Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752653AbaKGRrr (ORCPT ); Fri, 7 Nov 2014 12:47:47 -0500 Received: from comal.ext.ti.com ([198.47.26.152]:37081 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751850AbaKGRrp (ORCPT ); Fri, 7 Nov 2014 12:47:45 -0500 From: Nishanth Menon To: Tony Lindgren CC: , , , , , , , , , Nishanth Menon Subject: [PATCH POST V2] ARM: dts: Add am57xx-beagle-x15 Date: Fri, 7 Nov 2014 11:47:13 -0600 Message-ID: <1415382433-31772-1-git-send-email-nm@ti.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org BeagleBoard-X15 is the next generation Open Source Hardware BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15 processor. The platform features 2GB DDR3L (w/dual 32bit busses), eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G Ethernet. For more information, refer to: BeagleBoard-X15 Wiki: http://www.elinux.org/Beagleboard:BeagleBoard-X15 AM5728 is part of the Sitara product family whose additional details will be available: http://www.ti.com/lsds/ti/arm/overview.page Technical Reference Manual for AM5728 is public domain at: http://www.ti.com/lit/spruhz6 Just add basic support for the moment, the following updates are needed: i) Ethernet - depends on SoC dts fixes ii) USB Client (USB2) - depends on GPIO extcon ii) HDMI - additional driver fixes pending iii) Audio - additional driver fixes pending NOTE: AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All unused power supply balls must be supplied with the voltages specified in the Section 5.2, Recommended Operating Conditions". This implies that all unused voltage rails for AM5728 can never be switched off even if the hardware blocks inside that voltage domain is unused. Switching off these unused rails may result in stability issues on other domains and increased leakage and power-on-hour impacts. Signed-off-by: Felipe Balbi Signed-off-by: Nishanth Menon --- Changes in V2 since V1: (was updated since v2 inline was posted https://patchwork.kernel.org/patch/5245961/ ) - Fix the missing squash of proper DDR size. - Update commit message on why VDD rails must be always-on - Fix commit message typos (thanks to G+ review :P ) - Explicit palmas sub irq level in dts (it is not configurable, but better to be properly documented) V1: https://patchwork.kernel.org/patch/5244801/ Additional references: - Missing ethernet dtsi patch series: http://marc.info/?t=141388585300001&r=1&w=2 - Missing USB Client extcon patch series: http://marc.info/?t=141520160800004&r=1&w=2 Tested with omap2plus_defconfig modified as: http://slexy.org/view/s2DRTzUwjj boot log: http://slexy.org/raw/s25Grf1uoo based on 3.18-rc1 tag. Support for u-boot has been posted as well: (series ending http://patchwork.ozlabs.org/patch/407552/ ) Side note: this patch generates a few unrelated checkpatch warning for compatible which probably is part of appropriate driver documentation fixes (functionality is already present). arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am57xx-beagle-x15.dts | 405 +++++++++++++++++++++++++++++++ 2 files changed, 406 insertions(+) create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89ca..eee1e4f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -347,6 +347,7 @@ dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \ + am57xx-beagle-x15.dtb \ dra72-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts new file mode 100644 index 0000000..49edbda --- /dev/null +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -0,0 +1,405 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra74x.dtsi" +#include +#include +#include + +/ { + model = "TI AM5728 BeagleBoard-X15"; + compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + + aliases { + rtc0 = &mcp_rtc; + rtc1 = &tps659038_rtc; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + vdd_3v3: fixedregulator-vdd_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + vin-supply = <®en1>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vtt_fixed: fixedregulator-vtt { + /* TPS51200 */ + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + vin-supply = <&smps3_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led@0 { + label = "beagle-x15:usr0"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@1 { + label = "beagle-x15:usr1"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@2 { + label = "beagle-x15:usr2"; + gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "beagle-x15:usr3"; + gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ide-disk"; + default-state = "off"; + }; + }; +}; + +&dra7_pmx_core { + leds_pins_default: leds_pins_default { + pinctrl-single,pins = < + 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ + 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ + 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ + 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ + >; + }; + + i2c1_pins_default: i2c1_pins_default { + pinctrl-single,pins = < + 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ + 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ + >; + }; + + i2c3_pins_default: i2c3_pins_default { + pinctrl-single,pins = < + 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ + 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ + >; + }; + + uart3_pins_default: uart3_pins_default { + pinctrl-single,pins = < + 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */ + 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */ + >; + }; + + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + tps659038_pins_default: tps659038_pins_default { + pinctrl-single,pins = < + 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ + >; + }; + + tmp102_pins_default: tmp102_pins_default { + pinctrl-single,pins = < + 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ + >; + }; + + mcp79410_pins_default: mcp79410_pins_default { + pinctrl-single,pins = < + 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_default>; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tps659038_pins_default>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + regulators { + smps12_reg: smps12 { + /* VDD_MPU */ + regulator-name = "smps12"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_DDR */ + regulator-name = "smps3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_CORE */ + regulator-name = "smps6"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-always-on; + regulator-boot-on; + }; + + /* SMPS7 unused */ + + smps8_reg: smps8 { + /* VDD_1V8 */ + regulator-name = "smps8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* SMPS9 unused */ + + ldo1_reg: ldo1 { + /* VDD_SD */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* VDD_SHV5 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + regen1: regen1 { + /* VDD_3V3_ON */ + regulator-name = "regen1"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659038_rtc: tps659038_rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&tps659038>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + tps659038_pwr_button: tps659038_pwr_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; + }; + + tmp102: tmp102@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&tmp102_pins_default>; + interrupt-parent = <&gpio7>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_default>; + clock-frequency = <400000>; + + mcp_rtc: rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + interrupt-parent = <&gic>; + interrupts = ; /* IRQ_SYS_1N */ + + pinctrl-names = "default"; + pinctrl-0 = <&mcp79410_pins_default>; + + vcc-supply = <&vdd_3v3>; + wakeup-source; + }; +}; + +&gpio7 { + ti,no-reset-on-init; + ti,no-idle-on-init; +}; + +&cpu0 { + cpu0-supply = <&smps12_reg>; + voltage-tolerance = <1>; +}; + +&uart3 { + status = "okay"; + interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x248>; + + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_default>; +}; + +&mmc1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + + vmmc-supply = <&ldo1_reg>; + vmmc_aux-supply = <&vdd_3v3>; + pbias-supply = <&pbias_mmc_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 0>; /* gpio 219 */ +}; + +&mmc2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; + + vmmc-supply = <&vdd_3v3>; + bus-width = <8>; + ti,non-removable; + cap-mmc-dual-data-rate; +}; + +&sata { + status = "okay"; +}; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/