Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1422789AbaKNVPl (ORCPT ); Fri, 14 Nov 2014 16:15:41 -0500 Received: from mail-wi0-f171.google.com ([209.85.212.171]:62418 "EHLO mail-wi0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1422748AbaKNVPg (ORCPT ); Fri, 14 Nov 2014 16:15:36 -0500 From: Matt Fleming To: Peter Zijlstra , Ingo Molnar , Jiri Olsa , Arnaldo Carvalho de Melo , Andi Kleen Cc: Thomas Gleixner , linux-kernel@vger.kernel.org, "H. Peter Anvin" , Kanaka Juvva , Matt Fleming Subject: [PATCH v4 10/11] perf/x86/intel: Perform rotation on Intel CQM RMIDs Date: Fri, 14 Nov 2014 21:15:11 +0000 Message-Id: <1415999712-5850-11-git-send-email-matt@console-pimps.org> X-Mailer: git-send-email 1.9.3 In-Reply-To: <1415999712-5850-1-git-send-email-matt@console-pimps.org> References: <1415999712-5850-1-git-send-email-matt@console-pimps.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Matt Fleming There are many use cases where people will want to monitor more tasks than there exist RMIDs in the hardware, meaning that we have to perform some kind of multiplexing. We do this by "rotating" the RMIDs in a workqueue, and assigning an RMID to a waiting event when the RMID becomes unused. This scheme reserves one RMID at all times for rotation. When we need to schedule a new event we give it the reserved RMID, pick a victim event from the front of the global CQM list and wait for the victim's RMID to drop to zero occupancy, before it becomes the new reserved RMID. We put the victim's RMID onto the limbo list, where it resides for a "minimum queue time", which is intended to save ourselves an expensive smp IPI when the RMID is unlikely to have a occupancy value below __intel_cqm_threshold. If we fail to recycle an RMID, even after waiting the minimum queue time then we need to increment __intel_cqm_threshold. There is an upper bound on this threshold, __intel_cqm_max_threshold, which is programmable from userland as /sys/devices/intel_cqm/max_recycling_threshold. The comments above __intel_cqm_rmid_rotate() have more details. Cc: Peter Zijlstra Signed-off-by: Matt Fleming --- Changes in v4: - Calculate __intel_cqm_max_threshold based on the size of the LLC and number of RMIDs - Drop the list, bitmap, list dance in the rotation code and just use the limbo list but add a ->state member to the RMID struct so we can track when an RMID has been recycled - Use pmu::hrtimer_interval_ms for our rotation timer tick arch/x86/kernel/cpu/perf_event_intel_cqm.c | 640 ++++++++++++++++++++++++++--- 1 file changed, 592 insertions(+), 48 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_cqm.c b/arch/x86/kernel/cpu/perf_event_intel_cqm.c index 2bd023f8fb6a..df15d28c00e3 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_cqm.c +++ b/arch/x86/kernel/cpu/perf_event_intel_cqm.c @@ -25,9 +25,13 @@ struct intel_cqm_state { static DEFINE_PER_CPU(struct intel_cqm_state, cqm_state); /* - * Protects cache_cgroups and cqm_rmid_lru. + * Protects cache_cgroups and cqm_rmid_free_lru and cqm_rmid_limbo_lru. + * Also protects event->hw.cqm_rmid + * + * Hold either for stability, both for modification of ->hw.cqm_rmid. */ static DEFINE_MUTEX(cache_mutex); +static DEFINE_RAW_SPINLOCK(cache_lock); /* * Groups of events that have the same target(s), one RMID per group. @@ -46,7 +50,34 @@ static cpumask_t cqm_cpumask; #define QOS_EVENT_MASK QOS_L3_OCCUP_EVENT_ID -static u64 __rmid_read(unsigned long rmid) +/* + * This is central to the rotation algorithm in __intel_cqm_rmid_rotate(). + * + * This rmid is always free and is guaranteed to have an associated + * near-zero occupancy value, i.e. no cachelines are tagged with this + * RMID, once __intel_cqm_rmid_rotate() returns. + */ +static unsigned int intel_cqm_rotation_rmid; + +#define INVALID_RMID (-1) + +/* + * Is @rmid valid for programming the hardware? + * + * rmid 0 is reserved by the hardware for all non-monitored tasks, which + * means that we should never come across an rmid with that value. + * Likewise, an rmid value of -1 is used to indicate "no rmid currently + * assigned" and is used as part of the rotation code. + */ +static inline bool __rmid_valid(unsigned int rmid) +{ + if (!rmid || rmid == INVALID_RMID) + return false; + + return true; +} + +static u64 __rmid_read(unsigned int rmid) { u64 val; @@ -64,13 +95,21 @@ static u64 __rmid_read(unsigned long rmid) return val; } +enum rmid_recycle_state { + RMID_YOUNG = 0, + RMID_AVAILABLE, + RMID_DIRTY, +}; + struct cqm_rmid_entry { - u64 rmid; + unsigned int rmid; struct list_head list; + unsigned long queue_time; + enum rmid_recycle_state state; }; /* - * A least recently used list of RMIDs. + * cqm_rmid_free_lru - A least recently used list of RMIDs. * * Oldest entry at the head, newest (most recently used) entry at the * tail. This list is never traversed, it's only used to keep track of @@ -81,9 +120,18 @@ struct cqm_rmid_entry { * in use. To mark an RMID as in use, remove its entry from the lru * list. * - * This list is protected by cache_mutex. + * + * cqm_rmid_limbo_lru - list of currently unused but (potentially) dirty RMIDs. + * + * This list is contains RMIDs that no one is currently using but that + * may have a non-zero occupancy value associated with them. The + * rotation worker moves RMIDs from the limbo list to the free list once + * the occupancy value drops below __intel_cqm_threshold. + * + * Both lists are protected by cache_mutex. */ -static LIST_HEAD(cqm_rmid_lru); +static LIST_HEAD(cqm_rmid_free_lru); +static LIST_HEAD(cqm_rmid_limbo_lru); /* * We use a simple array of pointers so that we can lookup a struct @@ -120,37 +168,43 @@ static int __get_rmid(void) lockdep_assert_held(&cache_mutex); - if (list_empty(&cqm_rmid_lru)) - return -EAGAIN; + if (list_empty(&cqm_rmid_free_lru)) + return INVALID_RMID; - entry = list_first_entry(&cqm_rmid_lru, struct cqm_rmid_entry, list); + entry = list_first_entry(&cqm_rmid_free_lru, struct cqm_rmid_entry, list); list_del(&entry->list); return entry->rmid; } -static void __put_rmid(int rmid) +static void __put_rmid(unsigned int rmid) { struct cqm_rmid_entry *entry; lockdep_assert_held(&cache_mutex); + WARN_ON(!__rmid_valid(rmid)); entry = __rmid_entry(rmid); - list_add_tail(&entry->list, &cqm_rmid_lru); + entry->queue_time = jiffies; + entry->state = RMID_YOUNG; + + list_add_tail(&entry->list, &cqm_rmid_limbo_lru); } static int intel_cqm_setup_rmid_cache(void) { struct cqm_rmid_entry *entry; - int r; + unsigned int nr_rmids; + int r = 0; + nr_rmids = cqm_max_rmid + 1; cqm_rmid_ptrs = kmalloc(sizeof(struct cqm_rmid_entry *) * - (cqm_max_rmid + 1), GFP_KERNEL); + nr_rmids, GFP_KERNEL); if (!cqm_rmid_ptrs) return -ENOMEM; - for (r = 0; r <= cqm_max_rmid; r++) { + for (; r <= cqm_max_rmid; r++) { struct cqm_rmid_entry *entry; entry = kmalloc(sizeof(*entry), GFP_KERNEL); @@ -161,7 +215,7 @@ static int intel_cqm_setup_rmid_cache(void) entry->rmid = r; cqm_rmid_ptrs[r] = entry; - list_add_tail(&entry->list, &cqm_rmid_lru); + list_add_tail(&entry->list, &cqm_rmid_free_lru); } /* @@ -171,6 +225,10 @@ static int intel_cqm_setup_rmid_cache(void) entry = __rmid_entry(0); list_del(&entry->list); + mutex_lock(&cache_mutex); + intel_cqm_rotation_rmid = __get_rmid(); + mutex_unlock(&cache_mutex); + return 0; fail: while (r--) @@ -313,6 +371,390 @@ static bool __conflict_event(struct perf_event *a, struct perf_event *b) return false; } +struct rmid_read { + unsigned int rmid; + atomic64_t value; +}; + +static void __intel_cqm_event_count(void *info); + +/* + * Exchange the RMID of a group of events. + */ +static unsigned int +intel_cqm_xchg_rmid(struct perf_event *group, unsigned int rmid) +{ + struct perf_event *event; + unsigned int old_rmid = group->hw.cqm_rmid; + struct list_head *head = &group->hw.cqm_group_entry; + + lockdep_assert_held(&cache_mutex); + + /* + * If our RMID is being deallocated, perform a read now. + */ + if (__rmid_valid(old_rmid) && !__rmid_valid(rmid)) { + struct rmid_read rr = { + .value = ATOMIC64_INIT(0), + .rmid = old_rmid, + }; + + on_each_cpu_mask(&cqm_cpumask, __intel_cqm_event_count, + &rr, 1); + local64_set(&group->count, atomic64_read(&rr.value)); + } + + raw_spin_lock_irq(&cache_lock); + + group->hw.cqm_rmid = rmid; + list_for_each_entry(event, head, hw.cqm_group_entry) + event->hw.cqm_rmid = rmid; + + raw_spin_unlock_irq(&cache_lock); + + return old_rmid; +} + +/* + * If we fail to assign a new RMID for intel_cqm_rotation_rmid because + * cachelines are still tagged with RMIDs in limbo, we progressively + * increment the threshold until we find an RMID in limbo with <= + * __intel_cqm_threshold lines tagged. This is designed to mitigate the + * problem where cachelines tagged with an RMID are not steadily being + * evicted. + * + * On successful rotations we decrease the threshold back towards zero. + * + * __intel_cqm_max_threshold provides an upper bound on the threshold, + * and is measured in bytes because it's exposed to userland. + */ +static unsigned int __intel_cqm_threshold; +static unsigned int __intel_cqm_max_threshold; + +/* + * Test whether an RMID has a zero occupancy value on this cpu. + */ +static void intel_cqm_stable(void *arg) +{ + struct cqm_rmid_entry *entry; + + list_for_each_entry(entry, &cqm_rmid_limbo_lru, list) { + if (entry->state != RMID_AVAILABLE) + break; + + if (__rmid_read(entry->rmid) > __intel_cqm_threshold) + entry->state = RMID_DIRTY; + } +} + +/* + * If we have group events waiting for an RMID that don't conflict with + * events already running, assign @rmid. + */ +static bool intel_cqm_sched_in_event(unsigned int rmid) +{ + struct perf_event *leader, *event; + + lockdep_assert_held(&cache_mutex); + + leader = list_first_entry(&cache_groups, struct perf_event, + hw.cqm_groups_entry); + event = leader; + + list_for_each_entry_continue(event, &cache_groups, + hw.cqm_groups_entry) { + if (__rmid_valid(event->hw.cqm_rmid)) + continue; + + if (__conflict_event(event, leader)) + continue; + + intel_cqm_xchg_rmid(event, rmid); + return true; + } + + return false; +} + +/* + * Initially use this constant for both the limbo queue time and the + * rotation timer interval, pmu::hrtimer_interval_ms. + * + * They don't need to be the same, but the two are related since if you + * rotate faster than you recycle RMIDs, you may run out of available + * RMIDs. + */ +#define RMID_DEFAULT_QUEUE_TIME 250 /* ms */ + +static unsigned int __rmid_queue_time_ms = RMID_DEFAULT_QUEUE_TIME; + +/* + * intel_cqm_rmid_stabilize - move RMIDs from limbo to free list + * @available: are there freeable RMIDs on the limbo list? + * + * Quiescent state; wait for all 'freed' RMIDs to become unused, i.e. no + * cachelines are tagged with those RMIDs. After this we can reuse them + * and know that the current set of active RMIDs is stable. + * + * Return %true or %false depending on whether we were able to stabilize + * an RMID for intel_cqm_rotation_rmid. + * + * If we return %false then @available is updated to indicate the reason + * we couldn't stabilize any RMIDs. @available is %false if no suitable + * RMIDs were found on the limbo list to recycle, i.e. no RMIDs had been + * on the list for the minimum queue time. If @available is %true then, + * we found suitable RMIDs to recycle but none had an associated + * occupancy value below __intel_cqm_threshold and the threshold should + * be increased and stabilization reattempted. + */ +static bool intel_cqm_rmid_stabilize(bool *available) +{ + struct cqm_rmid_entry *entry, *tmp; + struct perf_event *event; + + lockdep_assert_held(&cache_mutex); + + list_for_each_entry(entry, &cqm_rmid_limbo_lru, list) { + unsigned long min_queue_time; + unsigned long now = jiffies; + + /* + * We hold RMIDs placed into limbo for a minimum queue + * time. Before the minimum queue time has elapsed we do + * not recycle RMIDs. + * + * The reasoning is that until a sufficient time has + * passed since we stopped using an RMID, any RMID + * placed onto the limbo list will likely still have + * data tagged in the cache, which means we'll probably + * fail to recycle it anyway. + * + * We can save ourselves an expensive IPI by skipping + * any RMIDs that have not been queued for the minimum + * time. + */ + min_queue_time = entry->queue_time + + msecs_to_jiffies(__rmid_queue_time_ms); + + if (time_after(min_queue_time, now)) + break; + + entry->state = RMID_AVAILABLE; + *available = true; + } + + /* + * Fast return if none of the RMIDs on the limbo list have been + * sitting on the queue for the minimum queue time. + */ + if (!*available) + return false; + + /* + * Test whether an RMID is free for each package. + */ + on_each_cpu_mask(&cqm_cpumask, intel_cqm_stable, NULL, true); + + list_for_each_entry_safe(entry, tmp, &cqm_rmid_limbo_lru, list) { + /* + * Exhausted all RMIDs that have waited min queue time. + */ + if (entry->state == RMID_YOUNG) + break; + + if (entry->state == RMID_DIRTY) + continue; + + list_del(&entry->list); /* remove from limbo */ + + /* + * The rotation RMID gets priority if it's + * currently invalid. In which case, skip adding + * the RMID to the the free lru. + */ + if (!__rmid_valid(intel_cqm_rotation_rmid)) { + intel_cqm_rotation_rmid = entry->rmid; + continue; + } + + /* + * If we have groups waiting for RMIDs, hand + * them one now. + */ + list_for_each_entry(event, &cache_groups, + hw.cqm_groups_entry) { + if (__rmid_valid(event->hw.cqm_rmid)) + continue; + + intel_cqm_xchg_rmid(event, entry->rmid); + entry = NULL; + break; + } + + if (!entry) + continue; + + /* + * Otherwise place it onto the free list. + */ + list_add_tail(&entry->list, &cqm_rmid_free_lru); + } + + + return __rmid_valid(intel_cqm_rotation_rmid); +} + +/* + * Pick a victim group and move it to the tail of the group list. + */ +static struct perf_event * +__intel_cqm_pick_and_rotate(void) +{ + struct perf_event *rotor; + + lockdep_assert_held(&cache_mutex); + lockdep_assert_held(&cache_lock); + + rotor = list_first_entry(&cache_groups, struct perf_event, + hw.cqm_groups_entry); + list_rotate_left(&cache_groups); + + return rotor; +} + +/* + * Attempt to rotate the groups and assign new RMIDs. + * + * Rotating RMIDs is complicated because the hardware doesn't give us + * any clues. + * + * There's problems with the hardware interface; when you change the + * task:RMID map cachelines retain their 'old' tags, giving a skewed + * picture. In order to work around this, we must always keep one free + * RMID - intel_cqm_rotation_rmid. + * + * Rotation works by taking away an RMID from a group (the old RMID), + * and assigning the free RMID to another group (the new RMID). We must + * then wait for the old RMID to not be used (no cachelines tagged). + * This ensure that all cachelines are tagged with 'active' RMIDs. At + * this point we can start reading values for the new RMID and treat the + * old RMID as the free RMID for the next rotation. + * + * Return %true or %false depending on whether we did any rotating. + */ +static bool __intel_cqm_rmid_rotate(void) +{ + struct perf_event *group, *rotor, *start = NULL; + unsigned int nr_needed = 0; + unsigned int rmid; + bool rotated = false; + bool available; + + mutex_lock(&cache_mutex); + +again: + /* + * Fast path through this function if there are no groups and no + * RMIDs that need cleaning. + */ + if (list_empty(&cache_groups) && list_empty(&cqm_rmid_limbo_lru)) + goto out; + + list_for_each_entry(group, &cache_groups, hw.cqm_groups_entry) { + if (!__rmid_valid(group->hw.cqm_rmid)) { + if (!start) + start = group; + nr_needed++; + } + } + + /* + * We have some event groups, but they all have RMIDs assigned + * and no RMIDs need cleaning. + */ + if (!nr_needed && list_empty(&cqm_rmid_limbo_lru)) + goto out; + + if (!nr_needed) + goto stabilize; + + /* + * We have more event groups without RMIDs than available RMIDs. + * + * We force deallocate the rmid of the group at the head of + * cache_groups. The first event group without an RMID then gets + * assigned intel_cqm_rotation_rmid. This ensures we always make + * forward progress. + * + * Rotate the cache_groups list so the previous head is now the + * tail. + */ + rotor = __intel_cqm_pick_and_rotate(); + rmid = intel_cqm_xchg_rmid(rotor, INVALID_RMID); + + /* + * The group at the front of the list should always have a valid + * RMID. If it doesn't then no groups have RMIDs assigned. + */ + if (!__rmid_valid(rmid)) + goto stabilize; + + /* + * If the rotation is going to succeed, reduce the threshold so + * that we don't needlessly reuse dirty RMIDs. + */ + if (__rmid_valid(intel_cqm_rotation_rmid)) { + intel_cqm_xchg_rmid(start, intel_cqm_rotation_rmid); + intel_cqm_rotation_rmid = INVALID_RMID; + + if (__intel_cqm_threshold) + __intel_cqm_threshold--; + } + + __put_rmid(rmid); + + rotated = true; + +stabilize: + /* + * We now need to stablize the RMID we freed above (if any) to + * ensure that the next time we rotate we have an RMID with zero + * occupancy value. + * + * Alternatively, if we didn't need to perform any rotation, + * we'll have a bunch of RMIDs in limbo that need stabilizing. + */ + if (!intel_cqm_rmid_stabilize(&available)) { + unsigned int limit; + + limit = __intel_cqm_max_threshold / cqm_l3_scale; + if (available && __intel_cqm_threshold < limit) { + __intel_cqm_threshold++; + goto again; + } + } + +out: + mutex_unlock(&cache_mutex); + return rotated; +} + +static void intel_cqm_rmid_rotate(struct work_struct *work); + +static DECLARE_DELAYED_WORK(intel_cqm_rmid_work, intel_cqm_rmid_rotate); + +static struct pmu intel_cqm_pmu; + +static void intel_cqm_rmid_rotate(struct work_struct *work) +{ + unsigned long delay; + + __intel_cqm_rmid_rotate(); + + delay = msecs_to_jiffies(intel_cqm_pmu.hrtimer_interval_ms); + schedule_delayed_work(&intel_cqm_rmid_work, delay); +} + /* * Find a group and setup RMID. * @@ -322,7 +764,6 @@ static int intel_cqm_setup_event(struct perf_event *event, struct perf_event **group) { struct perf_event *iter; - int rmid; list_for_each_entry(iter, &cache_groups, hw.cqm_groups_entry) { if (__match_event(iter, event)) { @@ -336,17 +777,14 @@ static int intel_cqm_setup_event(struct perf_event *event, return -EBUSY; } - rmid = __get_rmid(); - if (rmid < 0) - return rmid; - - event->hw.cqm_rmid = rmid; + event->hw.cqm_rmid = __get_rmid(); return 0; } static void intel_cqm_event_read(struct perf_event *event) { - unsigned long rmid; + unsigned long flags; + unsigned int rmid; u64 val; /* @@ -355,23 +793,25 @@ static void intel_cqm_event_read(struct perf_event *event) if (event->cpu == -1) return; + raw_spin_lock_irqsave(&cache_lock, flags); rmid = event->hw.cqm_rmid; + + if (!__rmid_valid(rmid)) + goto out; + val = __rmid_read(rmid); /* * Ignore this reading on error states and do not update the value. */ if (val & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL)) - return; + goto out; local64_set(&event->count, val); +out: + raw_spin_unlock_irqrestore(&cache_lock, flags); } -struct rmid_read { - unsigned int rmid; - atomic64_t value; -}; - static void __intel_cqm_event_count(void *info) { struct rmid_read *rr = info; @@ -392,8 +832,8 @@ static inline bool cqm_group_leader(struct perf_event *event) static u64 intel_cqm_event_count(struct perf_event *event) { + unsigned long flags; struct rmid_read rr = { - .rmid = event->hw.cqm_rmid, .value = ATOMIC64_INIT(0), }; @@ -417,17 +857,38 @@ static u64 intel_cqm_event_count(struct perf_event *event) if (!cqm_group_leader(event)) return 0; - on_each_cpu_mask(&cqm_cpumask, __intel_cqm_event_count, &rr, 1); + /* + * Notice that we don't perform the reading of an RMID + * atomically, because we can't hold a spin lock across the + * IPIs. + * + * Speculatively perform the read, since @event might be + * assigned a different (possibly invalid) RMID while we're + * busying performing the IPI calls. It's therefore necessary to + * check @event's RMID afterwards, and if it has changed, + * discard the result of the read. + */ + raw_spin_lock_irqsave(&cache_lock, flags); + rr.rmid = event->hw.cqm_rmid; + raw_spin_unlock_irqrestore(&cache_lock, flags); + + if (!__rmid_valid(rr.rmid)) + goto out; - local64_set(&event->count, atomic64_read(&rr.value)); + on_each_cpu_mask(&cqm_cpumask, __intel_cqm_event_count, &rr, 1); + raw_spin_lock_irqsave(&cache_lock, flags); + if (event->hw.cqm_rmid == rr.rmid) + local64_set(&event->count, atomic64_read(&rr.value)); + raw_spin_unlock_irqrestore(&cache_lock, flags); +out: return __perf_event_count(event); } static void intel_cqm_event_start(struct perf_event *event, int mode) { struct intel_cqm_state *state = &__get_cpu_var(cqm_state); - unsigned long rmid = event->hw.cqm_rmid; + unsigned int rmid = event->hw.cqm_rmid; unsigned long flags; if (!(event->hw.cqm_state & PERF_HES_STOPPED)) @@ -473,15 +934,19 @@ static void intel_cqm_event_stop(struct perf_event *event, int mode) static int intel_cqm_event_add(struct perf_event *event, int mode) { - int rmid; + unsigned long flags; + unsigned int rmid; + + raw_spin_lock_irqsave(&cache_lock, flags); event->hw.cqm_state = PERF_HES_STOPPED; rmid = event->hw.cqm_rmid; - WARN_ON_ONCE(!rmid); - if (mode & PERF_EF_START) + if (__rmid_valid(rmid) && (mode & PERF_EF_START)) intel_cqm_event_start(event, mode); + raw_spin_unlock_irqrestore(&cache_lock, flags); + return 0; } @@ -518,8 +983,10 @@ static void intel_cqm_event_destroy(struct perf_event *event) list_replace(&event->hw.cqm_groups_entry, &group_other->hw.cqm_groups_entry); } else { - int rmid = event->hw.cqm_rmid; - __put_rmid(rmid); + unsigned int rmid = event->hw.cqm_rmid; + + if (__rmid_valid(rmid)) + __put_rmid(rmid); list_del(&event->hw.cqm_groups_entry); } } @@ -527,11 +994,10 @@ static void intel_cqm_event_destroy(struct perf_event *event) mutex_unlock(&cache_mutex); } -static struct pmu intel_cqm_pmu; - static int intel_cqm_event_init(struct perf_event *event) { struct perf_event *group = NULL; + bool rotate = false; int err; if (event->attr.type != intel_cqm_pmu.type) @@ -568,10 +1034,24 @@ static int intel_cqm_event_init(struct perf_event *event) } else { list_add_tail(&event->hw.cqm_groups_entry, &cache_groups); + + /* + * All RMIDs are either in use or have recently been + * used. Kick the rotation worker to clean/free some. + * + * We only do this for the group leader, rather than for + * every event in a group to save on needless work. + */ + if (!__rmid_valid(event->hw.cqm_rmid)) + rotate = true; } out: mutex_unlock(&cache_mutex); + + if (rotate) + schedule_delayed_work(&intel_cqm_rmid_work, 0); + return err; } @@ -606,22 +1086,76 @@ static struct attribute_group intel_cqm_format_group = { .attrs = intel_cqm_formats_attr, }; +static ssize_t +max_recycle_threshold_show(struct device *dev, struct device_attribute *attr, + char *page) +{ + ssize_t rv; + + mutex_lock(&cache_mutex); + rv = snprintf(page, PAGE_SIZE-1, "%u\n", __intel_cqm_max_threshold); + mutex_unlock(&cache_mutex); + + return rv; +} + +static ssize_t +max_recycle_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned int bytes, cachelines; + int ret; + + ret = kstrtouint(buf, 0, &bytes); + if (ret) + return ret; + + mutex_lock(&cache_mutex); + + __intel_cqm_max_threshold = bytes; + cachelines = bytes / cqm_l3_scale; + + /* + * The new maximum takes effect immediately. + */ + if (__intel_cqm_threshold > cachelines) + __intel_cqm_threshold = cachelines; + + mutex_unlock(&cache_mutex); + + return count; +} + +static DEVICE_ATTR_RW(max_recycle_threshold); + +static struct attribute *intel_cqm_attrs[] = { + &dev_attr_max_recycle_threshold.attr, + NULL, +}; + +static const struct attribute_group intel_cqm_group = { + .attrs = intel_cqm_attrs, +}; + static const struct attribute_group *intel_cqm_attr_groups[] = { &intel_cqm_events_group, &intel_cqm_format_group, + &intel_cqm_group, NULL, }; static struct pmu intel_cqm_pmu = { - .attr_groups = intel_cqm_attr_groups, - .task_ctx_nr = perf_sw_context, - .event_init = intel_cqm_event_init, - .add = intel_cqm_event_add, - .del = intel_cqm_event_del, - .start = intel_cqm_event_start, - .stop = intel_cqm_event_stop, - .read = intel_cqm_event_read, - .count = intel_cqm_event_count, + .hrtimer_interval_ms = RMID_DEFAULT_QUEUE_TIME, + .attr_groups = intel_cqm_attr_groups, + .task_ctx_nr = perf_sw_context, + .event_init = intel_cqm_event_init, + .add = intel_cqm_event_add, + .del = intel_cqm_event_del, + .start = intel_cqm_event_start, + .stop = intel_cqm_event_stop, + .read = intel_cqm_event_read, + .count = intel_cqm_event_count, }; static inline void cqm_pick_event_reader(int cpu) @@ -730,6 +1264,16 @@ static int __init intel_cqm_init(void) } } + /* + * A reasonable upper limit on the max threshold is the number + * of lines tagged per RMID if all RMIDs have the same number of + * lines tagged in the LLC. + * + * For a 35MB LLC and 56 RMIDs, this is ~1.8% of the LLC. + */ + __intel_cqm_max_threshold = + boot_cpu_data.x86_cache_size * 1024 / (cqm_max_rmid + 1); + snprintf(scale, sizeof(scale), "%u", cqm_l3_scale); str = kstrdup(scale, GFP_KERNEL); if (!str) { -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/