> + } >> + >> + phy_set_drvdata(phy->phy, phy); >> + dev_set_drvdata(dev, phy); >> + phy_provider = devm_of_phy_provider_register(dev, >> of_phy_simple_xlate); >> + >> + return PTR_ERR_OR_ZERO(phy_provider); >> +} >> + >> +static const struct of_device_id sun9i_usb_phy_of_match[] = { >> + { .compatible = "allwinner,sun9i-a80-usb-phy" }, >> + { }, >> +}; >> +MODULE_DEVICE_TABLE(of, sun9i_usb_phy_of_match); >> + >> +static struct platform_driver sun9i_usb_phy_driver = { >> + .probe = sun9i_usb_phy_probe, >> + .driver = { >> + .of_match_table= sun9i_usb_phy_of_match, >> + .name = "sun9i-usb-phy", >> + } >> +}; >> +module_platform_driver(sun9i_usb_phy_driver); >> + >> +MODULE_DESCRIPTION("Allwinner sun9i USB phy driver"); >> +MODULE_AUTHOR("Chen-Yu Tsai "); >> +MODULE_LICENSE("GPL v2"); >> -- >> 2.1.1 >> >> -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/