Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751813AbaKKRdJ (ORCPT ); Tue, 11 Nov 2014 12:33:09 -0500 Received: from fw-tnat.cambridge.arm.com ([217.140.96.21]:53327 "EHLO cam-smtp0.cambridge.arm.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751392AbaKKRcx (ORCPT ); Tue, 11 Nov 2014 12:32:53 -0500 From: Liviu Dudau To: arm@kernel.org, Olof Johansson , Arnd Bergmann , Kevin Hilman Cc: Catalin Marinas , Mark Rutland , Pawel Moll , Will Deacon , device tree , LAKML , LKML , Rob Herring , Ian Campbell , Kumar Gala Subject: [PATCH v3 2/2] arm64: Add Juno board device tree. Date: Tue, 11 Nov 2014 17:32:11 +0000 Message-Id: <1415727131-4572-3-git-send-email-Liviu.Dudau@arm.com> X-Mailer: git-send-email 2.1.3 In-Reply-To: <1415727131-4572-1-git-send-email-Liviu.Dudau@arm.com> References: <1415727131-4572-1-git-send-email-Liviu.Dudau@arm.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This adds support for ARM's Juno development board (rev 0). It enables most of the board peripherals: UART, I2C, USB, MMC and 100Mb ethernet. There is no support at the moment for clock setting and HDLCD driver which depends on it. Signed-off-by: Liviu Dudau --- arch/arm64/boot/dts/arm/Makefile | 1 + arch/arm64/boot/dts/arm/juno-clocks.dtsi | 45 ++++++ arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 129 +++++++++++++++ arch/arm64/boot/dts/arm/juno.dts | 218 ++++++++++++++++++++++++++ 4 files changed, 393 insertions(+) create mode 100644 arch/arm64/boot/dts/arm/juno-clocks.dtsi create mode 100644 arch/arm64/boot/dts/arm/juno-motherboard.dtsi create mode 100644 arch/arm64/boot/dts/arm/juno.dts diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 43d1404..301a0da 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi new file mode 100644 index 0000000..adbc82a --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -0,0 +1,45 @@ +/* + * ARM Juno Platform clocks + * + * Copyright (c) 2013-2014 ARM Ltd + * + * This file is licensed under a dual GPLv2 or BSD license. + * + */ + + /* SoC fixed clocks */ + soc_uartclk: refclk72738khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <7273800>; + clock-output-names = "juno:uartclk"; + }; + + soc_usb48mhz: clk48mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "clk48mhz"; + }; + + soc_smc50mhz: clk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "smc_clk"; + }; + + soc_refclk100mhz: refclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "apb_pclk"; + }; + + soc_faxiclk: refclk533mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <533000000>; + clock-output-names = "faxi_clk"; + }; + diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi new file mode 100644 index 0000000..c138b95 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -0,0 +1,129 @@ +/* + * ARM Juno Platform motherboard peripherals + * + * Copyright (c) 2013-2014 ARM Ltd + * + * This file is licensed under a dual GPLv2 or BSD license. + * + */ + + mb_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "juno_mb:clk24mhz"; + }; + + mb_clk25mhz: clk25mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "juno_mb:clk25mhz"; + }; + + motherboard { + compatible = "arm,vexpress,v2p-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + model = "V2M-Juno"; + arm,hbi = <0x252>; + arm,vexpress,site = <0>; + arm,v2m-memory-map = "rs1"; + + mb_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "MCC_SB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ethernet@2,00000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <2 0x00000000 0x10000>; + interrupts = <3>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + clocks = <&mb_clk25mhz>; + vdd33a-supply = <&mb_fixed_3v3>; + vddvario-supply = <&mb_fixed_3v3>; + }; + + usb@5,00000000 { + compatible = "nxp,usb-isp1763"; + reg = <5 0x00000000 0x20000>; + bus-width = <16>; + interrupts = <4>; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <5>; + /* cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; */ + max-frequency = <12000000>; + vmmc-supply = <&mb_fixed_3v3>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x10000>; + interrupts = <7>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x10000>; + interrupts = <9>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "timclken1", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x10000>; + interrupts = <9>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "timclken1", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x10000>; + interrupts = <0>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + }; + }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts new file mode 100644 index 0000000..097ecc4 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -0,0 +1,218 @@ +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2013-2014 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include + +/ { + model = "ARM Juno development board (r0)"; + compatible = "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = &soc_uart0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + }; + + A57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* last 16MB of the first memory area is reserved for secure world use by firmware */ + reg = <0x00000000 0x80000000 0x0 0x7f000000>, + <0x00000008 0x80000000 0x1 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = , + , + , + , + , + ; + }; + + /include/ "juno-clocks.dtsi" + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + soc_uart0: uart@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = ; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + dvi0: dvi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + }; + + dvi1: dvi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + }; + }; + + ohci@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = ; + clocks = <&soc_usb48mhz>; + }; + + ehci@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = ; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = , + ; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "juno-motherboard.dtsi" + }; +}; -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/