Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965680AbaKNP3g (ORCPT ); Fri, 14 Nov 2014 10:29:36 -0500 Received: from down.free-electrons.com ([37.187.137.238]:36163 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1161471AbaKNP16 (ORCPT ); Fri, 14 Nov 2014 10:27:58 -0500 From: Antoine Tenart To: sebastian.hesselbarth@gmail.com, Peter.Chen@freescale.com, balbi@ti.com, p.zabel@pengutronix.de Cc: Antoine Tenart , alexandre.belloni@free-electrons.com, thomas.petazzoni@free-electrons.com, zmxu@marvell.com, jszhang@marvell.com, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v7 10/13] ARM: dts: berlin: add BG2Q nodes for USB support Date: Fri, 14 Nov 2014 16:26:00 +0100 Message-Id: <1415978763-27345-11-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 2.1.0 In-Reply-To: <1415978763-27345-1-git-send-email-antoine.tenart@free-electrons.com> References: <1415978763-27345-1-git-send-email-antoine.tenart@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q SoC has 3 USB host controller, compatible with ChipIdea. Signed-off-by: Antoine Tenart --- arch/arm/boot/dts/berlin2q.dtsi | 55 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 2de8d6f8973c..834142bdfbb1 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -114,6 +114,40 @@ #interrupt-cells = <3>; }; + usb_phy2: phy@a2f400 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xa2f400 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 14>; + status = "disabled"; + }; + + usb2: usb@a30000 { + compatible = "chipidea,usb2"; + reg = <0xa30000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB2>; + phys = <&usb_phy2>; + phy-names = "usb-phy"; + status = "disabled"; + }; + + usb_phy0: phy@b74000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xb74000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 12>; + status = "disabled"; + }; + + usb_phy1: phy@b78000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xb78000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 13>; + status = "disabled"; + }; + eth0: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; @@ -365,6 +399,26 @@ }; }; + usb0: usb@ed0000 { + compatible = "chipidea,usb2"; + reg = <0xed0000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB0>; + phys = <&usb_phy0>; + phy-names = "usb-phy"; + status = "disabled"; + }; + + usb1: usb@ee0000 { + compatible = "chipidea,usb2"; + reg = <0xee0000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB1>; + phys = <&usb_phy1>; + phy-names = "usb-phy"; + status = "disabled"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -457,5 +511,6 @@ interrupts = ; }; }; + }; }; -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/