Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965386AbaKNLu7 (ORCPT ); Fri, 14 Nov 2014 06:50:59 -0500 Received: from mail.kapsi.fi ([217.30.184.167]:43826 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965175AbaKNLuz (ORCPT ); Fri, 14 Nov 2014 06:50:55 -0500 From: Mikko Perttunen To: swarren@wwwdotorg.org, thierry.reding@gmail.com, gnurou@gmail.com Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-tegra@vger.kernel.org, wni@nvidia.com, Mikko Perttunen Subject: [PATCH v5 1/3] of: Add descriptions of thermtrip properties to Tegra PMC bindings Date: Fri, 14 Nov 2014 13:50:35 +0200 Message-Id: <1415965837-29331-2-git-send-email-mikko.perttunen@kapsi.fi> X-Mailer: git-send-email 2.1.3 In-Reply-To: <1415965837-29331-1-git-send-email-mikko.perttunen@kapsi.fi> References: <1415965837-29331-1-git-send-email-mikko.perttunen@kapsi.fi> X-SA-Exim-Connect-IP: 2001:708:30:12d0:beee:7bff:fe5b:f272 X-SA-Exim-Mail-From: mikko.perttunen@kapsi.fi X-SA-Exim-Scanned: No (on mail.kapsi.fi); SAEximRunCond expanded to false Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Mikko Perttunen Hardware-triggered thermal reset requires configuring the I2C reset procedure. This configuration is read from the device tree, so document the relevant properties in the binding documentation. Signed-off-by: Mikko Perttunen --- .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index 68ac65f..2fd5051 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -47,6 +47,23 @@ Required properties when nvidia,suspend-mode=<0>: sleep mode, the warm boot code will restore some PLLs, clocks and then bring up CPU0 for resuming the system. +Hardware-triggered thermal reset: +On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists, +hardware-triggered thermal reset will be enabled. + +Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): +- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are + described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the + Tegra K1 Technical Reference Manual. +- nvidia,bus-addr : Bus address of the PMU on the I2C bus +- nvidia,reg-addr : I2C register address to write poweroff command to +- nvidia,reg-data : Poweroff command to write to PMU + +Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): +- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command. + Defaults to 0. Valid values are described in section 12.5.2 + "Pinmux Support" of the Tegra4 Technical Reference Manual. + Example: / SoC dts including file @@ -69,6 +86,15 @@ pmc@7000f400 { / Tegra board dts file { ... + pmc@7000f400 { + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x40>; + nvidia,reg-addr = <0x36>; + nvidia,reg-data = <0x2>; + }; + }; + ... clocks { compatible = "simple-bus"; #address-cells = <1>; -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/