Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754340AbaKNFlb (ORCPT ); Fri, 14 Nov 2014 00:41:31 -0500 Received: from bear.ext.ti.com ([192.94.94.41]:54299 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752343AbaKNFl1 (ORCPT ); Fri, 14 Nov 2014 00:41:27 -0500 From: Vignesh R To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Benoit Cousson , Tony Lindgren , Russell King , Jonathan Cameron , Hartmut Knaack , , Dmitry Torokhov , Lee Jones , Sebastian Andrzej Siewior CC: Lars-Peter Clausen , Peter Meerwald , Samuel Ortiz , Felipe Balbi , Vignesh R , Brad Griffis , Sanjeev Sharma , Paul Gortmaker , Jan Kardell , , , , , , Subject: [PATCH v4 4/6] ARM: dts: AM335x: Make charge delay a DT parameter for TSC Date: Fri, 14 Nov 2014 10:37:29 +0530 Message-ID: <1415941651-28962-5-git-send-email-vigneshr@ti.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1415941651-28962-1-git-send-email-vigneshr@ti.com> References: <1415941651-28962-1-git-send-email-vigneshr@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The charge delay value is by default 0x400. But it can be set to lower values on some boards, as long as false pen-ups are avoided. Lowering the value increases the sampling rate (though current sampling rate is sufficient for TSC operation). In some boards, the value has to be increased to avoid false pen-up events. Hence, charge delay has been made a DT parameter. Signed-off-by: Vignesh R --- v4: - Set charge delay to 0x400 as default. Most devices function normally at this value .../devicetree/bindings/input/touchscreen/ti-tsc-adc.txt | 15 +++++++++++++++ arch/arm/boot/dts/am335x-evm.dts | 1 + 2 files changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt index 878549ba814d..6df5028a4ad3 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -28,6 +28,20 @@ Required properties: ti,adc-channels: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. +Optional properties: +- child "tsc" + ti,charge-delay: Length of touch screen charge delay step in terms of + ADC clock cycles. Charge delay value should be large + in order to avoid false pen-up events. This value + affects the overall sampling speed, hence need to be + kept as low as possible, while avoiding false pen-up + event. Start from a lower value, say 0x400, and + increase value until false pen-up events are avoided. + The pen-up detection happens immediately after the + charge step, so this does in fact function as a + hardware knob for adjusting the amount of "settling + time". + Example: tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; @@ -36,6 +50,7 @@ Example: ti,x-plate-resistance = <200>; ti,coordiante-readouts = <5>; ti,wire-config = <0x00 0x11 0x22 0x33>; + ti,charge-delay = <0x400>; }; adc { diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index e2156a583de7..ce12f6ef1e28 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -641,6 +641,7 @@ ti,x-plate-resistance = <200>; ti,coordinate-readouts = <5>; ti,wire-config = <0x00 0x11 0x22 0x33>; + ti,charge-delay = <0x400>; }; adc { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/