Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752575AbaKFKBN (ORCPT ); Thu, 6 Nov 2014 05:01:13 -0500 Received: from opensource.wolfsonmicro.com ([80.75.67.52]:41786 "EHLO opensource.wolfsonmicro.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752324AbaKFKBH (ORCPT ); Thu, 6 Nov 2014 05:01:07 -0500 Date: Thu, 6 Nov 2014 10:01:04 +0000 From: Charles Keepax To: Riku Voipio Cc: "Stam, Michel [FINT]" , freddy@asix.com.tw, davem@davemloft.net, linux-usb@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org Subject: Re: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net on arndale platform Message-ID: <20141106100104.GS23178@opensource.wolfsonmicro.com> References: <20141104072236.GA559@afflict.kos.to> <20141104094336.GA3145@afflict.kos.to> <20141104200914.GN23178@opensource.wolfsonmicro.com> <20141105150258.GR23178@opensource.wolfsonmicro.com> <20141106090651.GA19109@afflict.kos.to> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20141106090651.GA19109@afflict.kos.to> User-Agent: Mutt/1.5.17+20080114 (2008-01-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Nov 06, 2014 at 11:06:51AM +0200, Riku Voipio wrote: > On Wed, Nov 05, 2014 at 03:02:58PM +0000, Charles Keepax wrote: > > On Wed, Nov 05, 2014 at 01:04:37PM +0100, Stam, Michel [FINT] wrote: > > > Hello Charles, > > > > > > After looking around I found the reset value for the 8772 chip, which > > > seems to be 0x1E1 (ANAR register). > > > > > > This equates to (according to include/uapi/linux/mii.h) > > > ADVERTISE_ALL | ADVERTISE_CSMA. > > > > > > The register only seems to become 0 if the software reset fails. > > > Odd it definitely reads back as zero on Arndale. I am guessing > > that the root of the problem here is that for some reason Arndale > > POR of the ethernet is pants and it needs a full software reset > > before it will work and the patch removes the full reset > > callback. > > The asix on arndale comes semi-configured from u-boot, which I guess is > not the state kernel expects it to come in. At least in my case where > I use tftp from u-boot to load my kernel. > > So probably the full reset is needed here to make the asix chip come > to a truly pristine state. > > The commit that Michel partially reverted (by returning to use > ax88772_link_reset instead of ax88772_reset), indicates that a strong reset > is needed for suspend/resume as well: Ok I think I have cracked this one. I am pretty sure you are right that the USB comes to us in a strange state and needs a full reset, but that only needs to happen once when the driver is bound in. So there is some code in ax88772_bind that appears to try to reset the device but does a lot less than ax88772_reset and I think that must be the problem. Applying the following on top of the patch we have been debating I think will make everything work for all of us: --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -465,19 +465,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *in return ret; } - ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); - if (ret < 0) - return ret; - - msleep(150); - - ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); - if (ret < 0) - return ret; - - msleep(150); - - ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE); + ax88772_reset(dev); If you guys could test that and let me know how you get on I will send in a proper patch if it looks good. Thanks, Charles -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/