Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751415AbaKFBgW (ORCPT ); Wed, 5 Nov 2014 20:36:22 -0500 Received: from smtp1.tech.numericable.fr ([82.216.111.37]:35696 "EHLO smtp1.tech.numericable.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750931AbaKFBgT (ORCPT ); Wed, 5 Nov 2014 20:36:19 -0500 Message-ID: <545AD080.9080408@laposte.net> Date: Thu, 06 Nov 2014 02:36:00 +0100 From: Barto User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.2.0 MIME-Version: 1.0 To: Bjorn Helgaas CC: Chuansheng Liu , Aaron Lu , Tejun Heo , Rafael Wysocki , "linux-pci@vger.kernel.org" , "linux-kernel@vger.kernel.org" Subject: Re: [PATCH] PCI: Do not enable async suspend for JMicron chips References: <1415151063-2530-1-git-send-email-chuansheng.liu@intel.com> <545A7087.3050802@laposte.net> In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit X-VR-SPAMSTATE: OK X-VR-SPAMSCORE: -100 X-VR-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeejhedrhedvgdduuddvucetufdoteggodetrfcurfhrohhfihhlvgemucfpfgfogfftkfevteeunffgnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefkfffhfgggvffufhgjtgfgsehtkegrtddtfeejnecuhfhrohhmpeeurghrthhouceomhhishhtvghrrdhfrhgvvghmrghnsehlrghpohhsthgvrdhnvghtqeenucffohhmrghinhepkhgvrhhnvghlrdhorhhg Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Bjorn : the patch initialy created for bug 81551 ( ATAPI-CD-ROM-drive dead after resume from suspend/s2disk ) was not enough for the bug 84861 ( JMicron Technology Corp. JMB368 IDE controller dead after resume when async suspend is enabled ), the reason : there are too much models inside the family of JMBxxx JMicron SATA/IDE controlers PCI cards, and the first patch targets ONLY the JMB363/361 model, which is not enough : if (pdev->vendor == PCI_VENDOR_ID_JMICRON && + (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || + pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) + device_disable_async_suspend(&pdev->dev); for example I have a JMB363/368 JMicron SATA/IDE PCI card, and the first patch created for the bug 81551 is not enough, that's why Chuansheng Liu created a new patch who targets ALL models of JMicron JMBxxx SATA/IDE cards, in order to be sure that these models of JMicron will have "async_suspend feature disabled, the good patch who works for all models of JMicron JMBxx SATA/IDE controlers : + if (dev->vendor != PCI_VENDOR_ID_JMICRON) + device_enable_async_suspend(&dev->dev); dev->wakeup_prepared = false; Le 05/11/2014 20:03, Bjorn Helgaas a écrit : > On Wed, Nov 5, 2014 at 11:46 AM, Barto wrote: >> this patch solves these 2 bug reports : >> >> https://bugzilla.kernel.org/show_bug.cgi?id= >> >> https://bugzilla.kernel.org/show_bug.cgi?id=81551 > > Those bugs were already mentioned. But e6b7e41cdd8c claims to solve > https://bugzilla.kernel.org/show_bug.cgi?id=81551, and 84861 is a > duplicate of 81551, so it should also be fixed by e6b7e41cdd8c. > > So the question is, why was e6b7e41cdd8c insufficient? Presumably it > was tested and somebody thought it did fix the problem. > >> in simple words : JMicron IDE/Sata controlers family ( JMBxxx ) are not >> fully compatible with async_suspend feature, when a user tries to put >> his PC on standby mode then at wake-up JMicron IDE/Sata controlers will >> not work, because of a brother-relation between the SATA and IDE part on >> this JMicron PCI card >> >> >> >> >> Le 05/11/2014 19:01, Bjorn Helgaas a écrit : >>> On Tue, Nov 4, 2014 at 6:31 PM, Chuansheng Liu wrote: >>>> The JMicron chip 361/363/368 contains one SATA controller and >>>> one PATA controller, they are brother-relation ship in PCI tree, >>>> but for powering on these both controller, we must follow the >>>> sequence one by one, otherwise one of them can not be powered on >>>> successfully. >>> >>> This should mention what's broken and what problem a user would see. >>> This changelog sounds a lot like the one for e6b7e41cdd8c, so I don't >>> know if this is for a new, related problem, or what. >>> >>>> So here we disable the async suspend method for Jmicron chip. >>>> >>>> Bug link: >>>> https://bugzilla.kernel.org/show_bug.cgi?id=81551 >>>> https://bugzilla.kernel.org/show_bug.cgi?id=84861 >>>> >>>> And we can revert the below commit after this patch is applied: >>>> e6b7e41(ata: Disabling the async PM for JMicron chip 363/361) >>>> >>>> Cc: stable@vger.kernel.org # 3.15+ >>>> Acked-by: Aaron Lu >>>> Signed-off-by: Chuansheng Liu >>>> --- >>>> drivers/pci/pci.c | 12 +++++++++++- >>>> 1 file changed, 11 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c >>>> index 625a4ac..53128f0 100644 >>>> --- a/drivers/pci/pci.c >>>> +++ b/drivers/pci/pci.c >>>> @@ -2046,7 +2046,17 @@ void pci_pm_init(struct pci_dev *dev) >>>> pm_runtime_forbid(&dev->dev); >>>> pm_runtime_set_active(&dev->dev); >>>> pm_runtime_enable(&dev->dev); >>>> - device_enable_async_suspend(&dev->dev); >>>> + >>>> + /* >>>> + * The JMicron chip 361/363/368 contains one SATA controller and >>>> + * one PATA controller, they are brother-relation ship in PCI tree, >>>> + * but for powering on these both controller, we must follow the >>>> + * sequence one by one, otherwise one of them can not be powered on >>>> + * successfully, so here we disable the async suspend method for >>>> + * Jmicron chip. >>>> + */ >>>> + if (dev->vendor != PCI_VENDOR_ID_JMICRON) >>>> + device_enable_async_suspend(&dev->dev); >>> >>> I don't like littering the core PCI code with vendor tests like this. >>> This would be the only one, except for an ancient DECchip 21050 bridge >>> erratum. >>> >>> And why would we want a test for *all* JMicron devices here, when you >>> claim the problem only affects a few specific ones? >>> >>> And what's the story with the e6b7e41cdd8c ("ata: Disabling the async >>> PM for JMicron chip 363/361") connection? Is something broken even >>> with e6b7e41cdd8c, and this is a better fix? Or is this simply a >>> different way of fixing the same problem? >>> >>>> dev->wakeup_prepared = false; >>>> >>>> dev->pm_cap = 0; >>>> -- >>>> 1.7.9.5 >>>> >>> > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/