From: Karol Wrona <k.wrona@samsung.com>
To: Jonathan Cameron <jic23@kernel.org>, linux-iio@vger.kernel.org,
        Arnd Bergmann <arnd@arndb.de>, linux-kernel@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Kyungmin Park <kyungmin.park@samsung.com>,
        Karol Wrona <k.wrona@samsung.com>
Subject: [PATCH 4/5] iio: sensorhub: Add sensorhub accelerometer sensor
Date: Sat, 08 Nov 2014 15:13:15 +0100
Message-id: <1415455996-20871-5-git-send-email-k.wrona@samsung.com>
In-reply-to: <1415455996-20871-1-git-send-email-k.wrona@samsung.com>
References: <1415455996-20871-1-git-send-email-k.wrona@samsung.com>
Sender: linux-kernel-owner@vger.kernel.org

This patch adds accelerometer iio driver which uses sensorhub as data
provider.

Change-Id: I4686741b7401ec5cbf4b5d0f2a5cc146fbe24d53
Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/iio/accel/Makefile           |    2 +
 drivers/iio/accel/ssp_accel_sensor.c |  211 ++++++++++++++++++++++++++++++++++
 2 files changed, 213 insertions(+)
 create mode 100644 drivers/iio/accel/ssp_accel_sensor.c

diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index a593996..2ab1ca6 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -16,3 +16,5 @@ st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o
 
 obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
 obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
+
+obj-$(CONFIG_SSP_SENSOR_IIO) += ssp_accel_sensor.o
diff --git a/drivers/iio/accel/ssp_accel_sensor.c b/drivers/iio/accel/ssp_accel_sensor.c
new file mode 100644
index 0000000..1293010
--- /dev/null
+++ b/drivers/iio/accel/ssp_accel_sensor.c
@@ -0,0 +1,211 @@
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+
+#include <linux/iio/common/ssp_sensors.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include "../common/ssp_sensors/ssp_iio_sensor.h"
+
+#define CHANNEL_COUNT 3
+
+#define SSP_ACCEL_NAME "ssp-accelrometer"
+static const char ssp_accel_device_name[] = SSP_ACCEL_NAME;
+
+enum accel_3d_channel {
+	CHANNEL_SCAN_INDEX_X,
+	CHANNEL_SCAN_INDEX_Y,
+	CHANNEL_SCAN_INDEX_Z,
+	CHANNEL_SCAN_INDEX_TIME,
+	ACCEL_3D_CHANNEL_MAX,
+};
+
+static int accel_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val,
+			  int *val2,
+			  long mask)
+{
+	int ret;
+	u32 t;
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		t = ssp_get_sensor_delay(data, SSP_ACCELEROMETER_SENSOR);
+		ssp_convert_to_freq(t, val, val2);
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int accel_write_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int val,
+			   int val2,
+			   long mask)
+{
+	int ret, value;
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		value = ssp_convert_to_time(val, val2);
+		ret = ssp_change_delay(data, SSP_ACCELEROMETER_SENSOR, value);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev, "accel sensor enable fail\n");
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static struct iio_info ssp_accel_iio_info = {
+	.read_raw = &accel_read_raw,
+	.write_raw = &accel_write_raw,
+};
+
+static const struct iio_chan_spec acc_channels[] = {
+	SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_X, CHANNEL_SCAN_INDEX_X),
+	SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_Y, CHANNEL_SCAN_INDEX_Y),
+	SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_Z, CHANNEL_SCAN_INDEX_Z),
+	IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIME),
+};
+
+static int process_accel_data(struct iio_dev *indio_dev, void *buf,
+			      int64_t timestamp)
+{
+	__le32 time = 0;
+	const int len = SSP_ACCELEROMETER_SIZE;
+	int64_t calculated_time;
+
+	if (indio_dev->scan_bytes == 0)
+		return indio_dev->scan_bytes;
+
+	if (indio_dev->scan_timestamp) {
+		memcpy(&time, &((char *)buf)[len], SSP_TIME_SIZE);
+		calculated_time =
+			timestamp + (int64_t)le32_to_cpu(time) * 1000000;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buf, calculated_time);
+
+	return indio_dev->scan_bytes;
+}
+
+static int ssp_accel_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	iio_buffer_unregister(indio_dev);
+	iio_kfifo_free(indio_dev->buffer);
+	iio_device_unregister(indio_dev);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops accel_buffer_ops = {
+	.postenable = &ssp_common_buffer_postenable,
+	.predisable = &ssp_common_buffer_predisable,
+};
+
+static int ssp_accel_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct iio_dev *indio_dev;
+	struct ssp_sensor_data  *spd;
+
+	indio_dev = iio_device_alloc(sizeof(*spd));
+	if (IS_ERR(indio_dev)) {
+		dev_err(&pdev->dev, "device alloc fail\n");
+		return PTR_ERR(indio_dev);
+	}
+
+	spd = iio_priv(indio_dev);
+
+	spd->process_data = process_accel_data;
+	spd->type = SSP_ACCELEROMETER_SENSOR;
+
+	indio_dev->name = ssp_accel_device_name;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->dev.of_node = pdev->dev.of_node;
+	indio_dev->info = &ssp_accel_iio_info;
+
+	if (indio_dev->info == NULL)
+		goto err_iio_alloc;
+
+	indio_dev->modes = INDIO_BUFFER_HARDWARE;
+	indio_dev->channels = acc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(acc_channels);
+
+	ret = ssp_common_setup_buffer(indio_dev, &accel_buffer_ops);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Buffer setup fail\n");
+		goto err_iio_alloc;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto err_iio_buffer;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	ssp_register_consumer(indio_dev, SSP_ACCELEROMETER_SENSOR);
+
+	return 0;
+
+err_iio_buffer:
+	iio_buffer_unregister(indio_dev);
+	iio_kfifo_free(indio_dev->buffer);
+err_iio_alloc:
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static const struct of_device_id ssp_accel_id_table[] = {
+	{
+		.compatible = "samsung,mpu6500-accel",
+	},
+	{},
+};
+
+static struct platform_driver ssp_accel_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = SSP_ACCEL_NAME,
+		.of_match_table = ssp_accel_id_table,
+	},
+	.probe = ssp_accel_probe,
+	.remove =  ssp_accel_remove,
+};
+
+module_platform_driver(ssp_accel_driver);
+
+MODULE_AUTHOR("Karol Wrona <k.wrona@samsung.com>");
+MODULE_DESCRIPTION("Samsung sensorhub accelerometers driver");
+MODULE_LICENSE("GPL");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/